Viewing 14 of 14.
grid
list
£7.99
  • Angled Grip
  • For 20mm Rails
  • Textured Surface

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

£7.99
  • Angled Grip
  • For 20mm Rails
  • Textured Surface

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

£24.99
  • Foam Filled Design
  • 14mm CW / CCW
  • Easy to Attach


    A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

    £10.99
    • Ridged Surface
    • For M-LOK Rails
    • Screws/Nuts Inc.

    A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

    £13.99
    • Adjustable size
    • Engraved & Stickered
    • Mock PEQ Battery Box

    A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

    £24.99
    • CW / CCW Thread
    • Foam Filled Suppressor
    • Thread Adaptors Included

    A foam filled Airsoft mock suppressor, designed to be attached to Airsoft 14mm threaded outer barrels, and is specially with adaptors allowing the suppressor to fit both Clockwise (CW) and Counter Clockwise (CCW) threads. 

    £11.99
    • High density polymer with steel bolts
    • Stubby design - Ideal for thumb-over-bore
    • Mounts to KeyMod handguards

    If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

    The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

    £13.99
    • Non Functional
    • PEQ Style Battery Box
    • Mock Engraving & Stickers

    A mock PEQ Box, designed to hold PEQ size Airsoft batteries for your AEG weapon enabling easy access and storage for batteries on front wired weapons by mounting onto a 20mm RIS Rail system.

    £8.99
    • Reduce Lens Glare
    • For T1/E1 Micro Sights
    • Lens Impact Protection

    An Alloy and Polymer constructed Anti-Reflection Cover for T1/E1 style Micro Red Dot Sights, which offers protection from BB impacts, as well as eliminating glare on your lens which could give your position away. 

    £8.99
    • Textured Surface
    • KeyMod Rail Foregrip
    • Low Profile Compact Grip

    A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

    £8.99
    • Textured Surface
    • KeyMod Rail Foregrip
    • Low Profile Compact Grip

    A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

    £13.99
    • Adjustable size
    • Engraved & Stickered
    • Mock PEQ Battery Box

    A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.

    £10.99
    • Quick Detach grip
    • Stubby - Good for modern shooting stances
    • Mounts to 20mm Picatinny rails

    If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

    Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

    £10.99
    • Quick Detach grip
    • Stubby - Good for modern shooting stances
    • Mounts to 20mm Picatinny rails

    If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

    Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

    All External Parts

    Go Bespoke With Your Replica

    Getting your airsoft gun is just the start of it - once you get to know what sort of replica you want, you can go ahead and fully customise it with our selection of airsoft parts. From mounts to grips and everything in between, you won’t find a better offering in the whole of the UK. 

    Plus, we offer next day delivery for all our online shoppers with UK mainland addresses, and even international delivery so if you’re overseas but spot something you like on our site, we’ve got you covered.

    Don’t stop here, either. Explore all of the airsoft attachments and accessories we have on offer, including airsoft optics, flashlights and torches, airsoft batteries and more.

    Shop our full selection online today or visit us at our store in Huddersfield where you can get an in-person feel for what’s right for you.