New Airsoft Guns & Products

If you like to travel light to a skirmish but appreciate full-fat realism, the EMG KelTec SUB2000 Folding Gas Blowback PCC is one to watch. A full-metal build licensed by KelTec via EMG, the real SUB2000 was designed as a folding, backpack Pistol Calibre Carbine (PCC), intended to be easily stowed while boasting a 16.1-inch carbine-length barrel for solid long-range performance. 

The Airsoft SUB2000 is based on the KWA GBB system, feeding from KWA ATP-spec magazines, with an adjustable HOP-up unit to lift heavy BBs with ease. We've had great luck using 0.28g and 0.32g BBs with our pre-production prototype, and we were able to get 3 BB fills from a single gas fill using the included 49-round extended mag, pointing to a very gas-efficient internal system.

The party trick of the EMG SUB2000 is its full auto fire mode, something not present on the original for legal reasons. This effectively makes the SUB2000 a true select-fire SMG, giving you the fun mode as a side to the sensible semi-auto mode of the real steel. Whether you like to fit all your Airsoft kit into a single backpack, you travel light on a motorbike or public transport, or you love an innovative real steel platform in Airsoft form, the EMG KelTec SUB2000 Folding Gas Blowback PCC will definitely please!

If your M4 needs a revamp, a drop-in gearbox replacement is the easy way! The Delta Armory Complete Version 2 Gearbox for M4/AR-15 AEG is compatible with almost every M4/AR-15 AEG on the market and is well-equipped with reinforced parts from SHS to enhance reliability and performance.

This is the same gearbox used in the Delta Armory CHARLIE™ line AEGs, boasting a quick-change spring guide, 18:1 steel gears running on 8mm bushings, an SHS piston with a full steel tooth rack, an SHS reinforced tappet plate and a reinforced gearbox shell with radiused cylinder window corners.

The pre-installed spring will provide around 380 FPS on 0.20g BBs when installed, so if you plan to use this gearbox for anything other than a semi-auto-locked DMR build, you will need an M100 or M105 replacement spring to keep it within site limits. Thankfully, the quick-change spring system makes spring swaps a breeze! Whether you are breathing new life into an old M4 AEG or you are building an AEG from scratch, this complete gearbox will save you loads of time and messing around!

If you're gearing up for an HPA setup, this is essential! The Airtac Superflex HPA Airline measures 40 inches / 101.6cm in overall length, fitted with a US-type/Foster 22-2 connector for wide compatibility. This airline is designed for flexibility and agility, keeping length to an effective 40 inches for the perfect balance between mobility and snag reduction.

Its large internal bore ensures ample airflow for high-rate-of-fire setups while reducing the chances of airflow being restricted should the airline be compressed. If you're about to hit the field with your HPA setup, don't forget the Airtac Superflex HPA Airline!

If you're kitting yourself out for HPA on a tight budget, the NUPROL Aluminium 48ci 3000PSI HPA Tank is a fine choice! Boasting a 48ci/ 0.8L capacity and capable of being pressurised to up to 3000PSI, this set includes an integral bottle regulator, but you will also need an airline and line regulator to complete the setup.

These tanks are marked with a manufacture date of 2026/0, UK Rho marks, and EU PI 0035 certification, making them compliant with both UK and European regulations. If you're ready for HPA, this NUPROL Aluminium 48ci 3000PSI HPA Tank is a fantastic entry point!

Whether you're fresh to Airsoft or a veteran looking for a lightweight, "easy mode" primary, the King Arms Colt® x Daniel Defense® MK18 Sportline AEG is a fine choice. Made almost entirely from rock-solid high-density polymer, this MK18 AEG boasts proven internals with wide compatibility and an incredibly light, agile build, tipping the scales at a mere 1.7KG, ideal for those with less physical strength or those who like to fight easy!

On the outside, this budget-friendly build boasts licensed trademarks across the design, from both Daniel Defence® and Colt®, thanks to official licensing from EMG. These markings perfectly match US military-issued MK18 MOD.1 rifles, with a Colt-marked lower receiver and a DD-marked rail system. Airsofters love licensed trades, but they're usually only found on AEGs at twice this price!

Inside, this AEG is based around the proven Version 2 gearbox design, with an alloy shell, 18:1 ratio steel gears and a quick-change spring guide for easy maintenance. An in-line MOSFET cranks up trigger response for rapid double taps, and a tightbore inner barrel enhances accuracy with high-quality BBs. If you're new to the game, seeking the iconic MK18 in beginner-friendly flavour, you've found it with the King Arms Colt® x Daniel Defense® MK18 Sportline AEG!

Whether you're fresh to Airsoft or a veteran looking for a lightweight, "easy mode" primary, the King Arms Colt® x Daniel Defense® MK18 Sportline AEG is a fine choice. Made almost entirely from rock-solid high-density polymer, this MK18 AEG boasts proven internals with wide compatibility and an incredibly light, agile build, tipping the scales at a mere 1.7KG, ideal for those with less physical strength or those who like to fight easy!

On the outside, this budget-friendly build boasts licensed trademarks across the design, from both Daniel Defence® and Colt®, thanks to official licensing from EMG. These markings perfectly match US military-issued MK18 MOD.1 rifles, with a Colt-marked lower receiver and a DD-marked rail system. Airsofters love licensed trades, but they're usually only found on AEGs at twice this price!

Inside, this AEG is based around the proven Version 2 gearbox design, with an alloy shell, 18:1 ratio steel gears and a quick-change spring guide for easy maintenance. An in-line MOSFET cranks up trigger response for rapid double taps, and a tightbore inner barrel enhances accuracy with high-quality BBs. If you're new to the game, seeking the iconic MK18 in beginner-friendly flavour, you've found it with the King Arms Colt® x Daniel Defense® MK18 Sportline AEG!

Whether you're fresh to Airsoft or a veteran looking for a lightweight, "easy mode" primary, the King Arms Colt® x Daniel Defense® MK18 Sportline AEG is a fine choice. Made almost entirely from rock-solid high-density polymer, this MK18 AEG boasts proven internals with wide compatibility and an incredibly light, agile build, tipping the scales at a mere 1.7KG, ideal for those with less physical strength or those who like to fight easy!

On the outside, this budget-friendly build boasts licensed trademarks across the design, from both Daniel Defence® and Colt®, thanks to official licensing from EMG. These markings perfectly match US military-issued MK18 MOD.1 rifles, with a Colt-marked lower receiver and a DD-marked rail system. Airsofters love licensed trades, but they're usually only found on AEGs at twice this price!

Inside, this AEG is based around the proven Version 2 gearbox design, with an alloy shell, 18:1 ratio steel gears and a quick-change spring guide for easy maintenance. An in-line MOSFET cranks up trigger response for rapid double taps, and a tightbore inner barrel enhances accuracy with high-quality BBs. If you're new to the game, seeking the iconic MK18 in beginner-friendly flavour, you've found it with the King Arms Colt® x Daniel Defense® MK18 Sportline AEG!

Get your hitman on with the EMG Taran Tactical Innovations JW4 Pit Viper! This iconic pistol has been produced in collaboration with EMG, Armorer Works (OEM) and Taran Tactical Innovations.

It is the star of the show in John Wick: Chapter 4 and is kitted out exactly how it is in the movie, with a built-in compensator, light-enhancing iron sights and a flared magazine well for fast target acquisition and speedy reloads!

If you like full metal construction, Hi-capa GBB magazine compatibility and enhanced controls, you would be hard-pressed to find a more appropriate Hi-capa than this!

If you need an optic on your SMG-5 or G3 setup, this will do the trick! The Tokyo Marui Low 20mm Picatinny Rail Mount for SMG-5/G3 is made from alloy, providing a 20mm Picatinny rail on the top, ready for your choice of red dot sight or scope.

This mount affixes to the HK claw lugs present on SMG-5, G3, HK33/53 and MC51 receivers and should fit most options on the market, though ideally this is paired with a Tokyo Marui-branded platform. If you want a red dot sight or scope on your SMG-5 or G3, add this, and you'll be set!

If your Deagle simply isn't big enough, you need this conversion kit! The Armorer Works 10" Hand Cannon Kit for Desert Eagle, is compatible with Armorer Works and WE Desert Eagles (some are branded Cyber Gun), and gives you a whopping 10" barrel.

Along with an extended barrel, you get plenty more rail space for accessories and a 14mm CCW threaded tip. Also included in this conversion kit are a Racoon City-styled pistol grip, a rear iron sight and an extended safety lever.

Beef up the already beefy Deagle with the Armorer Works 10" Hand Cannon Kit for Desert Eagle and make it look like the iconic sidearm from "Resident Evil 2"!

This conversion kit will require you to disassemble your Desert Eagle to install it. Make sure you know what you are doing before attempting this!

If you need a compact battery with short wiring, the Delta Armory 11.1V 1100mAh 20C LiPo Battery (Deans) has you covered! Measuring approximately 1.4cm x 1.9cm x 10.01cm with an ultra-short 2cm wire, this LiPo battery is perfect for cramped battery compartments where excessively long wiring makes all the difference.

This battery is pre-wired to a Deans/T-Plug connector and a balance connector. As with all LiPo batteries, it must be charged using a LiPo balance charger, with the balance connector (small white connector) connected to the charger. We also recommend using a Battery Safe Charging Bag and never leaving a battery unattended while charging.

If you enjoy shooting 36 BBs per second with your Novritsch SSR9 DSG and find that a 120rnd capacity simply isn't enough, you need to check this out! The Novritsch 950rnd Drum Magazine V2 is designed for the SSR9 by Novritsch, but will also fit the Classic Army X9 Submachine gun AEG.

The magazine holds a whopping 950 BBs, granting you an almost 8x increase in the number of BBs that you can shoot before it's time to reload. It is powered by 2x 14500 3.7V rechargeable Li-Ion batteries, which are installed at the front of the magazine by twisting the panel counterclockwise. BBs are loaded through the fill window on the rear of the magazine. With this done, press the button on the rear of the mag dead centre for a few seconds, and the mag will wind up, ready for you to let rip!

The mag is made predominantly from high-density polymer to avoid compromising your in-game agility and making your SMG unwieldy. If you know how quickly an SSR9 DSG dumps a mid-cap and you don't want to spend more time reloading than shooting, the Novritsch 950rnd Drum Magazine V2 for Novritsch SSR9 AEGs is what you need!

Whether you're an aggressive fast mover or you're a dab hand with a pencil, the EMG X TTI MPX-K JW3 Sportline AEG should be in your sights! A detailed replica of the screen-used Taran Tactical MPX JW3 Custom PCC, complete with official licensing, this build makes use of a mix of aluminium and high-density polymer parts, keeping the cost down, strength high and giving you your best chance of sweeping between targets at John Wick speed!

With licensing from both Taran Tactical Innovations and Sig Sauer, the JW3 MPX-K is absolutely bristling with trademarks, featuring the iconic white TTI logo stamp on its flared magwell, stock adapter and mag baseplate, with recessed Sig Sauer trademarks on the receiver to perfectly match the real deal.

Inside, we have an alloy version 2 gearbox with TM-compatible parts, a quick-change spring system and a M4/AR-15-compatible rotary HOP-up unit; a solid start with plenty of aftermarket upgrade options available. Whether you're rocking your finest evening wear to a game or you have a John Wick gun wall which needs a centrepiece, the EMG X TTI MPX-K JW3 Sportline AEG is ideal!

If you are in the process of adding upgrades to your Krytac AEG, we assume you are more of an advanced user; as such, you will be interested in these! 

The Spur Gear Spacers from Laylax are specifically designed to be used with the superb Krytac gearset, replacing the self-shimming spring spacers surrounding the spur gear with a more precise, stable and robust spacer solution. 

The original self-shimming spring spacers are intended to make the gearbox easier to work on for inexperienced players with little gearbox and shimming experience. 

If you know what you are doing when tuning a gearbox, the original spring spacers will only hold you back; the Laylax spacers will give your gearbox a smoother sound and improve its mechanical efficiency!

If you are preparing yourself to rock the fantastic new CANiK SFx RIVAL GBB pistol from Cyber Gun, you will find these very useful! The 22rnd Green Gas Magazine for the CANiK SFx RIVAL Series GBB Pistol is constructed from alloy with polymer feed lips, a steel feed spring and brass valves with rubber O-rings.

The magazine holds approximately 22 BBs and can be loaded using a speed loader or by hand, either through the feed lips or by pulling the magazine follower down and loading through the front. The gas fill valve is located on the base plate of the magazine, ready for you to fill it with green gas.

If you have a CANiK SFx RIVAL, stock up on some spare mags and take it onto the battlefield and skirmish in style!

If you're looking for the premium look in an utterly unique sidearm build, the EMG R620 STACCATO X TTI JW3 Combat Master; Green Gas Version will do the trick! An exciting hybrid of a TTI-licensed JW3 slide and barrel with a STACCATO-style frame, this perfect pairing of high-end Hi-Capas boasts a CNC-machined slide and frame, steel hammer group parts and a redesigned cold-resistant nozzle, enhancing rapid-fire performance and durability.

Naturally, the STACCATO X TTI JW3 is full metal, and its super fine CNC machining really makes the details pop, with a varied finish on the slide serrations which matches the real thing perfectly. The combat-ready features of the original JW3 build remain, including its light-enhancing iron sights, flared magazine well, trigger guard undercuts, extended mag catch and stipple-textured grip. Just like the original STACCATO series and JW3, this beast handles like an absolute dream!

A positively gorgeous build with robust steel parts to keep it healthy for a lifetime, you can't go wrong with this interesting hybrid, whether you put performance first or build quality. If you've been struggling to choose between a STACCATO build and the iconic JW3 Combat Master, the EMG R620 STACCATO X TTI JW3 Combat Master; Green Gas Version makes that decision far easier!

If you're looking to give your M4 AEG a cheap style-up, the Delta Armory Grand Power Polymer Receiver for M4/AR-15 AEGs is the key! Made from high-density polymer, this affordable replacement receiver boasts licensed Grand Power firearms markings on the left side of the magwell, adding a realistic touch to your primary without breaking the bank. The set includes a fire selector switch, dust cover, dust cover lock, dust cover spring, front body pin and its locking screw, all pre-installed. 

If your build is based on a Delta Armory M4 platform, you'll have an easy time, as it is designed to be a drop-in fit for any CHARLIE™, BRAVO™ or ALPHA™ M4 AEG, and all of the trim parts can be swapped over with ease. Compatibility-wise, this should fit most M4 AEGs on the market, though modification may be required for certain brands.

If you're looking to give your M4 AEG a cheap style-up, the Delta Armory Grand Power Polymer Receiver for M4/AR-15 AEGs is the key! Made from high-density polymer, this affordable replacement receiver boasts licensed Grand Power firearms markings on the left side of the magwell, adding a realistic touch to your primary without breaking the bank. The set includes a fire selector switch, dust cover, dust cover lock, dust cover spring, front body pin and its locking screw, all pre-installed. 

If your build is based on a Delta Armory M4 platform, you'll have an easy time, as it is designed to be a drop-in fit for any CHARLIE™, BRAVO™ or ALPHA™ M4 AEG, and all of the trim parts can be swapped over with ease. Compatibility-wise, this should fit most M4 AEGs on the market, though modification may be required for certain brands.

If you're a fan of the John Wick movies, you need to own his pistol! The EMG TTI x STI JW3 Combat Master has the iconic upper design of the Taran Tactical Innovations pistol used in the movie and combines it with an STI pistol frame.

This JW3 is full metal, with CNC machining that really makes the details pop, with a varied finish on the slide serrations to match the real pistol perfectly. The expected JW3 complement of enhanced externals is still present, including its light-enhancing iron sights, flared magazine well, trigger guard undercuts, extended mag catch and stipple-textured grip.

Whether you're into licensed John Wick replicas or you love a stylish sidearm, the EMG TTI x STI JW3 Combat Master is a fantastic choice to fill the holster!

If you love unique builds bristling with licensed trademarks, the EMG R620 STACCATO X TTI JW3 Combat Master; CO2 Version should raise an eyebrow! An exciting hybrid of a TTI-licensed JW3 slide and barrel with a STACCATO-style frame, this perfect pairing of high-end Hi-Capas boasts a CNC-machined slide and frame, steel hammer group parts and a redesigned cold-resistant nozzle, enhancing rapidfire performance and durability.

Naturally, the STACCATO X TTI JW3 is full metal, and its super fine CNC machining really makes the details pop, with a varied finish on the slide serrations which matches the real thing perfectly. The combat-ready features of the original JW3 build remain, including its light-enhancing iron sights, flared magazine well, trigger guard undercuts, extended mag catch and stipple-textured grip. Just like the original STACCATO series and JW3, this beast handles like an absolute dream!

This is the CO2 version, boasting even stronger recoil than the green gas versions with superb cold-weather performance, which will keep it kicking long after green gas pistols have to hibernate. If you're a fan of both TTI and STACCATO, this should be your dream sidearm!

If you're looking for a CQB primary which will have the enemy team on the run, the G&G Armament ESG B-10 2.0 Compact Gas Shotgun will do the trick! The spiritual successor to the ill-fated FLAK-12 design, the ESG B10 is a semi-automatic gas-powered shotgun offering the choice between a punishing 5 BBs per trigger pull and a positively evil 10 BBs!

The ESG-B10 2.0 is constructed with a CNC Aluminium upper receiver and a superb quality high-density polymer lower, as G&G is known for, and takes standard M4/AR-15 AEG magazines, meaning spares are always available. In its new ultra-compact form, the ESG B10 is even more intimidating in CQB; lighter up front and faster to point, a true menace!

If you play CQB and need something to take on those drum-mag rocking HPA tri-shot speed-softers, the G&G ESG-B10 will give them a run for their money!

If you've got one of TM's super cool Gindan pistols in your stash, the 70rnd Speed Loader for Gindan Pistols from Tokyo Marui will help you load up! Designed specifically for Tokyo Marui's Gindan Semi-automatic Spring Pistol series, this loader holds 70 BBs approximately and can be filled through the front with the front cover plate slid down.

This loader works similarly to standard speed loaders, requiring you first to index your magazine with the loading port on the bottom, then push the thumb plunger until it becomes firm. It won't work with GBB or AEG magazines, so if you're loading the usual stuff, grab a standard loader. Whether you run your Gindan in-game or for backyard plinking, this loader makes reloading easy!

If you're after a HOP-up bucking that won't wear out, the Novritsch Immortal AEG HOP-Up Rubber for SSR90 / SSR63 / SSR77 is as close as you'll get! Designed to be paired with a flat HOP-up nub, this flat HOP-style bucking features no contact patch or anti-rotation nub, meaning if it wears out, you can simply rotate it slightly to use a fresh piece of rubber and get back in action without buying a new bucking. While it isn't literally immortal, it will definitely outlast other buckings!

Compatibility-wise, this bucking is a standard AEG-spec example and should fit practically any AEG on the market which uses the standard TM AEG bucking design. In terms of hardness, this is a 60-degree bucking, ideal for 350 FPS setups. If you're looking for a flat HOP-up bucking with an impressive lifespan, you won't find one better than the Novritsch Immortal AEG HOP-Up Rubber for SSR90 / SSR63 / SSR77!

If you need more firepower for your WE/Armorer Works Desert Eagle GBB, the 350rnd Drum Magazine for Desert Eagle GBB Pistol from Armorer Works is the right tool for the job. Boasting a whopping capacity of 350 BBs, this drum mag is loaded through the fill window on the left side of the mag body. Simply slide the door open and pour your BBs in, just like an AEG high-cap.

The winding wheel is on the front, easily accessed when wearing gloves and very fast to wind; a significant step up from comparable winding wheels and "flash mag" style setups, which can be a hassle to use under pressure. Once your BBs are loaded, wind the wheel until the noise changes, and you're ready to give 'em hell!

The fill valve is located on the baseplate, requiring the mag to be inverted to fill with gas. Boasting a gas reservoir just as massive as its BB capacity, this drum mag will handle rapid-fire far more effectively than standard or even extended mags, ideal for those who run their pistol as a primary.

Compatibility-wise, this mag is only for Desert Eagle GBB pistols made by Armorer Works or WE, and won't fit Desert Eagle replicas made by KWC. If you're unsure about compatibility, contact us for assistance. With 350 BBs on tap with plenty of gas to get them on target, the Armorer Works 350rnd Drum Magazine for Desert Eagle GBB Pistol is the ideal companion to a Desert Eagle-oriented primary pistol setup!

If you're scanning the horizon for high-end full face protection which is NOT the Dye i5, get eyes on the Empire EVS Warpaint Full Face Airsoft Mask; Thermal Ninja/Clear Lens! An aggressively styled rival to the legendary i5, the EVS boasts a dual-pane anti-fog lens, a rigid polymer shell with a rubber over mould, lightweight foam with mesh inserts for cooling surrounding the ears and a stylish colourway which won't give you away in-game, known as "Warpaint".

This, the "Warpaint" version, is finished with a grass-style green camouflage scheme, making it a fantastic choice for concealment in grassy woodland environments. If you like the shape of the EVS but prefer something a bit louder and prouder when it comes to colour schemes, check out the Geo Grunge version here!

With a tinted dual lens pre-installed and a clear dual lens in the box, you're covered whether the sun is out at the woodland site or you're sneaking through a dark CQB site. The dual lens configuration guarantees impressive anti-fog performance in all weather conditions, and the ability to switch lenses means you'll always be ready for changing lighting conditions. If you need high-quality, Airsoft-optimised full face protection, you're in good hands with the Empire EVS Warpaint Full Face Airsoft Mask; Thermal Ninja/Clear Lens!

If you're a sniper seeking the most realistic experience, the King Arms MDT LSS M700 Tactical Gas Sniper Rifle will do the trick! A hefty, full metal build with an aluminium chassis and AR-15 furniture, this is as realistic as Airsoft sniper rifle builds get, equipped with Tanaka-based internals with the versatile PCS adjustable FPS bolt.

The PCS bolt allows FPS to be tuned, from 200 FPS using standard green gas and 0.20g BBs, up to 410 FPS. This allows you to tune FPS to suit your local site's limits, taking full advantage of the higher FPS limit for bolt-action sniper rifles. One edge this Tanaka clone platform has over the Japanese-made original is its GBB/VSR-style HOP-up bucking design, making HOP-up upgrades more accessible.

In terms of looks and ergonomics, the LSS M700 is at the cutting edge, equipped with a licensed replica of the CAA RBS stock with an adjustable cheek riser and an M16A2 pistol grip, which is compatible with GBBR and real steel AR grips. The handguard features a negative space attachment system to save weight and includes a 20mm Picatinny rail adapter, ideal for a bipod. If you're ready for a sniper rifle at the peak of realism and modern handling, the King Arms MDT LSS M700 Tactical Gas Sniper Rifle is ready for you!

If you're a sniper seeking the most realistic experience, the King Arms MDT LSS M700 Tactical Gas Sniper Rifle will do the trick! A hefty, full metal build with an aluminium chassis and AR-15 furniture, this is as realistic as Airsoft sniper rifle builds get, equipped with Tanaka-based internals with the versatile PCS adjustable FPS bolt.

The PCS bolt allows FPS to be tuned, from 200 FPS using standard green gas and 0.20g BBs, up to 410 FPS. This allows you to tune FPS to suit your local site's limits, taking full advantage of the higher FPS limit for bolt-action sniper rifles. One edge this Tanaka clone platform has over the Japanese-made original is its GBB/VSR-style HOP-up bucking design, making HOP-up upgrades more accessible.

In terms of looks and ergonomics, the LSS M700 is at the cutting edge, equipped with a licensed replica of the CAA RBS stock with an adjustable cheek riser and an M16A2 pistol grip, which is compatible with GBBR and real steel AR grips. The handguard features a negative space attachment system to save weight and includes a 20mm Picatinny rail adapter, ideal for a bipod. If you're ready for a sniper rifle at the peak of realism and modern handling, the King Arms MDT LSS M700 Tactical Gas Sniper Rifle is ready for you!

If you love a full-fat sniper rifle build with no realism compromises, the King Arms MDT TAC21 Gas Bolt Action Sniper Rifle Version II should be in your sights! A hefty, full metal build with a gorgeous CNC aluminium chassis and AR-15 furniture, this is as realistic as Airsoft sniper rifle builds get, equipped with Tanaka-based internals with the versatile PCS adjustable FPS bolt.

The PCS bolt allows FPS to be tuned, from 200 FPS using standard green gas and 0.20g BBs, up to 410 FPS. This allows you to tune FPS to suit your local site's limits, taking full advantage of the higher FPS limit for bolt-action sniper rifles. One edge this Tanaka clone platform has over the Japanese-made original is its GBB/VSR-style HOP-up bucking design, making HOP-up upgrades more accessible.

In terms of build quality, the TAC21 is an absolute beast, the type of platform which will definitely draw curious skirmishers in the safe zone. Its AR GBBR-compatible pistol grip and buffer tube allow for loads of customisation options, and its seamless upper 20mm Picatinny rail means you can mount a scope and Runcam at the same time, with plenty of space to spare. If you're ready to take your sniping game to the next level of realism, the King Arms MDT TAC21 Gas Bolt Action Sniper Rifle Version II is ready for you!

If realism comes first in your arsenal, the EMG Daniel Defense® MK18 MOD 1 GBBR is a fine choice! A stunning full metal build licensed by Daniel Defense via EMG, this MK18 GBBR is based around the Western Arms gas blowback system, meaning peak realism, even down to the shape of the internal components, far exceeding even other GBBRs.

Inside, the OEM, King Arms, has furnished the build with robust steel trigger parts and a steel bolt catch, getting ahead of known failure points in high-wear components and saving you a wad of cash when it comes to upgrades. Also present is a 6.05mm tightbore inner barrel, providing an accuracy boost with high-quality ammo.

On the outside, this build is a perfect match for real MK18 MOD 1 rifles built by Daniel Defense, from its gorgeous engraved trademarks to its flawlessly machined DD MK18 quad rail handguard. If you're a fan of the MK18, looking for the most realistic external build out there, the EMG Daniel Defense® MK18 MOD 1 GBBR is one of the best options out there!

If realism comes first in your arsenal, the EMG Daniel Defense® MK18 MOD 1 GBBR is a fine choice! A stunning full metal build licensed by Daniel Defense via EMG, this MK18 GBBR is based around the Western Arms gas blowback system, meaning peak realism, even down to the shape of the internal components, far exceeding even other GBBRs.

Inside, the OEM, King Arms, has furnished the build with robust steel trigger parts and a steel bolt catch, getting ahead of known failure points in high-wear components and saving you a wad of cash when it comes to upgrades. Also present is a 6.05mm tightbore inner barrel, providing an accuracy boost with high-quality ammo.

On the outside, this build is a perfect match for real MK18 MOD 1 rifles built by Daniel Defense, from its gorgeous engraved trademarks to its flawlessly machined DD MK18 quad rail handguard. If you're a fan of the MK18, looking for the most realistic external build out there, the EMG Daniel Defense® MK18 MOD 1 GBBR is one of the best options out there!