- Carbon Fibre outer barrel
- Ultra-light - Only 1.4KG!
- Compatible with VSR-10 mags & HOP-up parts
Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.
The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.
With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If you think you know it all about Airsoft..think again! Storm Airsoft out of France has produced one of the most cutting-edge sniper rifle designs we have seen in years, both on the outside and internally. The PC1 is a bullpup design and constructed almost entirely from fibre-reinforced polymer and carbon fibre, with CNC aluminium and polycarbonate internal parts.
Built for pure performance without the hindrance of following real steel designs, the PC1 tips the scales at an absolutely minuscule 1.4kg and handles like a dream, with a full complement of ambidextrous controls and comfortable ergonomic furniture. The innovation does not end here, quite the opposite!
The internals of the PC1 are completely unique, save for its VSR-10 spec HOP-up rubber and unbridged VSR-10 spec tightbore inner barrel. There is no spring, no gas and no gearbox to drive this thing; instead, we have an electro-pneumatic internal system which uses an electromagnetic solenoid to release each shot via a trigger microswitch. This means the bolt pull is easier than comparable sniper rifles and the PC1 can be more compact and lightweight than any VSR platform, with no compromises in performance and no external power source.
Starting at the front we can see a thread protector mounted to the tip of the real carbon fibre outer barrel. The use of real carbon fibre is a big part of what makes the PC1 so ridiculously light and it also adds a nice hint of sci-fi modernity to this novel platform. The thread protector conceals 14mm CCW male threads beneath, meaning tracers or suppressors are a go!
Following the barrel rearwards, we come to the handguard which boasts a combination of M-LOK negative space attachment slots at the 3 and 9 o'clock positions, 20mm Picatinny rail at 12 o'clock with a short section at 6, and an ergonomic ribbed handguard further back. The upper 20mm rail is of ample length to allow for large scopes to be mounted, measuring a total of 39cm front to back. The lower 20mm rail is ideally situated for bipod attachment, but this rifle is so light we doubt you will be needing one!
The M-LOK slots allow for rail covers, tactical flashlights or two-piece bipods to be mounted should the mission require them, giving us an up-to-date accessory attachment interface to match the state-of-the-art looks of the PC1. The ribbed handguard follows shortly behind the 6 o'clock Picatinny rail, being of a comfortable rounded profile with deep ribs for flawless gripping qualities and comfort.
The battery compartment of the PC1 is inside the ribbed handguard and allows for either an 11.1V or 7.4V LiPo to be used. The pre-installed battery connector is a mini-Tamiya, meaning most Airsofters will have a battery to suit this platform already. We found a 7.4V 1200mAh nun-chuck style stick is a decent fit inside the handguard but there is room inside for most batteries designed for M4/AR-15 buffer tubes. To access the battery compartment, simply remove the pin at the front of the handguard and pull it downwards to remove it.
The bolt handle runs just above the handguard and can be attached on either side of the PC1 in one of three different positions. This gives the PC1 the edge over other sniper rifles when it comes to left-handed use, allowing the user to mount the steel bolt handle wherever they find most intuitive. The three different positions provide 3 different power levels, with the first position giving us approximately 380 FPS on a 0.2g BB, the second providing 420 FPS and the frontal position giving us 450 FPS on a 0.2g BB. This means you can tune the power level to match that of your local site with no extra springs or other parts needed.
To get the most consistent power output from the PC1, a consistent bolt pull is required to charge a similar air volume each time you cock the rifle. This means, to get the tight FPS and extreme consistency the platform is capable of, you will need to practice pulling the bolt and shooting until you are cocking the rifle at a consistent speed, and all the way front to back. It is possible to "half cock" the PC1 and the result will be a low FPS shot due to the cylinder not being fully charged.
The bolt throw of the PC1 is backwards when compared to a VSR-10 or L96, requiring that you rotate the bolt, push it forward and then pull it backwards to load the rifle. Cocking the PC1 is smooth and effortless for most of the bolt's travel, but on the pullback, there is a spot of resistance as the cylinder reaches capacity. This is still far less resistance than a spring sniper rifle would provide, but it can take you by surprise if you aren't expecting it! Thankfully, the design of the bolt handle itself is enlarged and has rubber o-rings set into grooves on its surface, providing plenty of grip to overcome this.
The pistol grip of the PC1 is a short, slim, ergonomic design intended to allow you to get as low as possible in the prone position to make the best use of surrounding cover and concealment. The linear grooves on the front pair perfectly with the recessed dot texture on the sides to provide superb gripping qualities in any weather conditions. There is also an extension at the rear of the grip which meets the magazine well, forming what is known as a "thumbhole" stock. This provides a bit of extra support for the palm but unlike many thumbhole stocks, is spacious enough to allow for gloved use.
The safety catch is located just above the pistol grip on the right side and offers two positions denoted with raised letters. The F stands for fire, and the S stands for safe. With texture on its surface and perfect placement, the safety can easily be operated from a firing grip for right-handed shooters. To the rear of the pistol grip, we are treated to raised trademarks reading "PC1 R-Shot System" on each side.
The trigger itself is skeletonised to fit the ultra-modern aesthetic of the PC1, and looks fantastic as it is, though we are told aftermarket options in different colours are due for release soon. The trigger pull of the PC1 is absolutely exceptional, especially for a bullpup. The travel length can be measured in millimetres and the response is instant, as all the trigger does in this setup is deactivate the internal electro-magnetic solenoid to release the air compressed in the piston. Even with upgraded trigger parts, a VSR-10 would have to work very hard to compete with this light and responsive trigger.
On the right side of the stock, we can find the rotary HOP-up dial of the PC1. This rotary dial links to a TDC HOP-up unit inside which is compatible with unbridged VSR-10 type inner barrels and VSR-10 HOP-up rubbers. The dial adjusts in very fine increments with a tactile click with each, guaranteeing the HOP-up will retain its setting in the long term. The wealth of adjustment offered by this HOP-up system is almost unrivalled, offering 25 different positions for various BB weights. We recommend 0.32g BBs with the pre-installed Silverback HOP-up rubber and 6.05mm tightbore as this provided the best results in our tests.
Bringing up the rear we have a considerately designed stock with a raised cheekpiece and rubberised butt plate, with a pair of sling points, one on each side. The cheekpiece slopes upwards as it meets the receiver rail, providing perfect alignment with your choice of optical sight. The finish of the cheekpiece is smooth, unlike the textured surfaces across the rest of the rifle, meaning you can take aim without cheese-grating your face. The rubberised surface of the butt plate positively locks the PC1 into your shoulder, allowing for a respectable rate of fire despite its bolt-action operation.
The magazine well is right at the back, as we would expect for a bullpup configuration. There is no magazine release as such; the magazine itself functions as the release. To insert the VSR-10 magazine, you will first need to push the rear of the magazine in against the internal spring, then rock the front of the magazine forward to engage the retaining lug.
Like the bolt pull, this will take some practice to get right, and if you don't do it properly it can cause misfeeds. With a few practice runs, we found that reloading the PC1 is actually far faster than a VSR-10 once you get the technique down as it allows you to quickly flick the spent magazine out without searching for the tiny VSR mag release or ripping the mag out due to a tight-fitting mag well.
On the inside, the PC1 is nothing like any other Airsoft gun we have seen. The internal parts are all constructed from CNC-machined aluminium or polycarbonate; there is no low-grade alloy or horrible beige plastic anywhere to be seen. Storm Airsoft claim that you will never need to upgrade the PC1, and we don't doubt it! Nonetheless, we know Airsoft snipers have their own preferences when it comes to HOP-up and inner barrel parts, and thankfully the PC1 will not hold them back thanks to its compatibility with VSR-10 inner barrels and HOP-up rubbers.
If you are looking for a platform that takes a walk on the wild side, taking a tight line around conventions to redefine the Airsoft sniper rifle, this is it. The PC1 looks like it is straight out of deep space with its gorgeous modernistic visual language and brings over some pioneering engineering which is certain to change the game. If you aren't afraid to try something new, you'll have a great time with the Storm Airsoft PC1!
Features
- Radical reinvention of the Airsoft sniper rifle
- 6.05mm Tightbore inner barrel - Provided by Silverback Airsoft
- 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
- Ultra-light build - Majority 30% Fibre Glass/70 Polymer mix, real carbon fibre outer barrel - Only weighs 1.4 kg!
- Swappable bolt handle - Install it on the left or right side in 3 different positions for different power levels
- Ribbed ergonomic handguard - Very comfortable with plenty of grip, with or without gloves
- M-LOK Slots on each side - Ready for M-LOK accessories or 20mm rail adapters for M-LOK
- 20mm Picatinny railed receiver - Ready for your choice of optical sight
- 20mm Picatinny rail at 6 o'clock - Ready for your bipod (you won't need one, this thing weighs nothing!)
- TDC VSR-10 style HOP-up - Adjusts via a rotary dial on the right side of the stock with tactile adjustment increments
- Bullpup configuration - Long Inner barrel, only 670mm overall length - Very space-efficient
- Compatible with VSR-10 magazines - Spares are common and always available
- Skeletonised trigger - Looks fantastic, blends well with the futuristic design language
- Rubberised butt plate - Plenty of traction in any weather conditions, great for use with body armour
- Two-position safety catch - On the right side, well within reach from a firing grip. F= Fire, S=Safe
- Interesting magazine catch design - The magazine IS the mag catch!
- Install the charging handle in one of 3 positions to adjust the muzzle energy
- Approximate FPS with 0.2g BBs: Position 1: 380 +/- 10% | Position 2: 420 +/- 10% | Position 3: 450 FPS +/- 10%
- Compatible with VSR-10 style HOP-up rubbers - Aftermarket options are plentiful
- Compatible with unbridged VSR-10 style inner barrels - Likewise!
- Aluminium and polycarbonate internals - Ultra strong, no need for upgrades
- Designed and manufactured in France - Exceptions are the inner barrel and HOP-up rubber
Package Includes
- Storm Airsoft PC1 Electro-Pneumatic Bullpup Sniper Rifle
- 55rnd VSR-10 Magazine
- User manual
Specification
General
 |
Snipers Rifle
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 420fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Experienced Player
|
 |
The PC1 requires a consistent bolt pull to provide maximum accuracy and consistency down range. We recommend racking the bolt quickly and positively, and avoiding slowly cocking the rifle for the best performance.
|
Weight and Dimension
 |
Approx. 1.4kg
|
|---|---|
 |
68cm
|
 |
68cm
|
Construction
 |
Black,
Tan ,
Olive Drab,
|
|---|---|
|
|
Black
|
 |
No
|
 |
Carbon Fibre outer barrel. 30% Fibreglass reinforced Polymer body. Steel bolt handle, cylinder and body screws.
|
|
|
Polymer
Aluminium
Steel
Carbon Fibre
|
 |
Aluminium
Steel
Polycarbonate
|
Weapon Specific
 |
Electro-Pneumatic
|
|---|---|
 |
None
|
 |
Long Gun, Snipers Rifle, PC1 Sniper Rifle,
|
 |
Long Gun Magazine, Snipers Rifle, VSR / Bar10,
|
 |
 Bolt Action
Fire
|
 |
Trigger Lock
|
 |
Ambidextrous
|
 |
Bullpup
|
 |
1:1
|
 |
0.32g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Unique
|
 |
External Rotary Dial on the right side of the stock, just above the magazine well.
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS , 20mm Railed Receiver, M-LOK Rail system,
|
 |
Fixed
|
|
|
1 Position
|
 |
None
|
 |
Stock , Loop ,
|
Barrel
|
Outer Barrel Length (in)
|
15'', 18'',
|
|---|---|
 |
Male
|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
6.05mm
|
 |
380mm, 460mm,
|
Magazine Specific
 |
Low Capacity , Sniper Rifle,
|
|---|---|
 |
Approx. 55 Rounds
|
 |
Speed Loader
|
 |
Top
|
Electric Gun Specific Information
Battery Specific
 |
 |
|---|
Compatible Battery
 |
Li-Po
|
|---|---|
 |
Stick
|
 |
7.4v
|
Product Testing Data
 |
450 FPS +/- 10%
|
|---|---|
|
|
0.2g ASG BLASTER
|
|
|
09/11/2023
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Tolerance: 5.95mm +/- 0.01mm
- Biodegradable BBs
- 0.25g Weight - 2200 or 6000rnd options
If you are looking for biodegradable BBs for use in both CQB skirmishes and out in the glorious woods, NUPROL have just the thing! The RZR 0.25g Precision BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are constructed from a biodegradable polymer, meaning they will be allowed on even the strictest Airsoft sites and no need to worry about cleaning up after shooting!
- White In Colour
- Heavyweight BBs
- Improve Range & Accuracy
The BBs that Airsoft snipers have been waiting for: the ultimate heavyweight, precicsion made 0.43g Airsoft BBs, designed to offer users enhanced range and accuracy.
- Special Putty
- Oils & Degreasers
- Cleaning Tools Included
A must have piece of kit for any Airsoft player or enthusiast. The kit comes with everything you need to keep your GBB and AEG weapons in top condition, giving you an edge over your opponents.
- 1KG Resealable Bag
- 5.95mm +/- 0.01mm
- Competition Grade BB
These 0.28g BB's created by G&G (Guay Guay), who create a range of high quality BB guns and related products, with these BBs being some of the highest quality in the sport.
- 12g Capacity
- Single CO2 Bulb
- Steel Construction
A 12g CO2 Bulb Capsule Single, sold individually these 12g bulbs can be used for both Airsoft and Air rifles.
- Check and dot pattern texture
- 150rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for an ultra-modern styled mid cap, this is the one you're after!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- 4x Fixed Zoom
- 4x32 Rifle Scope
- Scope Rings Included
A Scope designed for Airsoft Weapons designed to allow the user to place accurate shots at range, and allows you to follow the trajectory of BBs as they are fired.
- High Power Gas
- Metal Fill Nozzle
- Contains UPL+ Lubricant
Abbey Predator Ultra GAS is the perfect propellant for any gas weapon from pistols to high tech sniper rifles. It contains UPL+ lubricant which is designed to stay permanently mixed with the propellant.
- Weaker Than Ultra Gas
- Ideal Summer Gas
- 700ml Content
A very popular selling gas especially during summer and in countries that have a warm climate. This gas really is a low power gas. It has a high silicone content, so you will need to clean your GBB Airsoft weapon more frequently to ensure longevity.
Stocked and used by our Patrol Base workshop and other staff members for years, each can has 700ml of contents and can be used to reduce output power of a hot gas gun, or ensure smooth silky operation of a Polymer slided pistol.
- 14mm CCW or 14mm CW threads
- "Brrrrt" markings - 40mm Diameter version
- Foam filled for slight sound dampening
If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.
This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!
- 1kg bulk bag
- Choice of BB Weights
- High quality - Great value!
For those of you who have a heavy trigger finger, LMG users, or the thrifty bargain hunter, we finally have a "cheap" BB which we can approve of! The ASG Cursed BBs are a high quality polished BB with absolutely no surface imperfections, seam lines, or injection pin marks, and despite this level of quality you can spray and pray all day long at this bargain price!
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- White in Colour
- 1000 BBs Per Pot
- Improve Accuracy & Range
The BBs everyone has been waiting for! A White Airsoft Sniper 6mm BB pellet that also works!
- 30ml Content
- Great Lubricant
- Easy Drip Nozzle
Stocked and used by our Patrol Base workshop and other staff members for years. Easy to store and use with the lockable pop on lid you can store this in a rucksack or bag without over worrying the contents may spill out during transit or storage.
- 1kg Bag of BBs
- Approx. 3550 BBs
- Standard White 0.28g
Developed by Evolution Airsoft these 1Kg Bag of 0.28G BBs are great standard BBs for regular Skirmishers and Airsoft players who are looking to get great performance from their Airsoft gun. 0.28g BB are commonly used as a Regular to Advanced Player weight of BB, and are great for outdoor gameplay, allowing them to punch through bushes, grass, and more stable in wind. These BBs are perfect for use in Airsoft guns operating over 320fps, or for upgraded guns with an effective hop-up unit.
The BBs come in a 1kg Bag, with the bag containing approx. 3550 BBs, and is resealable to ensure that your BBs stay as fresh as possible, and prevents them from spilling once the bag has been opened.
- Green Gas
- 520ml Contents
- 90% Propane / 10% Butane
Green Gas designed for use on gas powered Airsoft pistols, Rifles and Shotguns. The gas comes in a lightweight aluminium can and has a heavy duty metal nozzle meaning it won't snap.
- Low Powered Gas
- Silicone Lubricants
- For Polymer Pistols
A bottle of Low Powered Gas designed by NUPROL as part of their Green Gas Range, designed to be used with Plastic Bodied Weapons and Small Submachine Guns which require lower powers to operate.
- Bottles or Bags
- 0.20g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.20g BBs which are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
If you are looking for a skirmish-oriented primary which gives you all you need to cut through the hoards, the Wildhog has your name on it! The G&G CM16 Wildhog is the G&G Combat Machine reinvented with the superb G&G G2 gearbox and a programmable ETU which allows for burst mode, all housed in G&Gs rock solid polymer receiver with an updated shape and design to give it a slick, modern style. If you seek something robust with above-average performance and some slick advanced features, the Wildhog is the one!
- 6.03mm Tightbore inner barrel
- High density polymer construction
- Spenca's featherweight AR-9 offering
If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.
The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.
Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!
- Integrated optical sight
- Front 20mm RIS rail
- Bullpup configuration
Bullpup rifles, you either love 'em or you hate 'em. But assuming you've found your way to this page, we're guessing you're on team rear mag. This variant features a shorter barrel so the compact nature of the AUG is augmented further, giving you a long hidden inner barrel with a vastly reduced footprint when held against your person.
With an integrated scope and front para 20mm rail with pistol grip included, this variety of AUG is great for both CQB and longer range outdoor skirmishing alike, giving you the best of both worlds. With a sturdy and compact design, bullpup fans, you may have just found your new favourite primary.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Tactical Appearance
- Alloy M-LOK Handguard
- Hi-tech Internal Enhancements
The Double Eagle M90 range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an inimitable exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture, so get your NODS on, it's about to get operator AF up in here.
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of Airsoft Pistols, featuring 'Racoon City Police' trademarks.
- Thread adaptor and rail
- Extended base plate
- Light enhancing sights
Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.
The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.
- Square Ironsights
- CO2 Compatible
- Textured Grip
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.
This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.
- Full metal construction
- Modern AK support weapon
- Includes steel folding bipod
If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!