CYMA Airsoft

If you're looking for flip-up iron sights to finish off your build, the CYMA Flip-up Iron Sights for 20mm Picatinny Rail are ideal. The set includes the front and rear sight and both mount to 20mm Picatinny rails. Windage and elevation are fully adjustable via the dials on each sight and the rear sight offers two apertures for aiming; a fine aperture for bright conditions and accurate semi-auto fire and a wider one for low-light and full auto mayhem. 

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

If you've got some old MWS, CGS or Hi-Capa mags to refurbish, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve is what you need! This set is a complete replacement original knocker valve (aka output valve), the valve at the top of the magazine which is struck by the valve knocker. 

Compatibility-wise, this should fit Tokyo Marui MWS ZET System Mags, CYMA CGS GBBR magazines, Tokyo Marui Hi-Capa mags and some TM clone Hi-Capa magazines (though this is not guaranteed). Whether you like to keep spares on hand so you're always battle-ready or your mags are a bit tired and need a revamp, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve will do the trick!

A complete V6 gearbox designed as a replacement for CYMA P90 AEGs to breathe new life into your weapon.

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

An Airsoft Electric Pistol which features a MOSFET for a rapid rate of fire and consistent performance.

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov. 

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

A pre-assembled, ready to use complete gearbox set designed for use in 6mm Airsoft BB replica M14 AEGs. With all the components assembled and in place, this gearbox is ready to be dropped into place in your M14 AEG, replacing any old and worn out gearboxes.

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

An Airsoft 6mm BB AEG Light Machine Gun, designed for a Support Role, and is based on the Russian Built RPK-74. The weapon features a real wood Stock and Handguard, with a full Alloy Body and Internals, with a Polymer Pistol Grip and Imitation Bakelite Magazine.

If you're committed to the AK platform but need something which can go toe-to-toe with modern AR-15s, the CYMA CM.113 AKM Zco Custom AEG; Kestrel Basic ETU is exactly that! Boasting the solid alloy and steel build CYMA AKs are known for and bristling with ultra-modern Zco-style parts, this beast is also fully upgraded on the inside, equipped with CYMA's high-speed E-Edition internals making it ready for 11.1V LiPo batteries with a rate of fire that is hard to beat!

Inside, you'll find 13:1 high speed CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium piston head and cylinder head, a high speed Neodymium magnet motor, low-resistance wiring and a 6.03mm tightbore inner barrel. Also inside is the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. AKs with programmable triggers are a bit of a rarity; it's great to see CYMA keeping the AK platform competitive with modern ARs!

Whether you're working on a modern Russian Armed Forces loadout, a PMC kit or simply love the unashamedly aggressive styling of Zco external parts, the CYMA CM.113 AKM Zco Custom AEG; Kestrel Basic ETU will put a big smile on your face!

A replacement Alloy butt plate for CYMA branded AK series replicas.

A tough Polymer constructed magazine for a range of CYMA/WELL series Spring Sniper Rifles (check compatibility), which offers a whopping 100rnds to lay down on the enemy from afar. 

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

A 6mm BB Airsoft replica flash hider, designed for CYMA manufactured AK47 and AK74 replica Airsoft Electric Guns. This replica flash hider is an incredibly simple yet effective way to add an additional element of realism to your AEG AKs.

Looking to give your CM.706 Sniper rifle a bit more range? The CYMA Upgrade set for CM.706 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

If you're looking to give your CM.700/700A/708 sniper rifle a bit more range the CYMA spring upgrade set will be what you're after, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

If you want to add a modern touch to your AK, the CYMA Aluminium KeyMod Handguard for AK-47/74 is what you need! This CNC Aluminium handguard is equipped with KeyMod negative space attachment slots at 3, 6, & 9 o'clock with a 20mm Picatinny rail running along the top, ready for a PMC-style forward-mounted red dot sight. 

On each side, we are treated to a pre-installed 20mm Picatinny rail adapter for KeyMod, giving you the option of using more common 20mm Picatinny accessories or removing the adapters to mount more modern KeyMod solutions. The handguard itself is constructed in two parts, allowing you to use both or simply the upper or lower handguard, depending on your build requirements. If you're going for the modern tactical AK look, the CYMA Aluminium KeyMod Handguard for AK-47/74 is perfect for your build!

If you are searching for the best CQB platform out there, the CYMA Platinum SLR Airsoft Works AKS-74U AEG; Tracer HOP-up is definitely worth considering. Absolutely brimming with upgraded parts including an EShooter Kestrel Basic ETU/MOSFET, 13:1 CNC steel gears, CNC aluminium piston and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, this lil AK shoots like a laser and its built-in tracer HOP-up gives it an instinct aiming and psychological warfare advantage when exchanging fire at kissing distance.

The new addition to this latest SLR AKS-74U variant is the Kestrel Basic ETU/MOSFET system from EShooter, replacing the original CYMA Zeus MOSFET and offering more advanced features than ever before. These include 3-round burst and binary trigger programmable fire control options, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. 

Externally, the SLR AKS-74U definitely meets the high standards CYMA AKs are known for, with full metal construction including a steel receiver and top cover, CNC aluminium "Solo Krink" handguard, AK Billet stock and Synergy Mini-Comp with full licencing from SLR Rifleworks. The modern furniture enhances handling considerably and also allows modern accessories to be easily mounted, from suppressors to red dot sights, vertical grips and tactical flashlights.

Whether CQB is your poison or you have an aggressive playstyle and like to get right in the enemies' face, the CYMA Platinum SLR AKS-74U will be an asset to your arsenal. Built like a tank with almost as much firepower, don't let its size fool you, this compact AK comes with full-size performance!

If you need a new nozzle for your CYMA CM.057 or Real Sword Dragonov SVD, CYMA has you covered! The Aluminium Nozzle for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and compatible with the CYMA CM.057 SVD/SVU AEG series and the Real Sword Dragunov SVD AEG. 

This is a replacement original part specifically designed for the Real Sword pattern SVD gearbox used in the CYMA CM.057 series and is not compatible with A&K SVDs or others. If you've built a beast of a DMR with your SVD and you want to get ahead of any potential parts failures this is a great part to have in the toolbox!

If you've lost or damaged important parts from your CYMA's mag release, this should sort you out! The CYMA Bolt Catch is a replacement original part. Compatibility-wise, this set is intended for CYMA AEGs with alloy receivers, if your bolt catch got broken in a freak Airsoft accident, this set should get you back in the action!