All External Airsoft Parts & Attachments

If your CM.041 SMG-5 AEG has a worn-out muzzle device perhaps it is time to switch it out for a nice new one. This replacement original part from CYMA should do the trick! The Threaded Tri-Lug Muzzle Device is designed for the CM.041 SMG-5 AEG series and is constructed from aluminium. The device mounts to the front sight assembly of the CM.041 series and provides tri-lug mounting apparatus and 14mm CCW male threads at the tip, protected with a knurled thread protector. Freshen up your old SMG-5 with a new muzzle device!

If you want to add some extra accessories to your AK but you approve of neither top cover mounted optics nor the Russian side rail, this railed gas tube should do the trick! Based on the real steel UltiMAK design, the CYMA 20mm Picatinny Railed Gas Tube for AK47/74 AEG replaces the gas tube and upper handguard of your AK AEG with an aluminium enhanced gas tube with a 20mm Picatinny rail milled into its upper surface.

This style of rail has found its way onto many AKs used in the hands of both PMCs operating in the middle east and civilian tactical shooters in the US and is a great way to mount forward mounted red dot sights and tactical flashlights without doing anything weird to the receiver itself. This part is designed for the CM.04x series of AK AEGs from CYMA but will not fit AKS-74U AEGs due to the length.

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

If you're looking for a spiffy new flash hider for your SMG-5, you've come to the right page!

Constructed from sturdy alloy, this flash hider sports a birdcage style design, quickly and easily attached / detached using the handy tri-lug attachment system. This flash hider is designed for use with CYMA CM.041 models, however it should fit other brands of SMG-5.

A spare or replacement Butt Pad/Plate for CYMA branded AK replicas. This is ideally useful for Rear-Wired models where the Battery is stored in the Stock and needs to stay locked in place. Whether you need a spare yet or not, this is an essential bit of kit for any AK owner with a Solid Stock.

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

A Krinkov style Flash Hider/Amplifier for Airsoft Guns with 14mm CCW Threads. It is designed for an AK Platform Rifle, but will attach and fit to anything with a 14mm CCW Thread that you think looks good.

The Flash Hider doubles up as an Amplifier, making your Airsoft Gun sound louder when installed. It is also compatible with 24mm CW AKS-74U threads by removing the inner sleeve/adapter.

Lost a handguard pin from your sneaky SMG-5? That's a shame, but fortunately, we have the solution! The CYMA Handguard locking pin is designed for the CM.041 SD6 AEG series, but may also fit other SMG-5 SD6 AEGs, though we are unable to confirm which ones. The pin is constructed from alloy and is packaged as a single pin, so if you have lost both pins make sure you order two!

If you're after ergonomic improvements for your AK, look no further than the CYMA Enhanced Pistol Grip for AK AEGs! This pistol grip is constructed from high density polymer with an ergonomic design and textured surfaces; a massive improvement over most stock AK grips. 

This grip is compatible with VFC spec AK AEGs, meaning it will fit CYMA CM.04x, CM.05x, Double Bell and Arcturus AK AEGs but won't fit AKs with the original TM AK-47 AEG build style (CYMA CM.028, CM.522, JG AK AEGs etc.). Whether you want to add a modern touch to your AK or you can't stand the original AK grip, this Enhanced Pistol Grip for AK AEGs will give your AK a new lease of life!

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

An Alloy constructed Muzzle Brake for AK model replicas, which comes supplied with an adaptor to install it on any 14mm CCW thread.

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

If you have had a mishap with your CYMA CM.028 and cracked the battery tray you aren't the first and you likely won't be the last! The CYMA Charging Handle Base/Battery Tray for CM.028 AK47 AEG is designed to replace the battery tray inside TM pattern AK rifles in the event that it gets broken or damaged. Nothing ruins your AK like the charging handle sliding around loosely in the receiver so if you have a CM.028 that is worse for wear this affordable replacement part could be the key to fixing it up!

An Airsoft replica of the classic M16 style fixed solid stock, designed for use on Airsoft 6mm BB replica M4s, M15s and M16 AEGs. Just like the real stock this replica is based on, the CYMA stock is constructed from dense polymer to create a lightweight and rugged firing platform.

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!