ASG Airsoft

A certified hand cannon in Airsoft form! This iconic beast of a pistol is fully licensed from Dan Wesson for maximum realism as well as making for a great skirmish weapon. 

Created by ASG with their brand new design, this gas non-blowback CO2 revolver if for those of you who want something a little more chunky in the palm when the enemy is in your sights!

A certified hand cannon in Airsoft form! This iconic beast of a pistol is fully licensed from Dan Wesson for maximum realism as well as making for a great skirmish weapon. 

Created by ASG with their brand new design, this gas non-blowback CO2 revolver if for those of you who want something a little more chunky in the palm when the enemy is in your sights!

If you're looking for the very smallest of LiPo batteries, you've found it. Measuring 4x1.3x2cm, this battery can be used to power the FCU in the V12 engine, in addition to other HPA systems with a mini-JST type connector.

The battery has a voltage of 7.4v, a capacity of 250mAh and a discharge rate of 20C and features a cable length of roughly 10.5cm

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

A high powered Airsoft Battery, designed to be used in highly tuned top-end gearbox. The battery comes in a 'stick' configuration, with two adjoined cells in one block, allowing the battery to be squeezed into even the tightest of buffer tubes. 

A Pump Action Airsoft 6mm BB Tri-Shot Shotgun licensed by Action Sports Games from FRANCHI to provide one of the most iconic shotguns around, the SPAS-12 Shotgun.

A pack of 25 downgrade shells for Dan Wesson Revolvers designed to take the power down on CO2 Powered Revolvers.

Fitted with a tactical sliding stock for enhanced practicality in urban environments, this is a pump action, single shot spring powered shotgun. Please note that the FPS on this shot gun is over the standard 350 and will not be allowed in most CQB sites but can be used outdoor as a dmr platform

A None Blowback Airsoft 6mm BB Pistol, designed to look and function like the Dan Wesson Revolver Series.

An AEP battery designed for use in a range of electronic Airsoft pistols/compact SMGs. Ideal for Airsoft Electric Pistols including the ASG CZ99 and EU-Series 18C AEPs.

The ASG P-09 has been a sure choice for Airsofters since it's inital release way back when. It has established itself as a Pistol of choice for IPSC/Target Shooters, as well as Airsoft players running modern loadouts. This update to the Pistol offers an 'Optics Ready Slide', which has a Mount Plate for a Dr. Sight or similar Compact Red Dot Sight. It also includes High Profile Ironsights so that you can still use them if you install a Red Dot Sight on the Slide, as well as a Vented Slide and gorgeous Gold Threaded Barrel. Powered by CO2, this is a ferious Pistol with a strong Blowback that will perform really well in all weather conditions.

A Gas powered non-blowback CO2 Airsoft 6mm BB revolver created by ASG with their brand new design, transforming the Dan Wesson range of revolvers from 'Party Piece' to 'skirmishable platform'. This set is supplied with high-power shells so if you're hitting the field with this wheelgun, pick up some Power Down Shells to keep the marshalls happy!

Spare Magazines for your awesome Steyr Scout sniper rifle! 32 Round capacity, it can be filled with a speedloader or the fill adaptor included with the Steyr Scout. Polymer construction.

Another extremely well-equipped pre-upgraded sniper rifle hits the market, but this one is different. The ASG Steyr Mannlicher Scout rifle is based on the real-world design, the brainchild of legendary rifle designer Jeff Cooper. This rifle provides everything you need to snipe with the utmost efficiency. An unusual looking beast, the Steyr Scout is designed by the best, and I have to say, the Airsoft version lives up to my every expectation of this phenomenal platform...

Another extremely well-equipped pre-upgraded sniper rifle hits the market, but this one is different. The ASG Steyr Mannlicher Scout rifle is based on the real-world design, the brainchild of legendary rifle designer Jeff Cooper. This rifle provides everything you need to snipe with the utmost efficiency. An unusual looking beast, the Steyr Scout is designed by the best, and I have to say, the Airsoft version lives up to my every expectation of this phenomenal platform...

If you're wanting some serious carnage, that is sure to put a big grin on your face, this grenade launcher should be right up you're alley.

With it's standalone design featured in such iconic films as the John Wick series, it takes 40mm MOSCART allowing you to shower your targets in a wall of BBs.

Featuring an alloy barrel and high density body, it comes complete with a foldable stock, removable foregrip. Time to cause some havoc!

Instantly fill your revolver with a new set of BB carry shells! Suitable for both 4" and 8" Dan Wesson revolvers. This method is much quicker than replacing each shell individually, and makes reloading your Airsoft revolver a dream.

A None Blowback Airsoft 6mm BB Pistol, designed to look and function like the Dan Wesson Revolver Series.

A bottle of 3300 high quality, competition grade polished 0.20g BBs from ASG, which undergo a strict quality control process and are carefully selected to achieve a higher standard of BB over the traditional Blaster series, which are already spot on. The 0.20g BBs are the baseline weight for Airsoft Guns are are appropriate for indoor sites, testing and high speed guns / grenade launchers.

if you're looking for an exciting new sidearm that nobody has yet, the ASG CZ P-10C CO2 GBB Pistol is exactly that! Based on the real steel CZ Firearms P-10C, complete with official licencing, the ASG P-10C boasts full metal construction, ferocious recoil, a beastly muzzle report and impressive slide speed thanks to its CO2 power source. As we might expect from an officially licensed platform from ASG, the P-10C is adorned with flawlessly engraved trademarks and built like a tank, making it a fantastic choice for collectors and skirmishers alike. 

Internally, the P-10C is a unique design but is similar to Glock and EU series pistols in the layout of the controls, meaning an easy transition for EU series users and no training scars to work around. Meeting the bar set by the best modern semi-automatic pistols out there, the P-10C also boasts interchangeable back straps, an ambidextrous slide lock/release, a comfortable ergonomic pistol grip with aggressive texturing and front slide serrations for flawless wet weather handling. If you're the type of skirmisher who appreciates a unique, lesser-seen platform with top-notch build quality, the CZ P-10C from ASG belongs in your holster!

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

Proven in battle, everyone has use for Ni-Mh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Deans/T-Plug connector.

This Ni-Mh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most often seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells and has a wire length of roughly 8cm.

The ASG SAKO TRG M10 follows the ASG tradition of offering high end Airsoft sniper rifles with full real steel licencing as an alternative to the lightweight and skirmish focussed VSR style platforms. Equally at home in the hands of a sniper as it is in the collection of a skirmisher who values realism, this SAKO TRG M10 replica boasts full metal construction, a whopping 610mm long 6.03mm tightbore inner barrel and a unique dial adjustable HOP-up with a secondary screw to adjust the HOP-up from left to right!

The unique HOP-up system is just the tip of the iceberg when it comes to the innovative features of the ASG SAKO TRG M10 which benefits greatly from being based on a unique high end real steel precision rifle. As one would expect, the TRG has a CNC machined free-floated handguard, fluted outer barrel, ergonomic pistol grip and well designed ambidextrous controls, but what you might not expect is the functional loaded chamber indicator and fully adjustable trigger, bringing much sought-after real steel features into the Airsoft world. If you are a sniper with a desire to skirmish a highly realistic and fully licenced platform this is one of the best we have seen yet!

The ASG SAKO TRG M10 follows the ASG tradition of offering high end Airsoft sniper rifles with full real steel licencing as an alternative to the lightweight and skirmish focussed VSR style platforms. Equally at home in the hands of a sniper as it is in the collection of a skirmisher who values realism, this SAKO TRG M10 replica boasts full metal construction, a whopping 610mm long 6.03mm tightbore inner barrel and a unique dial adjustable HOP-up with a secondary screw to adjust the HOP-up from left to right!

The unique HOP-up system is just the tip of the iceberg when it comes to the innovative features of the ASG SAKO TRG M10 which benefits greatly from being based on a unique high end real steel precision rifle. As one would expect, the TRG has a CNC machined free-floated handguard, fluted outer barrel, ergonomic pistol grip and well designed ambidextrous controls, but what you might not expect is the functional loaded chamber indicator and fully adjustable trigger, bringing much sought-after real steel features into the Airsoft world. If you are a sniper with a desire to skirmish a highly realistic and fully licenced platform this is one of the best we have seen yet!

A screw-top bottle that contains 3300 high quality, competition-grade 0.25g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.25g BBs are a great option for those playing outdoors, particularly if you have a high speed gun and want to keep overall BB costs down whilst maintaining top-tier performance.

If you're a fan of high-end real steel pistols favoured by competition shooters, the CZ Shadow 2 must be on your radar. This version of the ASG CZ Shadow 2 CO2 GBB Pistol is the Orange Special Edition, meaning we are treated to CNC aluminium grips and an enlarged magazine release finished in eye-catching metallic orange, along with several internal improvements and tighter tolerances across the design.

The real steel Shadow 2 sits side by side with the best 2011/Hi-capa platforms as the pistol of choice for those focussed on accuracy, particularly IPSC and other competition shooters. Famed for its fantastic trigger, superb ergonomics and excellent accuracy, the Shadow 2 is a lesser-seen platform in Airsoft terms, reserved for the elite who appreciate a classy full metal sidearm with a lofty real steel pedigree.

Innumerable improvements are present in this Special Edition variant of the ASG Shadow 2, including a fixed outer barrel with barrel spacers, a stainless steel recoil spring plug for reduced friction and tightened tolerances between the slide and frame for a smoother overall feel. The result is an incredibly accurate platform for a sidearm despite its ferocious recoil from its CO2 power source, ideally suited to competitive shooters and classy skirmishers with tastes for the finer things in life!