S&T Airsoft

If you are new to skirmishing or are looking for a lightweight backup AEG in AK flavour, check this out! The S&T AK-105 Sports Line AEG is constructed primarily from high density polymer using the VFC construction style, meaning realistic disassembly for the AK realism nuts!

This AK replicates the AK-105, the mid-length AK designed to replace the AKS-74U in service with Russian special forces. Widely regarded as the best looking AK length, the -105 rocks a 12.4-inch outer barrel and side folding AK-74M stock, making it a handy platform for both indoor and outdoor skirmishes.

Inside, we are treated to a quick change spring system and 18:1 ratio steel gears running on 8mm slide bearings for a smooth gearbox sound and reduced friction. The inner barrel is a 6.02mm tightbore example paired with an alloy slider HOP-up unit so you can get the job done at long range. If you're looking for a platform that is light and fast but it has to be an AK, your needs are finally met!

If you like the Cold War AK aesthetic, you'll love the S&T AKS-74N Sports Line! Patterned after the real steel AKS-74N, the folding stock AK-74 issued to paratroopers and mechanised infantry with a Russian AK side optics rail, the S&T AKS-74N is constructed primarily from high-density polymer with alloy and steel parts, keeping weight low and agility high.

Inside, we are treated to a 6.02mm tightbore inner barrel, quick change spring system and 18:1 steel gears running on 8mm slide bearing bushings, giving you a head start over other cost-effective AEGs when it comes to internals and performance. Whether you are working on a Soviet-Afghan War loadout or you want a lightweight AK for your rebel/OPFOR kit, the S&T AKS-74N will keep you light on your feet and get the job done down range!

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

If you like AKs but don't like their weight, the S&T AK-74N Sports Line AEG is the AK for you! This AK-74N replica is constructed from high-density polymer with choice alloy and steel parts to add strength where needed. This means, despite being an AK replica this beast tips the scales at a mere 2.3kg, giving it agile handling ideal for aggressive skirmishers or younger players with less physical strength.

Inside, we are treated to some thoughtful pre-upgraded parts, even in this cost-effective"Sports Line" AEG. The inner barrel is a 6.02mm tightbore example, offering improved accuracy and a slight raise in FPS from air seal improvements. The gearbox is version 3, with an alloy shell and steel 18:1 ratio gears running on 8mm steel slide bearings, meaning a smooth gearbox report with compatibility with common upgrade parts for those who want more. If you like the idea of a featherweight AK and are into the Cold War aesthetic, this is the AK to go for!

If you need a gun on your gun so you can shoot while you shoot, the S&T G316 Grenade Launcher is ideal! This imposing piece of equipment is designed for AR36 platform Airsoft guns, and will install in place of your handguard to provide an awesome under barrel 40mm Grenade Launcher for you to effortlessly fire Airsoft MOSCART Grenades from underneath your Assault Rifle. 

The included handguard is designed to replace either the K or the E (full-length) AR36 handguards, so if you want to add it to your AR36C you will most likely need a barrel extension to clear the handguard. If you want a serious firepower upgrade for your AR36, then the S&T G316 Grenade Launcher is just what you were looking for!

If you need short mags for your S&T Sterling or E-11 Blaster custom build, you just found them! The S&T 50rnd Short Mid-Cap Mag for Sterling AEG is constructed with a steel shell, polymer internals and a steel feed spring and is compatible with all S&T Sterling AEG variants, including the E-11 Blaster custom. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. If you run an S&T Sterling and want more compact mags, here you go!

An Aluminium & Steel constructed replica of the infamous PSO-1 Scope, which is designed to attach to SVD and SVU Airsoft Sniper Rifles. This removes the need for any special mounts, as the Sight has Dovetail Mount integrated into the side. The Scope features the typical SVD-type reticule with a rangefinding cheat sheet in the sight picture.

If you need an Airsoft area denial tool a MOSCART launcher would be the one to go for. The S&T 120rnd 40mm MOSCART Gas Grenade is compatible with Airsoft 40mm MOSCART grenade launchers and is powered by green gas with a 120 BB capacity. The grenade can be loaded using a speed loader through the apertures on the front and the gas fill valve is also on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs.

When fired in a MOSCART launcher this shell will dispense all 120 BBs in a righteous cloud of fury and has the potential to clear a corridor or bunker in a single shot!

Looking for a rifle case without the chunky and blocky form of a polymer hard case? Sometimes discretion is the best form of security! The Semi Hard Gun Case Version 2 from S&T combines the crush resistance of a polymer case with the discrete looks of a nylon gun bag to provide the best of both worlds, and draw fewer eyes if you take a train to your local site!

This case features velcro compatible internal fabric with removable and reconfigurable retainers for your rifle and high-density foam blocks to ensure the rifle sits snugly and securely inside the case. To aid you in carrying it to the game, the case comes with an integrated dual carry handle, a messenger bag style strap, and a backpack style harness, allowing you to choose the most comfortable carry option for you!

Whether you are looking for a cheap route into historical reenactment or a sniper rifle with more classic styling, the S&T M1903A3 Springfield ABS Stock Version was made with you in mind. This spring-powered bolt action rifle replica boasts full metal construction, VSR-10-based internals and a lightweight faux wood ABS polymer stock, reducing weight and allowing you to use this Springfield as you would a VSR-10; with no guilt about getting it dirty and dinged up.

For those who must have an optic, a scope mount is available, and those who need upgrades will be happy to learn that almost any part you would need to upgrade on the Springfield is compatible with VSR-10 parts. As it comes, we are treated to a 6.03mm tightbore measuring an epic 518mm in overall length, giving the Springfield an accuracy edge straight out of the box. As an alternative to the VSR-10 for a sniper rifle build or shell ejecting rifles for reenactment, the S&T Springfield ABS stock version perfectly marries the classic look with skirmishable practicality!

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

If you feel the need to arm yourself with a "noob tube" for Airsoft, a fine replica of the latest and greatest 40mm grenade launcher to be issued to both the US Army and UK Special Forces will be of interest! The S&T M320A1 is a highly modern launcher sporting ambidextrous functionality, side mounted grenade launcher ladder sights and robust yet relatively lightweight construction.

The true benefit of the M320 platform is that it can be used either as a stand-alone launcher, with its included sliding adjustable stock, or as a weapon-mounted launcher with the stock removed to reveal its integral 20mm Picatinny mounting apparatus. Swapping between the two configurations takes mere seconds, so if you are the indecisive type of grenade launcher user this will suit you well!

An extremely authentic 1:1 scale Airsoft replica of the infamous Springfield M1903A3 bolt action rifle that saw service throughout WW1 and WW2, this spring powered replica is constructed from genuine wood and alloy.

We put together this package because we couldn't resist. The combination of the S&T Kar98k and the ZF39 scope is one to be marvelled at, not only for its good looks! The ZF39 by S&T is genuinely a top-quality optic, with crystal clear glass and excellent eye relief. The S&T Kar98k is one of the most authentic I have ever seen, and shoots like a laser to boot. A match made in heaven? We certainly think so!

If you are ready to up your Airsoft game, adding a grenade launcher to your arsenal is a sure way to have the enemy on the run! The US Grenadier M320 Bundle was put together to give milsim inclined Airsofters a ready-to-go 40mm grenade launcher set which can either be weapon mounted or used as a stand-alone launcher. 

The package includes the S&T M320A1 40mm Grenade Launcher and 2 x S&T 120rnd 40mm MOSCART grenades, leaving only the BBs and gas to buy. Whether you are busting bunkers or dominating the corridors of your local CQB site, a 40mm launcher will be a true asset to your loadout!

If you like a challenge in game, this will certainly give you that! The S&T ST870 Marine Magnum is a single-shot pump action shotgun boasting full metal construction, a 6.03mm tightbore inner barrel, a TDC HOP-up unit and 400 FPS +/- 10% out of the box. "But why on earth would I want a single-shot, high FPS shotgun?" we hear you ask...

The ST870 may not be your CQB platform of choice, but it fulfils a different role. This shotgun is intended to simulate a real M870 shotgun firing 12 gauge slugs which are a single, solid projectile intended for long-range engagements and hunting. This means the ST870 falls into the same class as DMRs and Sniper Rifles when it comes to skirmishing, with the added challenge that there are no iron sights or rails to be found. If you are finding skirmish life a bit too easy with a sniper rifle, the ST870 will make you work even harder but give you even more satisfaction when you land the kill!

An accurate 6mm BB Airsoft Electric Gun replica of an iconic piece of movie history, an all Alloy constructed replica of the Sterling E-11 Blaster. 

Available in multiple sizes these 40mm Under Barrel Mounted Airsoft Grenade Launchers are designed to fire 40mm MOSCART Grenade, and can be attached to the underside of a range of Airsoft Rifles.

If you're a British firearms enthusiast you must recognise the L2A3 Sterling SMG, the iconic British submachine gun which served with the British Army throughout the Cold War and beyond. Replacing the STEN gun, the Sterling was everything the STEN should have been, offering improved ergonomics, semi-auto and full auto fire modes and a complex but highly functional folding stock. This SMG was one of the few British firearms squaddies reportedly liked, and the S&T replica matches up with the Sterling's superb reputation in the real steel world. 

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T L2A3 is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it on the sofa. Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the outside of the outer barrel. If you're looking for an old-school SMG or are working on your historic British firearms collection, you need the S&T L2A3 MK4 Sterling!

A 45 round spring-fed magazine for the S&T ASW338 sniper rifle.

If you have always wanted to sprint around with a support weapon like John Rambo, but you don't want your arms to fall off by the end of the day, then look no further than S&Ts M249 PARA Sports Line. Constructed from lightweight but tough polymer that keeps the overall weight low, this 249 variant lets you run around the field laying down suppressing fire with ease.

The S&T version is the lightest true LMG we have yet encountered, tipping the scales at a mere 3.2KG, approximately the weight of an inflated beach ball! In spite of its low weight, this MK46 still packs a heavy punch thanks to its rotary HOP-up unit, metal version 2 gearbox and 300 round STANAG mag, letting you wield this beast like an oversized assault rifle.

If you have always wanted to sprint around with a support weapon like John Rambo, but you don't have the time, or frankly the inclination to become "swole", thankfully S&T have a handy shortcut! The S&T MK46 is patterned after the special purpose version of the M249 light machine gun, also known as the "SAW", or squad automatic weapon. The MK46 was conceived to meet the requirements of US SOCOM and provide additional Picatinny rail space for the addition of optical sights and also sought to reduce the overall weight of the M249 platform.

The S&T version is the lightest true LMG we have yet encountered, tipping the scales at a mere 3.2KG, approximately the weight of an inflated beach ball! In spite of its low weight, this MK46 still packs a heavy punch thanks to its rotary HOP-up unit, metal version 2 gearbox and 2000rnd auto winding electric box magazine.