Best Beginner Airsoft Guns

This revolver is iconic! The Single Action Army, also known as the Colt Peacemaker, is a revolver that has been in production since 1873. That's over 150 years that this revolver has been in production for, and it is just as loved now as it was those many moons ago when it was the U.S Army's standard issue pistol.

The Tokyo Marui Airsoft version has a full polymer body with a metal trigger. This makes it lightweight and is perfect considering it is a springer revolver, meaning you need to cock the hammer with your thumb each time you want to shoot. It comes with shells that hold a BB each and can be loaded into the revolver's 6 chambers.

This is by no means an Airsoft pistol that will carry your next Airsoft game, but it looks incredible, is crafted by Tokyo Marui, and has that satisfying revolver feel with individual shells. It's an absolute treat!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode.

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again. The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed. This AEG is the XS version of the Ghost EMR, optimised for CQB and aggressive playstyles with the AX stock installed for a stubby, aggressive aesthetic!

A tough constructed SVD platform replica which has had a thorough course of Westernisation in the form of a Sliding Crane Stock, M-LOK Handguard and 20mm Railed Receiver, as well as a standard threaded Outer Barrel w/ Bird Cage Flash Hider.

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

This rifle is a great budget option, partly resembling the new British military rifle, the L403A1/KS-1. It has a polymer handguard and receiver, keeping the weight low. This is perfect if you are new to Airsoft or prefer a more agile style of gameplay, and a hefty, realistic Airsoft platform will just weigh you down.

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-F03 FLEX™ Gen.2 M4/AR-15 Compact AEG; X-ASR MOSFET is one to watch!

If you're after a full metal AK with Russian vibes, the Evolution E-74 AKS-74 Paratrooper AEG is a solid choice. Boasting full metal construction with plenty of stamped steel in the mix, the E-74 is inspired by the real steel AKS-74, the folding stock variant of the Cold War era AK-74 issued to airborne troops and mechanised infantry.

Inside, the E-74 is equipped with basic but reliable internals, based around a TM-spec version 3 gearbox with 18:1 ratio steel gears running on 6mm ball bearing bushings. The piston is polymer with a full steel tooth rack, and the spring guide is a quick-change example, making power tuning a breeze. Also inside is a 6.01mm tightbore inner barrel paired with an alloy slider adjustable HOP-up unit, providing superb accuracy potential with high-quality BBs. Those looking for a simple yet effective full metal AK, look no further than the Evolution E-74 AKS-74 Paratrooper AEG!

The Speedsoft style doesn't always need to be bright colours and HPA tanks. Sometimes, it looks like a gun straight out of a futuristic COD game! The ARCTURUS X C.A.T. Versatile-10S AK AEG FE™ has an extremely unique design and equally unique ARCTURUS Centaur V2 gearbox. The enhanced internals and FE™ programmable MOSFET/ETU system make for some impressive shooting, too.

This rifle is clearly based on the Russian AK rifle; however, it is a far cry from the original Kalashnikov platform. With its extremely skeletonised design and modern style, the only tell that it's an AK is its curved magazine! The skeletonised M-LOK /20mm Picatinny hybrid handguard allows for plenty of accessories while being super fast to steer between targets thanks to its ultra-low weight.

Plus, its snag-reduced receiver design features ambidextrous controls to ensure your weapon handling is super slick, whether you're left or right-handed. The C.A.T. Versatile series from ARCTURUS offers fully modular platforms in which you can change the handguard, stock and even the magazine well! The versatile part of the name really makes sense...

If you're just starting your Airsoft journey and looking to get involved without spending too much, you're in safe hands with the CYMA CM.513 M4 SD RIS AEG! A proven platform made even better in its latest iteration, the CM.513 is part of CYMA's "Sport" line, rocking a lightweight and handy build with no performance compromises, ideal for those with less physical strength or those who like to conserve energy!

The alloy version 2 gearbox inside the CM.513 is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.513 is inspired by real-world integrally suppressed M4/AR-15 rifles designed for stealth in a close-quarters environment. The handguard is a 20mm Picatinny quad-railed example, ready for vertical or angled grips, lasers or tactical flashlights. The receiver is also railed and ready for a red dot sight or scope but comes with flip-up iron sights to get you started. If you've been searching for an affordable, reliable and well-equipped Airsoft primary for your first foray into the sport, the CYMA CM.513 M4 SD RIS AEG is one of the best options out there!

If you're getting into Airsoft on a tight budget and you're an AK fan, the CYMA CM.520 AK-47 Tactical AEG w/ Solid Stock is the perfect starter platform. Made predominantly from high-density polymer with an alloy outer barrel, this AK is part of CYMA's new "Sport" range; lightweight and handy with no performance compromises, ideal for those with less physical strength or those who like to fight easy!

Inside, the CM.520 has a respectable feature set including some important pre-upgraded parts, keeping it competitive on the field despite its entry-level price point. The alloy version 3 gearbox is equipped with steel 18:1 gears running on 7mm steel bushings, a reinforced nylon piston, piston head and cylinder head and a type 0 cylinder, all of which are compatible with aftermarket upgrade parts. The inner barrel is a 6.03mm tightbore example, giving you improved accuracy and higher FPS from the same strength spring, a thoughtful pre-upgrade for long-range effectiveness.

On the outside, the CM.520 is rocking a 20mm Picatinny quad-railed handguard, offering a 20mm rail on top for a red dot sight, another on the bottom for a vertical grip and two short side rails, ideally suited to a tactical flashlight or aiming laser. Just like a real AK, the controls are super simple and easy to master and when paired with its lightweight and agile build, this makes the CM.520 AK-47 Tactical AEG w/ Solid Stock a force to contend with either outdoors or in CQB!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

A non-blowback and gas-powered pistol which you would be forgiven for thinking is of another brand. It is built to a really impressive quality with high-density Polymers that feel great in the hand, with the exact same mind-blowing performance as the original design.

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the Airsoft GLOCK 17 Gen5. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

The UMAEX Elite Force H8R CO2 Revolver is an aggressive and mean looking piece of kit, featuring a modernised .357 style revolver platform and a compensated front end and equipped with 20mm Picatinny rails ready for all your accessories. You better believe the UMAREX H8R means business!

If you're just starting your Airsoft adventure and need a cheap starter replica which can do it all, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ideal. This M4/AR-15 platform AEG is constructed almost entirely from high-density polymer with an alloy outer barrel and trim parts, keeping the build lightweight and agile, not to mention cost-effective. While it weighs practically nothing (only 1.7kg!), the CM.506 doesn't feel flimsy thanks to its use of high-density ABS polymer. Inside we are treated to surprisingly well-equipped internals, offering respectable performance in both outdoor and indoor skirmishes.

The alloy version 2 gearbox the CM.506 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.506 is absolutely mission-ready, equipped with a 20mm Picatinny quad rail handguard and 20mm railed receiver, ready for any 20mm Picatinny accessories you need, from red dot sights and scopes to vertical foregrips, laser aiming modules and tactical flashlights. The alloy outer barrel is rocking 14mm CCW male threads, meaning you can add a tracer unit to make your BBs glow or a suppressor for sneaky styling. If you're ready to get into the sport with one of Airsoft's most popular platforms, the CYMA CM.506 M4A1 RIS CQB AEG Rifle is ready for you!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

An ideal extremely low budget skirmish gun, or a good excuse to have a laugh in the back yard, The AGM MP003B is probably the cheapest Airsoft replica you could take to a skirmish and have any hope of getting hits with. Featuring decent FPS out of the box,  1x magazine in the package and an adjustable hop, the MP003B is ready when you are!

An ideal extremely low budget skirmish gun, or a good excuse to have a laugh in the back yard, The AGM MP003B is probably the cheapest Airsoft replica you could take to a skirmish and have any hope of getting hits with. Featuring decent FPS out of the box,  1x magazine in the package and an adjustable hop, the MP003B is ready when you are!

A Gas Blowback Pistol from NUPROL's RAVEN series which features a custom Hydro-Dipped skin, integrated Red Dot Sight, Low-Light Ironsights and a Tactical Rail Slot to offer the ultimate out-of-the-box tactical sidearm for Airsoft skirmishing.

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

When you think of shotguns, something like this is always the first image to come to mind. An iconic silhouette with a decorated history, being seen all around the world since its production first began back in 1951. This popularity has carried over to the world of Airsoft and has become a CQB skirmisher's best friend. Nothing quite beats the rush of running around close quarters and vanquishing foes with spreads of BBs as soon as they turn the corner. The multi-BB pump action shots mean even if you can't aim, there's still a chance that the shotgun spread will result in a hit!

This shotgun may look like a previous product, but that's because it's actually the Gen. 2 version of the Golden Eagle Type 870 M8872. This new version looks almost identical except the gas port at the rear of the stock has changed due to issues with a leaky detachable gas tank and unreliable o-rings. The version 2 shotgun has scrapped the removable gas tank and instead installed a fixed gas tank within the stock that can be filled up through the rubber butt plate.

Treat yourself to some CQB satisfaction with the Golden Eagle Type 870 M8872 Railed Gas Shotgun V2 and enjoy the satisfaction of pump action mixed with a 3-shot spread

A Spring-Powered Airsoft Sniper Rifle which is based on the L96 platform, outputs a healthy 415FPS and comes included with a magazine and Speedloader.

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!