Airsoft Under £50

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

This is a pack of twenty Glowsticks/Chemlights, that includes four of each colour, including Red, Orange, Yellow, Green and Blue.

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position.

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings.

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

A lightweight Chest Rig Plate Carrier designed to be of a minimal size to optimise mobility and reduce carry load weight for the operator making him more dynamic in the field of combat. 

So you have the old school WWII SMG, but you have no way to carry it? SRC to the rescue! Introducing the MP40/SR40 WWII Leather Sling from SRC, an authentically constructed and styled real leather sling intended for use with MP40 AEGs and the SRC SR40 AEG or GBB. The sling is attached by looping it through the front and rear sling slots on the MP40, and when installed provides adjustable length to provide an easy way to carry your MP40 on your back.

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

Viper are back with a dual tone softshell jack with their logo displayed loud and proud. Featuring 2 side pockets and 1 left-hand side pocket all fully zipped. The cuffs are Velcro clad for when you need to keep out the cold, as well as orange toggles on the inside for the assist.

The jacket is made from Nylon and elastane for that slight bit of stretch for when you need it. It features a high collar, which can be zipped up all the way to the top. Available in a variety of sizes.

The WoSporT Dummy PVS31 Night Vision Goggles are perfect for people who want the tactical style, without having to pay thousands of pounds for the real thing. These NVGs are a great addition to any cosplayer or military loadout. They are constructed from high-density polymer and include dummy wires and a dummy battery box, giving the full, authentic look.

There are also diodes in the lenses, which give them a green tint when they are folded out. This creates an interesting visual effect and helps further the realism that these dummy night vision goggles provide to your loadout. If you want to add an extra sense of authenticity to your Airsoft loadout or cosplay outfit, the WoSporT Dummy PVS31 Night Vision Goggles are a great addition!

The G&G Armament Knights Armament 3 Prong Flash Hider matches the design of real steel flash hiders. It is constructed from steel making it extremely durable and sure to withstand any skirmish. It mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. To attach it, simply twist it onto your rifle's outer barrel and then you're good to go! It features a very aggressive design that will make any platform ten times more aggressive.

This flash hider also has the added realism of being licensed by Knights Armaments, the real steel firearm company. Although there are no visible trademarks on the flash hider itself, it gives you peace of mind knowing that this muzzle device has been made to the standards of a real steel manufacturer.

If you want a super realistic flash hider for your Airsoft platform, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

This low profile HYBRID chest rig from 8Fields proved the end user with a multi-purpose, lightweight and versatile method of carrying their magazines.

This low profile HYBRID chest rig from 8Fields proved the end user with a multi-purpose, lightweight and versatile method of carrying their magazines.

This low profile HYBRID chest rig from 8Fields proved the end user with a multi-purpose, lightweight and versatile method of carrying their magazines.

This low profile HYBRID chest rig from 8Fields proved the end user with a multi-purpose, lightweight and versatile method of carrying their magazines.

This low profile HYBRID chest rig from 8Fields proved the end user with a multi-purpose, lightweight and versatile method of carrying their magazines.

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you are looking for an easy way to make your Airsoft platform exclusively a DMR or CQB beast, this is worth checking out! The Delta Armory Programmable ETU Processor Unit for V2 Gearbox; Semi Only replaces your conventional trigger assembly and offers semi-automatic fire only with adjustable pre-cocking, which can be programmed in using the fire controls of the AEG itself. 

This ETU should fit most M4/AR-15s which use a version 2 gearbox, but we only recommend this part for experienced techs and those in the know when it comes to Airsoft internal upgrades. The ETU is also pre-wired to a Deans/T-Plug battery connector in rear wired configuration and spade connectors for your motor, so you shouldn't need your soldering iron!

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

If you're in search of a simple rifle bag to transport your pride and joy, the Novritsch Sniper Rifle Gun Bag is ideal. This gun bag is designed for sniper rifle platforms and fits SSG10 A1-sized rifles in neatly, promising space for rifles of up to 115cm overall length. The depth is also generous, meaning you won't need to remove your scope or bipod to use this bag if your sniper rifle is of conventional shape. 

The Sniper Rifle Gun Bag also features a dual carry handle and shoulder strap, meaning you can free up your hands when needed by throwing your gun onto your back. Inside, we are equipped with removable and repositionable velcro retainers, allowing you to secure your rifle regardless of shape and use this Sniper Rifle optimised bag for shorter platforms when needed. The bag is secured with robust heavy-duty zips from SBS which can be padlocked together for greater security. 

If you hate lugging heavy and bulky cases around but want your primary to be transported in the lap of luxury, the Novritsch Sniper Rifle Gun Bag is the minimalist solution you need!

If you're in search of a simple rifle bag to transport your pride and joy, the Novritsch Sniper Rifle Gun Bag is ideal. This gun bag is designed for sniper rifle platforms and fits SSG10 A1-sized rifles in neatly, promising space for rifles of up to 115cm overall length. The depth is also generous, meaning you won't need to remove your scope or bipod to use this bag if your sniper rifle is of conventional shape. 

The Sniper Rifle Gun Bag also features a dual carry handle and shoulder strap, meaning you can free up your hands when needed by throwing your gun onto your back. Inside, we are equipped with removable and repositionable velcro retainers, allowing you to secure your rifle regardless of shape and use this Sniper Rifle optimised bag for shorter platforms when needed. The bag is secured with robust heavy-duty zips from SBS which can be padlocked together for greater security. 

If you hate lugging heavy and bulky cases around but want your primary to be transported in the lap of luxury, the Novritsch Sniper Rifle Gun Bag is the minimalist solution you need!

A highly durable heavy duty plastic hard case designed to protect your tactical equipment from damage during transport or storage. This case has a wide variety of safety features made to ensure that your most prizes possessions stay safe even during the toughest conditions.

The case is IP rated, and fully tested to give you the confidence you need to store your favourite bits of kit inside without worry. The case is waterproof, dust-proof, and shock proof, making it the perfect storage solution for anyone who wants to keep their valuables safe in a pinch.

The case is perfect for any kit you would use both on and off the Airsoft field, being the perfect size not only for pistol or attachment storage, but also for storing laptops and other electronics.

One magazine probably isn't going to be enough for a pistol that has you wanting to keep shooting. This heftily constructed M9A3 magazine holds 22 rounds and takes 12g CO2 bulbs, with a beautiful matt tan finish to match your pistol and also the real deal!

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns.