New Airsoft Guns & Products

If your budget is tight but you need an accessory-ready primary with a MOSFET on board, the S&T M4/AR-15 URX4 11.5" Sports Line AEG; ETU Version should be on your shopping list! Made from strong high density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, the URX4 11.5" makes a fantastic multi-role primary for newcomers, ready to be dressed up with the most modern accessories out there with suprising performance to back it up!

On the inside, the S&T URX4 9.5" features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto, ideal for gaining the edge in CQB environments.

Whether this will be your first Airsoft gun or you're adding a lightweight option to a collection of full metal guns, you're in good hands with the S&T M4/AR-15 URX4 11.5" Sports Line AEG; ETU Version. Feature-packed at a remarkable price and fully upgradable with the most common upgrade parts, the URX4 11.5" Sports Line makes an excellent backup or a solid starting point to your Airsoft adventure!

If a lightweight, low-cost M4 AEG with a practical and tactical feature set is on your to buy list, the S&T M4/AR-15 URX4 9.5" Sports Line AEG; ETU Version fits the bill! Made from strong high density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, the URX4 9.5" AEG is extremely fast to point and easy to move with, rocking an M-LOK handguard and 20mm railed receiver, ready to be dressed up with accessories.

On the inside, the S&T URX4 9.5" features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

Ideal for mobile playstyles and new skirmishers with limited physical strength, the S&T M4/AR-15 URX4 9.5" Sports Line AEG; ETU Version really brings the heat to the low-cost AEG market. If you like to move fast and maintain high energy throughout the skirmish day, the S&T URX4 9.5" Sports Line is your ideal primary!

If you're going for a special forces style loadout but don't have planetoid-sized biceps, the S&T ST416D Sports Line AEG; ETU Version should be right up your street! Constructed almost entirely from high-density polymer, the ST416D is a great choice for those with less physical strength or those with a fast-moving playstyle seeking a platform as agile as they are. High-density polymer may be less realistic, but it will not show damage as readily as a full metal platform might, thanks to its dyed nature, allowing it to maintain its looks far better than a painted or anodised finish.

On the inside, the ST416D features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version of the ST416D now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

Having all of these features in such an affordable platform makes the S&T ST416D Sports Line AEG; ETU Version a sure hit for beginners or veterans looking for a lightweight "easy mode" primary!

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

If you're after an affordable battle-ready AR setup with a programmable trigger, this bundle is for you! The DA-C04-EGL Totally Tantastic Platform Package combines the DA-C04-EGL from Delta Armory with a TO552 holographic-style red dot sight, a PEQ-15 laser/flashlight combo, an Element Stubby Vertical Foregrip and 2 extra 120rnd DMAG Mid-cap magazines.

Please note, this set doesn't include a battery and charger. If you need these, we recommend a 7.4V 1100mAh LiPo in crane/nunchuck config and a LiPo balance charger.

If you're in search of a long AR to complete your outdoor loadout, the Specna Arms SA-V30 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is a fine choice. Boasting the top-notch build quality Specna's ONE™ series has become known for, this is the updated version, fitted with the superb EShooter Kestrel Basic ETU/MOSFET.

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking with 6 levels to choose from and several quality-of-life functions such as low battery warning and cycle completion. The result is a remarkably snappy trigger when pre-cocking is set, the perfect feature for someone who needs fire supremacy in CQB to get the job done! Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you superb accuracy potential and the latest HOP-up design for M4/AR-15 platforms.

The Specna Arms SA-V30 ONE™ is a full-length M4 platform with a 15-inch outer barrel and a steel 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, making it a beast outdoors, and with the right upgrades, a DMR capable of dominating any firefight. Its super-light aluminium handguard gives you plenty of space for a nice C-clamp grip, making it easy to steer between targets at an impressive pace. No matter what you plan to do with it, this Specna Arms SA-V30 is a great addition to your armoury!

If you're the techy type seeking high-quality MOSFET wiring, FPS Softair has your back with the High Conductivity MOSFET Signal Cable! Made with 19 pure copper capillaries coated in chrome to enhance conductivity, this signal wire is specifically designed to provide maximum efficiency while avoiding being too thick and impinging on gearbox internals. We all know the pain of discovering your pinion gear has shredded your wiring. Thankfully, this FPS Signal Wire sidesteps this issue entirely!

The capillaries are protected with an FEP (Fluorinated Ethylene Propylene) coating, keeping the wire flexible to be routed through tight spaces, ideal for whatever custom setup you have in mind. If you're an ambitious tech with some wild custom build plans, FPS Softair High Conductivity MOSFET Signal Cable will definitely come in handy!

If you're building out your M14 AEG, add the SHS Reinforced Tappet Plate for Version 7 Gearbox to keep it feeding reliably! This reinforced polymer tappet plate is designed for Version 7 gearboxes, making it a sure fit in most M14 AEGs and potentially compatible with other V7 gearbox-equipped designs.

The strong polymer construction of this tappet ensures your platform feeds reliably, even at high speed or in high FPS DMR builds. If you want your M14 to last the ages, this reinforced tappet plate belongs inside!

If you're upgrading your AK-47/74 AEG, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for AK-47/74 AEG is an essential part! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a super strong nozzle for a high-performance AK AEG build, you won't find any better than the FPS Softair ERGAL Air Nozzle with Inner O-Ring!

If you're building out your MP5/SMG-5 AEG for high performance, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for MP5/SMG-5 AEG will ensure it's reliable and accurate! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a super strong nozzle for a beastly MP5/SMG-5 AEG build, the FPS Softair ERGAL Air Nozzle with Inner O-Ring is the way to go!

If you're upgrading your Cybergun/VFC SCAR-H, the ERGAL Air Nozzle with Inner O-Ring for VFC SCAR-H AEG from FPS Softair is essential for reliability and accuracy! Made from super-strong CNC-machined ERGAL, this nozzle is about as strong as AEG nozzles get, ideal for high-performance builds intended to last. Compatibility-wise, this nozzle is designed specifically for the VFC-manufactured SCAR-H (sometimes branded Cybergun) and may also fit D-Boys SCAR-H AEGs, but won't work with other SCAR-H replicas.

ERGAL is the trade name for 7075 aluminium alloy, known for its exceptional strength and low weight, rivalling some steels in strength while staying light as a feather by comparison. This nozzle also features an internal O-ring designed to minimise air leaks for maximum consistency and ensure the nozzle stays perfectly aligned for reliable feeding with every shot. If you need a top-of-the-range nozzle for your VFC SCAR-H custom build, the FPS Softair ERGAL Air Nozzle with Inner O-Ring for VFC SCAR-H AEG is ideal!

Designed to improve conductivity for a boost in rate of fire and trigger response, FPS Softair Low Resistance Wiring is ideal for custom builders seeking the slickest, most efficient setup possible. This wiring is supplied in a 2-meter length and is 1.7mm in diameter, making it ideal for AEG wiring, even in setups with relatively small wiring routes. If you're the techy type, FPS Softair Low Resistance Wiring should be in your parts stash!

If you've got broken Maten magazines, this should help! The PTS Syndicate Enhanced Feed Lips for EPM-LR GBB Magazine; Part [483] are made from strong high density polymer, made even stronger with their enhanced design intended to reduce weak points in the original EPM-LR GBBR magazine's feed lips, along with improving feeding reliability.

These feed lips are strictly for the .308-style EPM-LR GBBR magazine supplied with the PTS Syndicate Mega Arms MML .308 MATEN GBBR and won't work with 5.56-style EPM GBBR mag. If you've got a pile of Maten mags which need feed lips, treat them to PTS Syndicate Enhanced Feed Lips for EPM-LR GBB Magazine; Part [483]!

If you've got broken PTS EPM GBBR magazines, this will sort them out! The PTS Syndicate Enhanced Feed Lips for EPM GBB Magazine; Part [2] are made from strong high density polymer, made even stronger with their enhanced design intended to reduce weak points in the original EPM GBBR magazine's feed lips, along with improving feeding reliability.

These feed lips are compatible with PTS EPM GBBR magazines (KWA system) supplied with the Radian Model 1 and Mega Arms Maten MKM GBBRs, but won't work with other GBBR magazines. If your PTS GBBR is sitting out summer skirmishes due to broken feed lips, the PTS Syndicate Enhanced Feed Lips for EPM GBB Magazine; Part [2] will get it back out doing what it does best!

This Kill Flash is designed for 20mm objective lenses, mainly Vector Optics sights, but it may be compatible with other brands. It is constructed from aluminium and can also act as a crude lens protector; however, a standalone lens protector is still preferable.

When installed, the honeycomb design of this kill flash limits the amount of light allowed to enter the lens, which on a sunny day will result in a less fuzzy and distracting image, making it much easier to pick out details/targets. The other benefit of this kill flash is that it prevents the sun from bouncing off your lens and lighting your lens up like bonfire night, which would massively give your position away.

If you've got an old AEG to repair, CYMA's 18:1 Steel Gear Set for V2/3 Gearbox might be the fix you need! This standard ratio gearset is made from steel and compatible with any version 2 or version 3 gearbox-equipped AEG. Being a standard 18:1 ratio set, these gears will turn once for every 18 motor revolutions, giving you a great balance between speed and torque.

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 60rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 60bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

If you're looking for a discrete finishing touch to your custom build, the Airsoft Artisan Custom Flat G-Style Trigger for M4/AR-15 AEG is ideal! Patterned after a very well-regarded real steel custom trigger of the "Super Dynamic" line, this flat trigger is flawlessly CNC machined from aluminium and includes realistic raised "G" markings on each side.

Being a flat trigger design, the G-Style Trigger is fantastic for pumping out rapid semi-auto shots, and its wide surface encourages a consistent straight back pull for maximum accuracy. As the icing on the cake of a speedy custom build, you won't find better than the Airsoft Artisan Custom Flat G-Style Trigger for M4/AR-15 AEG!

If you are building a Hi-capa to suit your own style and needs, consider this to add some unique looks to your popular pistol! Introducing the Airsoft Masterpiece EDGE Custom "Twister" Guide Rod for TM Hi-capa 4.3 GBB, a CNC machined aluminium guide rod with a fancy fluted "Twister" design! This guide rod is finished perfectly, with a smooth friction-reducing anodised finish applied to ensure the beautiful colours stand the test of time and that your recoil spring does not hang up, causing a reduction in cyclic rate.

If you're decking out your KeyMod handguard and need a hint of style, the 5KU B5 KeyMod Hand Stop; Solid is the perfect finishing touch! Made from CNC-machined aluminium and finished in spicy metallic red, the Solid KeyMod Hand Stop is ideal for topping off a speed soft or 3-gun style build.

The Hand Stop can be mounted in either orientation and can be used to prevent your hand from overshooting the handguard or to pull back against as a makeshift foregrip.

If you're looking for a robust M-LOK sling point, look no further than the Airsoft Artisan M-LOK Sling Mount! Made from steel for maximum strength, this sling point is capable of mounting both hook-style and standard strap slings. It mounts to M-LOK negative space attachment slots, ideally used as a front sling point.

If you need a stylish finishing touch for your M-LOK build, the Airsoft Artisan AD M-LOK Hand Stop is the perfect addition! Made from superb quality CNC-machined aluminium with realistic details and a rock-solid finish, this hand stop mounts to M-LOK attachment slots and only takes up a single slot, making it ideal for short platforms with limited space.

The AD Hand Stop can be oriented in either direction, ideal for limiting your hand position and avoiding overshooting the handguard after a reload or using as a foregrip to pull your primary back into your shoulder to keep it controlled. Its curved profile makes it comfortable in either orientation, and its textured surface provides optimal gripping qualities in any weather condition. If you're dressing up your M-LOK primary, the Airsoft Artisan AD M-LOK Hand Stop is a highly functional and aesthetically pleasing option!

Motor worn out? The SHS Long Shaft Motor is a cheap, reliable replacement! This long shaft standard speed motor is designed for M4/AR-15, AR-9, P90, G3 and SMG-5 AEGs and is pre-fitted with a pinion spring and D-type pinion gear.

The D-type pinion is the strongest pinion design out there, eliminating the chance of this high-stress part loosening over time and damaging the motor shaft. Whether you need an affordable motor to get your pride and joy back into battle, or you're playing around with Airsoft internals and don't want to damage expensive parts, the SHS Long Shaft Motor is ideal!

If you're feeling that carry handle vibe and want an optic on top, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is what you need. Following the real steel trend of mounting modern optics to the old school AR carry handle, this mount is made from CNC-machined aluminium with the Aimpoint Micro mounting standard/footprint, making it compatible with most T1 and T2 clones, along with other optics with the same footprint.

This mount is compatible with practically any M4/M16 carry handle, including A1 and A2 fixed carry handles and M4A1/M16A4 removable carry handles. Please note, depending on which optic you choose, you may need to source longer screws to attach your optic to this mount to guarantee compatibility. If you're working on an old meets new build, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is an essential part!

If your M4/AR15 AEG's charging handle is looking a bit tired, why not replace it with some aggressive ambidextrous style? The 5KU Ambidextrous Charging Handle is constructed from alloy and will fit most M4 AEGs with a standard version 2 gearbox. Its ambidextrous design makes it perfect for lefties or those who often find themselves swapping between shoulders on the battlefield.

This charging handle has been designed to mimic the style of popular real steel charging handles and features a skull design between its wings, aggressive! If you fancy a new style for your M4, a new charging handle is the perfect way to add some personality and flair, the 5KU Ambidextrous Charging Handle is a great choice!

If you want to improve your 5.1 Hi-Capa's accuracy, range and consistency, a barrel upgrade is a great start! The Laylax Nine Ball 6.00mm Steel Tightbore Inner Barrel is a huge improvement over stock 6.03mm brass tightbore barrels, and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for Tokyo Marui Hi-Capas and clones and should fit most of them, provided they are 5.1 editions. This barrel has an inner diameter of 6mm, which means that you will have to use high-quality BB ammo to ensure no blockages. However, when used with a high-quality BB, you will have the most consistent performance available, as there will be next to no air loss when shooting.

Do you want to push your VSR/BAR-10 sniper rifle to the next level? The Maple Leaf Steel Cylinder Head for VSR-10 will help you achieve this dream. This machined stainless steel cylinder head has been optimised to make it more consistent and make your platform more reliable. The thread has an optimal length to maximise the cylinder volume, and the shape of the cylinder head has been slightly tweaked for a better air seal.

Give your favourite sniper rifle a new breath of life with a reinforced upgrade cylinder; your VSR/BAR-10 will thank you greatly!

If you're building up your Hi-Capa with speed as the objective, you need the Airsoft Masterpiece DVC Flared Magwell for Hi-Capa GBB Pistols! Styled after the real steel DVC flared magazine well, this extension to the base of your grip helps guide your magazines in during an adrenaline-fueled reload, whether you're on the skirmish field or cleaning a course of fire in an IPSC competition.

A flared magazine well extension also enables "eyes-up" reloads so you can continue to scan for the next target as you bring your pistol back into action, an essential skill to have if you aim to be the fastest shooter you can. Compatibility-wise, this magwell is for the original Tokyo Marui Hi-Capa polymer frame and should fit most similar designs but won't work with aluminium frames or alternative frame designs. For a touch of style with a side of speed, you can't ask for better than the DVC Flared Magwell for Hi-Capa GBB Pistols from Airsoft Masterpiece!

If you're running a compact platform with limited rail space or simply seek a sprinkle of "gucci" for your build, the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight is well-suited to the task! Made from precisely machined aluminium and patterned after an up-and-coming alternative to popular "Skiff" and "Hydra" mounts, the K High Rise Mount is phenomenally built and packs a lot of functionality into a relatively simple-looking mount!

The set includes what is known as a "Diving Board", a section of rail which attaches to the front of the optic mount, ideal for a PEQ or DBAL laser unit. This can be removed to reduce weight and improve field of view, revealing the minimalist skeletonised design of the mount itself. On each side, the K High Rise Mount features a single M-LOK attachment slot, allowing you to mount an M-LOK rail to each side (with the M-LOK nut removed) to add even more accessories, should the mission require it.

The K High Rise Mount is designed for 20mm Picatinny rails and is compatible with red dot sights using the Aimpoint Micro footprint/mounting standard, including most T1 and T2 clones. If your mates all run Hydras and Skiffs, take a walk on the wild side and make them jealous with the Airsoft Artisan K High Rise Mount with Extension for T1/T2 Red Dot Sight!

The EMG Strike Industries Handguard is a flawless replica of the real steel Strike Industries VOA handguard, equipped with 10 M-LOK slots, finger grooves for maximum traction and stylish ports to keep weight to a minimum. It is constructed from CNC aluminium, guaranteeing durability whilst minimising the overall weight. It is compatible with most Golden Eagle M870 shotguns, excluding ones with an extended top rail or short handguards; fitting may be required with others.

It is equipped with a row of 4 M-LOK slots running along the bottom and two additional slots on each side. Thankfully, there is plenty of clearance between the mock mag tube and handguard, meaning these M-LOK slots are ready to rock with M-LOK accessories, including vertical or angled foregrips, tactical flashlights or 20mm rail adapters for those who prefer 20mm accessories. The VOA provides superb gripping qualities and feels fantastic, with or without gloves; a major enhancement compared to the original 870 handguard.