Specna Arms SA-PJ02 PRIME™ AK-74N AEG

If you love a bit of real wood and steel, you'll be down with the Specna Arms SA-PJ02 PRIME™ AK-74N AEG! A flawless replica of the real steel AK-74N, this beast keeps the best bits of the original SA-J02 EDGE, adding in a steel outer barrel for realistic weight distribution and PRIME™ series internals to keep the enemy at bay!

Inside, we're kitted out with the best internals Specna has to offer, including CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, a reinforced piston with a full rack of steel teeth, a reinforced tappet plate for reliable feeding, and a CNC aluminium piston head, cylinder head and nozzle for maximum long-term durability. The cylinder is also CNC machined from steel, as is the spring guide.

The main boasts for the SA-PJ02 are its Dark Matter™ Brushless Motor and Gate ASTER™ SE MOSFET, impressive parts rarely seen in mass-produced AEGs. The Dark Matter™ motor provides incredible speed and torque, boasting minimal heat build-up due to its brushless design. The ASTER™ MOSFET offers programmable fire controls, adjustable pre-cocking and active braking, a near infinite number of trigger sensitivity adjustments and the ability to connect to your phone or mobile device using Bluetooth if you add the Gate Blu-link(not included) to your setup. If you're after an old-school cool AK with advanced internals, you're in good hands with the SA-PJ02 PRIME™ AK-74N AEG!

Starting at the tip of the 16.3-inch alloy outer barrel, we can find an alloy AK-74 muzzle brake, the perfect muzzle device for an authentic Cold War-era AK-74. The muzzle brake mounts to realistic 24mm CW male threading, making it compatible with 24mm CW threaded Russian-style suppressors. To remove the muzzle device, you will need to hold the detent pin in the front sight down to allow the muzzle brake to be unscrewed. The easiest way we found to do this is to hold the pin down with a small flathead screwdriver. One of the stand-out external features of this AK is its steel outer barrel, giving it weight distribution far closer to a real rifle than alloy equivalents, not to mention far greater robustness. 

The front sight of the SA-PJ02 AK-74N mounts directly to its outer barrel and provides an adjustable front post with protective wings to ensure an accidental bump or scrape does not render your sights useless. As part of the classic AK aesthetic, we can find a dummy cleaning rod running parallel to the outer barrel, through the front sight block and gas block. This isn't intended for cleaning an Airsoft barrel and is just for the look.

Moving further down the outer barrel, we come to the dummy gas block, made from alloy with an authentic finish. This connects to the stamped steel gas tube, which meets the real wood upper handguard via a steel handguard cap. The lower handguard surrounds the outer barrel and is retained by its own handguard cap, which includes a sling point on the left side, ideally for hook-type slings. 

The handguards are constructed from real wood, featuring bulges on either side to fill out the hand and a satin finish which looks authentic without being so shiny it catches the light and gives you away in the field. Real wood makes a big difference to the feel of this AK, giving it maximum points for authenticity and a look which cannot be matched by faux wood equivalents. 

The trunnion block follows just behind, providing the mounting point for the classic AK tangent rear iron sight, which provides multiple graduations for adjustment and a fine rear sight notch to align with the front sight post. The sight can be adjusted by pressing the buttons on either side of the sight notch and moving the notch back and forth on its base. This sight type benefits over aperture sights in its field of view, allowing you to more effectively track moving targets and avoid tunnel vision.

The lever on the right side of the trunnion block is the handguard disassembly lever. This lever allows you to quickly remove the upper handguard and gas tube, just like a real AK, though this isn't really any use in Airsoft terms. This is one of the many perks of using the VFC-style external construction over the TM style: you can strip it like a real AK for extra nerd points!

Next up, we find the receiver, which is constructed from realistic stamped steel with a matt "nanocoat" finish, which shows through all of the authentic details while being hard-wearing and robust. The receiver has standard AK-style controls on the right side, with a fire selector lever which doubles as a dust cover when in safe mode, and a charging handle attached to an authentic black dummy bolt carrier. In typical AK style, the first position on the fire selector is fully automatic, and the lowermost position is semi-automatic. Each fire mode is denoted by a crisply engraved authentic Russian Cyrillic marking, adding some realism to this already very realistic AK.

Over on the left side, we can find an AK quick-detach mounting rail, allowing for authentic Russian scopes to be mounted, or 20mm Picatinny rail mounts if you prefer a more modern Western optic. The receiver also provides several authentic dummy rivets, all found in the correct place for this AK variant.

To access the Magnus™ adjustable HOP-up unit of the SA-PJ02 AK-74N, simply hold the charging handle to the rear to reveal this new rotary adjustable HOP-up unit design. The HOP-up allows you to tune the SA-PJ02 for different ammo weights, seeking the flattest possible trajectory. The Magnus™ design shows a lot of promise, being a TDC design which applies pressure directly to the top of the bucking to minimise side-to-side shot deviation. The Helium™ HOP-up bucking also has the capability to lift heavy BBs, should the mission require it. 

The receiver top cover of the AK-74N is also constructed from stamped steel and is the appropriate design for an AK-74, with ribs stamped into the upper surface to provide additional strength whilst keeping the material thin and lightweight. The battery compartment is beneath the top cover and accessible by pressing the button at the rear of the top cover, after which it should come straight off, revealing the mini-Tamiya connector. For the SA-PJ02, we recommend a 7.4V 1300mAh LiPo in slim stick configuration. With the battery connected and installed, you can place the top cover back into the AK-74N, align the button with the hole in the rear of the top cover, and pull the charging handle to lock the cover down if necessary.

The pistol grip of the SA-PJ02 AK-74N is a standard AKM/AK-74-type pistol grip, with diamond checkering on either side to ensure the rifle stays firmly in your grasp in any weather condition. Just ahead of the pistol grip, we can find the trigger guard and magazine release assembly, constructed from steel to provide solid magazine locking and ample rigidity. The magazine release is placed in the centre of the receiver and is accessible from either side of the AEG, offering both left and right-handed users an easy reload process. The magazine retention system of the AK platform is a "rock and lock" motion, requiring you to first index the front "hook" on the magazine inside the receiver, then rock the magazine to engage the catch.

The stock of the AK-74N is constructed from polymer with an imitation wood effect and has an authentic colouration for AK furniture, with a varied grain effect and satin finish. The faux wood both looks great and keeps the rifle lightweight and manoeuvrable, not to mention cost-effective and maintenance-friendly. The bottom of the stock also features a steel sling loop, which pairs well with the front sling point on the lower handguard cap, providing appropriate mounting apparatus for a two-point sling, but ideally suited to an AK47/74 sling. The butt plate is constructed from steel and is appropriately untextured to match the real thing. Those used to textured rubber butt plates; there is no room for comfort in this utilitarian design, though you can add a rubber butt plate extension to get a taste of Western luxury!

Inside, the SA-PJ02 is ready to rock, equipped with pre-upgraded parts to rival the best. Inside the AETHER™ version 3 gearbox, we're equipped with 16:1 CNC steel high-speed gears running on 8mm J-cage ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium nozzle, piston head and cylinder head and a reinforced tappet plate to ensure feeding is reliable. 

The incredible Dark Matter 27K brushless motor provides impressive torque and speed; an impressive piece of hit usually sold on the aftermarket for a substantial price. Also inside is the Gate ASTER SE MOSFET, an advanced electronic trigger system offering programmable fire controls through the Gate Control Station app, adjustable pre-cocking for a ferocious trigger response in semi-auto, cycle timing control, adaptive active braking, adjustable trigger sensitivity and voltage control, all of which combine to give this AK a wealth of functionality that is hard to beat.

If you love an old-school build bringing new-school heat downrange, the Specna Arms SA-PJ02 PRIME™ AK-74N AEG should be your next primary. Built to an exceptional standard on the outside and packed with the best internal parts we've ever seen in a mass-produced Airsoft AEG, the SA-PJ02 brings the AK platform back to the cutting-edge!

Features

• Full metal construction - Mostly steel for a hefty feel!
• Real wood handguard & stock - Maximum authenticity
• Steel outer barrel, receiver & top cover - Realistic weight distribution
• 6.02mm Tightbore inner barrel - Great accuracy potential
• Gate ASTER™ SE MOSFET Pre-installed - One of the best out there, near unlimited features
• 24mm CW Russian threaded barrel - Choose tracers & suppressors for 24mm CW
• Quick change spring system - Easy power tuning, no need to open the gearbox
• Ambidextrous magazine release - Centrally positioned, great for lefties
• Adjustable open tangent iron sights - Great field of view
• Magnus™ Rotary HOP-up unit - A new design, finer adjustment increments & better setting retention
• Textured pistol grip - Appropriate for modern AK variants, textured panels for optimal traction
• Russian AK dovetail side mount - Compatible with Russian AK optics or 20mm rail adapters
• Realistic disassembly - VFC style, all pins and rivets, no screws!
• Front and rear sling points - Ideal for AK47/74 replica slings, suitable for most two-point slings
• Fixed stock with steel butt plate - Gorgeous real wood with a high-quality finish
• Storage compartment in the stock - Ideal for tactical sweeties, accessory batteries, etc.
• Version 3 AETHER™ Gearbox:
  • Reinforced Piston with a steel full tooth rack
  • Reinforced Tappet plate
  • CNC Aluminum piston head
  • CNC Aluminium cylinder head
  • CNC Aluminium nozzle
  • CNC Steel cylinder
  • CNC Steel quick-change spring guide
  • CNC Steel 16:1 gearset
  • 8mm J-CAGE Bearings
  • Specna Arms Dark Matter 27K Brushless Motor
  • Gate ASTER SE MOSFET
• Learn more about the ASTER™ MOSFET and what it does here
• Compatible with AK side rail scope mounts: M-ETAL 20mm Scope Mount For AK | NUPROL AK Side Scope Mount
• Compatible with AK-47/74 AEG magazines - 5.45 Style to please the stitch counters, but most will work

Package Includes

• Specna Arms SA-PJ02 PRIME™ AK-74N AEG
  • 125rnd S-MAG Mid-cap magazine x 2
  • Speed Loader