Two-Tone Airsoft Sniper Rifles

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

The CYMA CM.099 is a faithful replica of the infamous VSS Vintorez Sniper Rifle, a specialist Russian DMR from the AS VAL family that fires the specially-made 9x39mm. This Airsoft Electric Gun replica ticks all the right boxes for a VSS replica, including a rear-wired Stock which makes battery installation much easier than other VSS models.

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

Not content with just creating a faithful replica, Novritsch has applied its critical eye to the design and added a left/right swappable bolt handle, CNC machined receiver and spiral fluted outer barrel, furnishing the no-frills militant design of the L96 with some modern luxuries. While it looks fantastic on the outside and is built like a tank, the good news does not end with externals

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you want to outshoot the other snipers in game without the trouble of building, upgrading and tuning yourself, the Novritsch SSG96 will do exactly that!

In the real steel world, the 10/22 rifle platform is probably the last weapon anyone would choose to take into combat, but in the Airsoft world, you would be hard-pressed to find a more practical GBBR than the Novritsch SSQ22! This modernised Ruger 10/22 style replica puts performance first while providing the exciting blowback and realistic mag capacity GBBR enjoyers will appreciate.

On the outside, Novritsch has been up to his usual tricks, decking the SSQ22 out with an M-LOK handguard, lengthened 20mm Picatinny receiver rail and the up-and-coming 1913/20mm Picatinny stock mounting interface featured on the Sig MPX and MCX, amongst others. On the inside, the heart of the SSQ22's setup is its Maple Leaf flat HOP-up rubber which helps stabilise the BB in flight and ensures it enters the barrel precisely centred for more consistent shots down range. If you are thinking about giving the DMR playstyle a go but don't fancy running a 5KG SR25 setup the SSQ22 is the lightweight DMR platform you have been waiting for!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

If you are looking for a cost effective starting point to try your hand as an Airsoft sniper, or you need an ultra-lightweight counter sniping solution for those moments you find yourself pinned down, the M52 from Double Eagle would fill the role well. This sniper rifle comes out of the box firing around 380 FPS with a smooth bolt pull, enabling faster follow up shots and making this rifle accessible for those with lower physical strength. The M52 is constructed entirely from lightweight ABS polymer and includes an alloy 20mm Picatinny receiver rail and alloy bolt handle to add rigidity where needed. 

A high quality Airsoft replica of the Steyr SSG sniper rifle, consisting of a lightweight polymer Stock with alloy bolt, barrel and receiver, complete with an accurately recreated straight pull bolt.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

A bolt action, spring powered sniper rifle with an aggressive and modern aesthetic. This is perfect for the sniper who wants an up-to-date rifle which is easily transported thanks to the folding stock.

Sick of having the same old Airsoft sniper rifle as everyone else on the market? Look no further! This is the most tactical and advanced sniper available, without completely destroying your own bank balance. 

A hefty bolt action spring powered sniper rifle with a sleek, modern sporting aesthetic, a fluted barrel, folding stock for transport and a gorgeous KeyMod/20mm rail system that sets this apart from other long rifles.

A spring powered, Airsoft 6mm BB bolt action sniper rifle, based on the iconic L96 platform used by the many military and police forces around the world, including the British Army. This variant features a side folding stock and a fluted outer barrel.

Perfect for a WW2 German loadout, this Airsoft construction of a KAR98k is for those of you that appreciate realistic replicas.

In  your choice of either real or faux wood, with full alloy trimmings, this beauty features a spring bolt action and shell ejecting action for a satisfying and realistic experience.

While generally not used for skirmishing, this KAR98k is more suited for target practice re-enacting and for those of you who want to own a piece of history.

As seen in the immensely popular Battlefield game series, this is often the go-to rifle for aspiring snipers, as its easy to pick up and start picking off targets. This variant features a fluted barrel and fires at roughly 345 FPS, for a lightweight easy to cock spring for quick follow up shots.

Based on the M24 platform, this is spring powered bolt action design with a lengthy precise adjustable buttstock, a great value Airsoft sniper for those of you looking to start your sniper loadout, or find yourself playing more field skirmishes.

If you like the iconic Dragunov SVD but you don't want a rifle a mile long, the SVD-S should suit your preferences! The CM.057S Dragunov SVD-S is constructed entirely from metal with a large proportion of steel parts and is a perfect replica of the SVD variant issued to Russian paratroopers and mechanised infantrymen, the SVD-S. The SVD-S has a shorter barrel and muzzle device than the original, and also has a pistol grip and folding stock at the rear instead of the SVD thumbhole stock. This is a Dragunov for the Airsoft marksman on the move!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 590mm inner barrel to make the SVD-S a great base platform for a DMR build. If you are after a long-range platform and want something with a folding stock for better portability, the SVD-S is the right tool for the job!

If you have been keeping your eyes open for a high-quality Barrett replica you aren't the only one, but thankfully we now have one! The EMG Barrett M82A1 is officially licenced by Barrett Firearms through EMG and has immaculately engraved trademarks as we would expect, and is constructed entirely from metal save for the massive muzzle brake.

EMG's Barrett is sure to be tough to skirmish with, weighing in at an epic 5.5KG fully equipped and being 1.42m in length, but if you like a challenge you have a rotary adjustable HOP-up unit at your disposal and 400FPS straight out of the box with a remarkably light bolt pull. If you want to be able to say "mine is bigger than yours" with absolute certainty, nothing will do it like a Barrett Light Fifty!

A faithful and authentically accurate replica of the famous SVD Sniper Rifle, featuring a super realistic feel, mountable dovetail and a rotary hop unit this Russian classic is a must-have for the OPFOR sharpshooter.

Bringing Novritsch's player and industry expertise to the Airsoft sniping world in the form of the SSG10 A1, a VSR platform decked out to the nines. Sporting a 6.01 precision tightbore barrel for pinpoint accuracy and a satisfying pop with every shot, this sniper is crafted to perfection, with a suave alloy fluted outer barrel and superbly textured lightweight polymer body, finished with a comfortable rubberised butt plate for a sniper that shoots and handles like an absolute dream.

If you're looking for a spring-powered Kar98k that truly stands taller than the rest, you have found it in the S&T Kar98K. The finish on this has to be seen to be believed! It features an authentic-looking and feeling real wood stock and upper handguard, together with well-finished metal components. The metal finish is particularly noteworthy, as it doesn't give off the vibe that this is a replica rifle manufactured in the last few months, unlike so many other historical Airsoft rifle replicas. 

As seen in the immensely popular Battlefield game series, this is often the go-to rifle for aspiring snipers, as its easy to pick up and start picking off targets. This variant features a fluted barrel with port hole compensator and fires at roughly 345 FPS, for a lightweight easy to cock spring for quick follow up shots.

Based on the M24 platform, this is spring powered bolt action design with a lengthy precise adjustable buttstock, a great value Airsoft sniper with everything you need to start your sniper loadout, or find yourself playing more field skirmishes.

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

If you are a Dragunov fan but you want the latest and greatest version of the iconic Russian DMR rifle, this is what you need! The CYMA CM.057T is a great replica of the SVD-M, the latest SVD variant to serve with the Russian armed forces. The CM.057T boasts full metal construction with a large proportion of steel in its build and weighs a substantial but not over the top 3KG approximately, meaning your mobility will not be compromised when carrying the SVD-M.

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD-M a great base platform for a DMR build. If you are after a long-range platform and want to step away from more common DMRs, the SVD-M would be perfect!

A tough constructed SVD platform replica which has had a thorough course of Westernisation in the form of a Sliding Crane Stock, M-LOK Handguard and 20mm Railed Receiver, as well as a standard threaded Outer Barrel w/ Bird Cage Flash Hider.

If you are into WW2 reenactment and you have your sights set on a Red Army loadout S&T have a real treat for you! The Mosin-Nagant M1891/30 Spring Bolt-Action Rifle Replica is an almost flawless replica of the real M1891/30 Mosin-Nagant which served the Soviet Red Army throughout WW2 and has solidified its place in history thanks to the huge volume of these rifles produced and its fanbase in the US civilian firearms world.

S&T's Mosin replica follows the same format as its superb M1903 Springfield, Lee-Enfield S.M.L..E and Kar98k replicas, boasting a gorgeous antique finish on its metal components and beautiful real wood furniture to make a rifle that would be equally at home in a museum as it would be on the skirmish field. From a performance standpoint, the Mosin-Nagant is no slouch, coming out of the box shooting at 360 FPS with a smooth bolt pull and compatibility with VSR-10/GBB type inner barrels and HOP-up rubbers. If you need a Mosin-Nagant that shoots as good as it looks, this is the one to choose!

If you are fan of historical rifles, or you partake in historical re-enactment, get excited, that's an order! The Lee Enfield Rifle No.1 MK.III has just dropped in Airsoft form! The S&T S.M.L.E is authentically constructed, with a real wood stock and metal wherever there is metal on the real rifle and is indistinguishable from the real thing in all ways but one; this one fires 6mm BBs!

Spare magazines are available here.