FMA Airsoft

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

A Polymer constructed set of adaptors for railed helmets, allowing you to install 20mm accessories to your helmet setup.

This PVC 3D effect patch is velcro backed, and ideal for placing on Hats, Rigs, Backpacks, or anywhere with a free space of Velcro. The Patch features the M72 LAW (Light Anti-Tank Weapon), which is a portable unguided anti-tank weapon that fires a 66mm dumbfire munition.

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you need an easy way to avoid blue-on-blue situations in the dark confines of CQB or urban skirmishes, this affordable helmet marker light from FMA should stop your mates from shooting you! This light offers a simple red flash mode which can be activated by pressing the centre of the light and turned off again in the same way.

The backing of the light is constructed from high density polymer to keep it rigid and the front is constructed from transparent rubber. The Helmet Marker Light is designed to be mounted to an Airsoft helmet and comes packaged with a pair of adhesive velcro strips, one female velcro and one male velcro so you can slap it on your lid easily right away!

If you need a set of lightweight iron sights to keep you covered in the event your primary sight goes down, these would work a treat! The FMA Front & Rear Flip-up Sight Set For 20mm Rails are constructed from high density polymer with steel screws and springs, and each sight is spring-loaded for fast and easy deployment when you need them.

The front sight is adjustable using an M4/AR-15 front sight adjustment tool and the rear aperture can be moved left to right without the need for tools via the dial on the right side of the rear sight. The rear sight also offers two different apertures for aiming; a small one for long range shooting and semi-automatic fire, and a larger one for close range, full auto and low light shooting. Deploying the sights is quick and easy, only requiring a press of the button on the left side of each sight, after which they will spring up into position under spring tension.

These sights mount to any 20mm Picatinny rail and are perfect for any Airsoft rifle in need of a slick set of spring-loaded sights to finish it off!

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

If you are looking for that last small item to give your helmet/kit setup some added flair, check out the Signal light from FMA. This light can be attached to either velcro or a MOLLE rig and comes complete with a wireless charging kit, MOLLE mount, helmet mount and Velcro.

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs!

The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!

If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs!

The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

A lightweight and breathable Airsoft half face mask which has fabric sides, allowing you to aim down your sights much easier than with conventional lower face protection.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.

A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

This is an updated version of the Dummy PRC-152 we had in a while ago. This time around it has much nicer Polymers, a better look, tougher construction and the dummy battery can now be removed.

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you need to carry some extra mags into battle you need this! The FMA Kydex Double Holster for Pistol Magazines fits the most common 9mm and other small magazines. This includes magazines for pistols such as EU/GLOCK, CZ P-09, B9 and F226.

Slide your magazines in the holsters and the polymer retention system will keep them secure. If you're struggling to insert or remove magazines, there is a Phillips head screw in the centre of the holster that can be adjusted to tighten or loosen the magazine insert area.

The holster attaches to belts using the paddle back, it fits on belts with a 2" width or less, meaning it should fit on most common tactical belts. With the FMA Kydex Double Holster for Pistol Magazines you can carry your pistol magazines easily and with style, just make sure to bring enough for the battlefield!

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If your plate carrier has the "last chicken in the shop" look, a dummy SAPI plate will have it looking just like the real thing. The FMA SAPI Dummy Ballistic Plate for Plate Carriers is designed to fit most Airsoft plate carrier vests, with approximate dimensions of 31.3 x 25.4 x 1.9cm. The set only includes a single plate, so if you need a plate for the front and the rear of your carrier you will need to order two. 

Styled to match real Small Arms Protective Inserts, the FMA Dummy Ballistic Plates are perfect for any plate carrier that likes to crumple up and can really elevate your look in terms of realism. The idea behind polymer dummy plates is that they allow a replica plate carrier to keep an authentic shape without the burden of weighted or real SAPI armour plates. 

An additional perk is that any hits to your plate will be far less painful but still give off a nice loud "thwack" so you know you've been hit. If your plate carrier is looking a bit sad, this should give it the solid look of the real deal!

If you've got wires hanging off your primary getting in the way, the FMA Low-profile Admin Clips for 20mm Picatinny Rail; 60PCS Set will fix that! Designed to do double duty as rail covers and wire admin clips, these nifty little pieces of polymer keep your wires out of the way thanks to a recess cut in the centre allowing your wiring to run through. These mount to 20mm Picatinny rails and all you need to do to install them is clip them on!

The set also includes a number of clips for running your wires at the side of your rail, giving you plenty of options, all of which keep your setup neat and tidy. Creating a textured surface to enhance grip thanks to the slight separation between each clip, the Low-profile Admin Clips can also be used to add traction to handguards of various lengths, avoiding the need to cut conventional rail covers to length. If you want your primary to look more professional, these are the key!

If you're looking for a stylish tactical helmet but want to separate yourself from the FAST-wearing masses, the Next Generation Spec-Ops Ballistic Helmet Replica is the unique lid you've been looking for! This helmet is a great replica of one of the most modern, up-and-coming ballistic helmets, known in the real steel world as the "Caiman Ballistic Helmet". Naturally, this helmet does not provide any ballistic protection but it will make you look utterly slick in game! 

Furnished with an NVG mount up front and skeletonised ARC rails on each side, the Next-Gen Ballistic Helmet is more than a match for FAST, Airframe and MICH helmets, with a uniquely modern style to mark it out from the rest. Inside, we are treated to an OCC-style rotary adjustment dial which keeps the helmet stable on your head regardless of whether you mount an action camera to the front or navigation lights to the sides. If you want to set yourself apart from the crowd and run one of the latest and greatest real steel helmet designs in replica form, here you go!

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

A velcro backed Patch which is made from PVC material and has a 3D effect. It is perfect for placing on Rigs, Hats, Backpacks, or anywhere you can find that has some velcro space available. This patch features the infamous RPG-7, which is a dumb-fire portable Rocket Propelled Grenade launcher that is fired from the shoulder.

If you run several different pistols and don't want to swap pouches, the FMA Polymer Pistol Magazine Pouch is the right pouch for you! This pouch works similarly to real steel Fastmag magazine pouches, offering adjustability via external rubber straps, suitable for EU-series, Hi-capa, F226, B9 & 1911 magazines but not suitable for particularly large mags like Desert Eagle, Five-seveN or MK.23 magazines. 

The Polymer Pistol Magazine Pouch can be mounted either to 1.5-inch belts or MOLLE loops via the polymer mount on the rear. If variety in sidearms is your thing, this is the mag pouch for you!

This headset adapter is designed to mount COMTAC I/II model headsets to ARC Rails commonly found on Ops Core style Helmets. If you own a compatible pair of Active Ear Defenders and want to mount them directly to your Helmet rather than using a bulky headband, the the EXF ARC Rail Adapters for SRD Headsets is the way to go.