Big Dragon

A set of Alloy constructed Folding / Flip Up Ironsights for 20mm RIS / RAS rails, available in either Bronze or Black with Silver Trim. Both the Front and Rear Sight Post are adjustable to account for Windage and Elevation, without the use of tools. Whether you run a primary optic or you want to depend on these ironsights alone, they will be the perfect finishing touches to any loadout you're currently building.

A replica of the legendary PBS-4 Suppressor, lovingly recreated using Aluminium and with a 14mm CCW Thread, so that it can attach to more than just an AK! This Suppressor is designed for 5.45x39mm AKs (in the real world), but is an unusual design that can add a cool touch to any replica. If your Airsoft Gun has a 14mm CCW Thread, this Suppressor will fit and work, and is the ideal way to make your Gun stand out from the crowd.

If you need sling swivels, these might work! The Big Dragon Harris-style Sling/Bipod Lugs with Swivels include a pair of Harris-style sling/bipod lugs with self-tapping screw tips and a pair of sling swivels for Harris lugs. The included lugs are ideally used in real wood stocks and will require holes to be drilled for installation. Remember, measure twice and cut once!

The swivels themselves are compatible with pre-installed Harris lugs found on VSR-10, L96, M24 and M40 sniper rifles. If you have one of these rifles with harris lugs pre-installed, simply attach the swivels using the included pins and stash the included lugs away for a future project! Whether you want swivels for your existing lugs or you need harris-style lugs for your real wood-stocked Air Rifle or Airsoft gun, this set is ideal!

A classic front sight design that has been around for quite some time in the Airsoft world, this sight is usually found on KAC style replicas such as the KAC PDW, SR-25, and SR-15, but is perfectly suitable for a civilian tactical M4 build or an MK12 SPR build. The sight mounts to a 20mm Picatinny rail and is adjustable for elevation by raising and lowering the steel front blade/post using an M4/AR15 front sight adjustment tool. This sight is very sturdy and well built, making it perfect for anyone who has had bad luck with polymer sights. The sight was intended to be equally effective in use as a primary aiming device as it is as a backup sight for your optic. This sight is incredibly low profile when folded, and is perfect for setups with a big scope that would prevent bulkier flip-up sights from mounting. 

A helmet mount, designed to allow the user to fit Sights, such as Night Vision or Thermal Scopes to their FAST helmets or equivalent mount point. 

A lightweight torch designed to be used in dark conditions to spot targets, cause distractions and temporarily blind your opponents.

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

If you're like some of us, and your thumb gets tired loading your 10 mid-cap loadout, this speed loader is what you need to alleviate that thumb ache! Introducing the 1000rnd BB Speed loader from Big Dragon. This loader is compatible with an M4/AR15 low or medium capacity magazine and is capable of effortlessly filling a magazine in just a few seconds with its crank-driven operation.

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

If you are a mid-cap user, you can never have too many speedloaders! The Big Dragon 150rnd Large Speed Loader is slightly larger than the usual 90rnd speed loader, meaning you can fill most mid-caps with a single loader fill. 

The loader is filled through its fill window at the top, and to load your mid-cap, align the loading port with the fill/feed port on your mag and push the thumb plunger until it becomes firm. The thumb plunger can also be stored inside the loader for easier carry by pushing it down and pushing the side button in. 

This loader works with any Airsoft mid or low-cap mag, and if you run multiple different weights or types of BB you will need several to stay organised! 

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

A short and stylish foregrip for M-LOK rail systems with a rubberised inlay, which will give you a sturdy and comfortable platform to brace your rifle and improve your stability when shooting.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

A fully adjustable mesh lower face mask with a hard armour foam layer which not only makes this mask look amazing, but reduces the likelihood of shattered rounds making their way through the mesh.

A 14mm counter clockwise threaded Airsoft suppressor, featuring US Government military markings, designed to mount onto your Airsoft gun's outer barrel and replace the original flash hider. 

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!  

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!