CYMA Airsoft

If you are running an AEP and you want a polymer retention holster here is your opportunity! The CYMA Polymer Retention Holster is designed to fit the CM.126, CM.126S and CM.132S AEPs. This holster holds your pistol in place via a polymer tab which indexes with the trigger guard, keeping it nice and secure as you run and ready for a fast draw when you press the button on the outside.

The holster itself is supplied mounted to a polymer "paddle" mount which will fit any belt of up to 2" in width and mounts via a rotary interface, meaning it should be compatible with rotary interfaces on MOLLE holster mounts, shoulder harnesses and belt mounts of different styles and draw heights. The rotary interface allows you to set your preferred draw angle using the included Allen key by loosening the bolt in the rear of the mount, repositioning it and tightening the bolts back down, giving you many more options than a standard fabric universal holster. Finally, AEP users are no longer held back by a lack of modern holster options!

If you need mags for your CYMA or Bolster Tuned CM.058 Bizon SMG, here you go! The CYMA 170rnd Mid-Cap Magazine for CM.058 Bizon AEGs is a spring-loaded mid-cap magazine with a capacity of 170 BBs, loaded through the fill/feed port using a speed loader or loading tool.

The magazine exterior matches the real thing perfectly, made from strong high density polymer, complete with "9x18" calibre markings on the side. This magazine is designed specifically for the CYMA CM.058 but will also work flawlessly with the Bolster Tuned CM.058.

If you are looking to get into Airsoft and have a thing for the world renowned and iconic AK47, look no further than the CM.522.

Keeping things simple, this AK is a great starter rifle and a great budget friendly gun, that is reliable, thanks to it's alloy gearbox and internals and also lightweight thanks to it's polymer construction.

The gun comes with a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity right out of the box.

If you're looking to revamp your old SR25 why not take a walk on easy street and replace the whole gearbox? The CYMA CM.098 SR25 V2 Long Gearbox Set w/Motor is the exact gearbox used in their CM.098 SR25 series and should be compatible with Classic Army style SR25 AEGs which use the version 2 long gearbox (Classic Army, CYMA and A&K). This gearbox is well equipped, and includes a MOSFET/ETU prewired in, a quick change spring system, an M130 spring and also includes a high torque Neodymium magnet motor. Perfect to fix up an old big boy AR!

If you are looking for a pump action shotgun to lay down the law in CQB this is one of our favourites! The CM.360M M3 Super 90 from CYMA is a spring-powered pump action shotgun which uses the Tokyo Marui Tri-shot system, meaning with each trigger pull you get 3 BBs headed downrange from 3 separate inner barrels, improving hit probability by providing a shotgun-like spread pattern.

We have seen Tri-shot shotguns before, and even M3 Super 90 style ones, so what makes this so special? Well, it is full metal, giving it a solid feel in the hands and a decent but not over-the-top weight, and CYMA has added a few frills to this ancient TM design to add extra realism for those that seek it, most notably the moving mock bolt carrier and charging handle, which has been omitted from Airsoft M3 Super 90 shotguns until now. If you have a taste for realism and you need a spring tri-shot to expand your arsenal this would be a great pick!

If you are looking for an affordable AR36C replica the CYMA CM.011 is the perfect thing. This AEG is competitive straight out of the box, shooting at 315fps and very accurate on our indoor range. This is a perfect starting AEG for someone with a run-and-gun play style who will appreciate the low weight and advanced design of the AR36 platform.

Lost a handguard pin from your sneaky SMG-5? That's a shame, but fortunately, we have the solution! The CYMA Handguard locking pin is designed for the CM.041 SD6 AEG series, but may also fit other SMG-5 SD6 AEGs, though we are unable to confirm which ones. The pin is constructed from alloy and is packaged as a single pin, so if you have lost both pins make sure you order two!

Constructed from heavy duty polymer, the most apparent and eye-catching feature of this magazine is the transparent side panels showcasing the 9 red and gold mock shotgun shells within. that adds to the realistic aesthetic.

The magazine itself holds 100 rounds and is a mid-cap magazine and is loaded from the top using a speed loader. It being a mid-cap design also means that there is no 'battle rattle' from loose BBs or wheel winding as you would get in a high-cap magazine. The external of the magazine also features a raised ridge pattern for ease of use and provides extra grip even when wearing gloves.

This magazine is compatible with the CYMA CM.102, but may potentially fit other replicas, although please note that this has not been tested.

A 6mm BB Airsoft Electric non-blowback Pistol, based on the iconic original 1911 pistol perfect for if you are wanting to get into Airsoft skirmishing. The CM.123 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent.

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into battle right away.

The CYMA Blue Limited Edition series are a premium line of Airsoft Electric Guns which featured upgraded internals over what you would normally expect from a tactical Airsoft SMG-5 replica.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

If you're looking for flip-up iron sights to finish off your build, the CYMA Flip-up Iron Sights for 20mm Picatinny Rail are ideal. The set includes the front and rear sight and both mount to 20mm Picatinny rails. Windage and elevation are fully adjustable via the dials on each sight and the rear sight offers two apertures for aiming; a fine aperture for bright conditions and accurate semi-auto fire and a wider one for low-light and full auto mayhem. 

A complete V6 gearbox designed as a replacement for CYMA P90 AEGs to breathe new life into your weapon.

Short and compact like it's real world counterpart, but with some full metal weight behind it and some solid internals, it still packs a punch! 

This Airsoft stockless variation of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, enemy insurgents won't last long with this shotgun making quick work of them!

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

If you have had a mishap with your CYMA CM.028 and cracked the battery tray you aren't the first and you likely won't be the last! The CYMA Charging Handle Base/Battery Tray for CM.028 AK47 AEG is designed to replace the battery tray inside TM pattern AK rifles in the event that it gets broken or damaged. Nothing ruins your AK like the charging handle sliding around loosely in the receiver so if you have a CM.028 that is worse for wear this affordable replacement part could be the key to fixing it up!

If you have damaged your HOP-up unit and are looking for a replacement, CYMA are now offering their original HOP-up units as an aftermarket part. This unit is for the CM.041K and CM.041PDW AEGs, but will not fit the full sized CM.041 AEGs. The unit is constructed from polymer and comes complete other than the HOP-up rubber. The HOP unit, slider, c-clip and HOP nub are all included, so if you have lost or damaged one of these bits you are in luck!

If you've had a cut-off lever failure or you're the techy type who keeps parts on hand just in case, the CYMA Cut Off Lever for V2 Gearbox is ideal. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

If you're looking for a full metal DMR-ready AEG with slick styling, the CYMA Platinum CM.097 M4/AR-15 AEG; Kestrel Basic ETU is a fine choice! It's part of the newly revamped CYMA Platinum line and boasts the same reinforced high-speed internals as the original, except now it's even better with the EShooter Kestrel Basic MOSFET added to the mix!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. It keeps your gearbox cycling at maximum efficiency and with pre-cocking set, you can achieve an incredibly snappy trigger response perfect for rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

Even better than the original when it comes to downrange effect while maintaining the superb external quality CYMA Platinum is known for, the CM.097 is a fantastic intermediate option with sleek modern styling and plenty of pre-upgraded parts. If you're ready to take your rifling skills to the next level, the CYMA Platinum CM.097 M4/AR-15 AEG; Kestrel Basic ETU is calling your name!

If you've got some old MWS, CGS or Hi-Capa mags to refurbish, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve is what you need! This set is a complete replacement original knocker valve (aka output valve), the valve at the top of the magazine which is struck by the valve knocker.

Compatibility-wise, this should fit Tokyo Marui MWS ZET System Mags, CYMA CGS GBBR magazines, Tokyo Marui Hi-Capa mags and some TM clone Hi-Capa magazines (though this is not guaranteed). Whether you like to keep spares on hand so you're always battle-ready or your mags are a bit tired and need a revamp, the CYMA CGS / MWS / Hi-Capa GBB Magazine Output Valve will do the trick!

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

If you need a new nozzle for your CYMA CM.057 or Real Sword Dragonov SVD, CYMA has you covered! The Aluminium Nozzle for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and compatible with the CYMA CM.057 SVD/SVU AEG series and the Real Sword Dragunov SVD AEG.

This is a replacement original part specifically designed for the Real Sword pattern SVD gearbox used in the CYMA CM.057 series and is not compatible with A&K SVDs or others. If you've built a beast of a DMR with your SVD and you want to get ahead of any potential parts failures this is a great part to have in the toolbox!

A replacement side mount plate for CMYA AK47/74 series Airsoft AEG weapons, which when fitted allows users to install AK style side-mounted scope mounts.

An Ergonomic Pistol Grip for M4/M16/AR Platform Airsoft Electric Guns, which will provide a far more comfortable grip than traditional Pistol Grips. It is easy to install, and simply needs the removal of your original Pistol Grip to fit it, by re-installing the screws that secure it to your Gearbox. The Grip includes a Quick Release Motor Baseplate that also has an integrated Motor Height Adjustment. If you want to customise your AR Platform Airsoft Gun, then this is a great place to start.

A 40 Round magazine for the CYMA CM.708 Bolt Action Airsoft Rifle.

A 20rnd spare or replacement Magazine for the CYMA branded CM.706 Airsoft Sniper Rifle. If you want to spend more time set up in your nest and less time walking back to the safe zone for a reload, then you need to stock up on Magazines to prevent you having to give away a good position. Constructed from a mix of Alloy and Polymer, these Magazines can be filled by hand or using a Speedloader, and are a great way to stay in the fight for longer. The design of the Magazine allows them to 'spring' out of the Mag Well when released, making them much easier to remove.

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov.