VP Racing Battery 7.4v 2000mAh 20C LiPo Crane Stock Battery

VP Racing Battery
Code: LP005
£29.99
  • 7.4v 2S
  • 2000mAh
  • 20C Rating

An ultra thin and lightweight crane stock battery, perfect for squeezing into the ever more popular Airsoft crane stock.

Full description

Charge this battery the right way...

Description

The battery provides 2000mAh of power with a discharge rate of 20c, giving it a 20w output. The battery is so thin it can even fit into handguards on such rifles / SMG's as MP5's. AK's, M4 & G36's. If you own an M4/15/16 crane stock and would like a battery that is likely to last all day, this is one of the largest capacity batteries  that will fit inside such a stock. 

Features:

  • 7.4v
  • 2000mAh
  • 20c rating
  • Small Tamiya
  • Approx. 10cm x 1cm x 3cm
  • 2 x cells
  • Perfect for M4/15/16 crane stocks

Package Includes:

  • 7.4v 2000mAh 20C LiPo Crane Stock Battery
  • Instruction Manual

Special Instructions:

When using your LiPo battery ensure that it does not fully discharge, otherwise you may damage or destroy your battery, if you feel that your rate of fire is decreasing then stop using your battery immediately. Battery levels can be checked by plugging a LiPo Alarm into your battery.

Safety Precautions:

Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure. 

Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be more than 1.0c as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.

We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.

Specification

General

Product Length
Approx. 10cm
Product Height
Approx. 3cm
Product Width
Approx. 1cm
Patrol Base - Warning Icon
Warnings
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area
Store in a dry place. Store in a closed container.
Keep out of reach of children.
Read label before use.

Battery Specification

Battery Type
Li-Po
Battery Configuration
Crane
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
Battery Voltage
7.4V
Battery Amperage
2000mAh
Battery Discharge Rate
25
Battery Cell Count
2
Battery Cell Voltage
3.7V
Battery Cell Height
1.5cm
Battery Wire Length
12cm

Size guide

Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.

Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.

If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.

We always recommend charging LiPos and other batteries in a charging bag.

If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.