Snow Wolf AUG A1 Military Bullpup AEG w/Scope

AUGs always have a unique futuristic styling to them and this one is no exception! With modern ergonomic features, ambidextrous controls and ultra slick quick disassembly, the real steel rifle was designed way back in 1977! Known as the STG 77 in Austrian service, the AUG went on to serve with numerous armed forces and police units around the world and was manufactured under license in Australia as the F88 Austeyr, which also served in the New Zealand armed forces and was later developed into the Lithgow F90, the next generation of Aussie AUG.

The Snow Wolf AUG A1 Military Bullpup AEG with Scope is the classic AUG design for those of you that like to things clean and simple. It packs a whopping 20inch barrel within all stored in a total length of a mere 80cm. This is the inherent advantage of the backwards rifle; you get a shorter length rifle with a full-length barrel and can do both jobs with a single gun. So let's get into it shall we?

Starting at the front of the rifle, we can see that e outer barrel of the AUG is equipped with 14mm CCW male threading, which means that if you want to add another tactical muzzle device such as a tracer or suppressor, you've got the option to. Following the flash hider, we have the folding foregrip, spring loaded and flipped by pulling the grip out slightly and angling for easy swapping. Of course, using the foregrip will be a boon for sturdy aiming and picking off those further away targets, because bullpups are tricksters, they may look short, but conceal that coveted longer barrel for longer range shooting!

Just like the real AUG, the Snow Wolf has a hot swap barrel system. This means you can quickly remove the outer barrel either for maintenance or to swap between barrel lengths. To remove the outer barrel you will need to lock the charging handle back and up into its "safety notch" and push and hold the catch found on the left side of the receiver, between the folding front grip and the trigger guard. With the barrel removal catch held down, the barrel can be rotated by just a few degrees clockwise with the barrel facing away, and you can pull the entire outer barrel out. The external section of the outer barrel is constructed from alloy, and the section inside the receiver is constructed from polymer, coloured in sleek black.

Moving rearwards and upwards, we come to the sight. The Para AUG features an integrated 3x magnification optical sight, just like the real military version of the AUG rifle. This sight is remarkably good for an integral optic and has decent eye relief, perfect for use with sticker goggles and eye protection. The crosshair is a ringed cross, allowing for precise aiming using the crosshair itself, and rapid snap shooting using the ring. Fully adjustable for both windage and elevation, the integrated optic is altered using the dials located on the right side and bottom of the optic tube. On the top of the scope, we can find a set of built-in backup iron sights, known as BUIS. These are designed to be used for close-range engagements but can also be used to track the flight path of your BBs and adjust your aim when firing at long range.

Over on the left side of the upper the charging handle of the AUG is housed. Constructed from high-density polymer, it connects to an aluminium rod inside the receiver which actuates the mock bolt, which reveals the rotary HOP-up adjuster inside the ejection port when pulled back. The charging handle can be locked by pulling it to its rearmost point of travel and rotating it upwards into its "safety notch", which will hold the mock bolt back whilst you adjust your HOP-up. The adjustable HOP-up lets you tune the R904 for different ammo weights and provides an extended range by applying backspin to each BB. An advantage of the AUG, over something like an M4 is that the HOP is revealed on either side of the rifle, when the handle is pulled and the rubber caps are removed, making for a more ambidextrous experience.

The ambidextrous nature of the AUG continues with the safety latch, which is easily accessed from either side of the rifle with, both the thumb and forefinger. AUG users enjoy controlling a rifle a little differently than your average gun, with the safety being a push-through button, as opposed to a standard flat fire select. Located just above the pistol grip, the button is on safe when the button protrudes to the right hand side and pushing the safety to the left will release the trigger lock. The AUG makes use of a two-stage trigger system, which means a short pull of the trigger will fire semi-automatic, and a full pull to the rear will fire fully automatic. This means if you need to suddenly put a burst down range to deal with a moving target it is faster to switch modes with the R904 than practically any other AEG out there.

The grip and stock of the AUG are integrated into one piece as a part of its space-age design, known as the "chassis" of the rifle. Being of one continuous piece, the receiver and stock are especially robust and sturdy, constructed from high-density reinforced polymer complete with a high quality smooth texture. This modernisation of the AUG includes raised textured panels on either side of the grip and on the butt stock itself to assist in wet weather use.

The AUG features an enlarged trigger guard, which is more akin to your actual grip length than the average rifle. Largely responsible for the AUG's recognisable silhouette, it allows fast access to the trigger, so if you use thick gloves when skirmishing, the AUG's got you covered. This trigger guard can also do double duty as an angled foregrip for use in compressed stances in CQB situations.

The magazine release of the AUG can be found on the bottom of the stock, just behind the magazine well, and is centrally positioned to allow for ambidextrous use. Ahead of its time, this mag release was one of the first modern bullpup rifles to enter the market and the AUG nailed it first time!. Unlike the Tavor there is no chance that you will accidentally hit the mag release and dump your magazine, and unlike the L85 you don't have to be purebred right-handed to operate it efficiently.

Boasting a wealth of impressive internals, the Snow Wolf AUG comes with a Version 3 gearbox, which is stronger and more capable than Version 2 gearboxes and can handle more stress intensive parts such as stronger springs, so if you ever fancy upgrading the AUG down the line, you have that option. The gearbox also includes 7mm bearing bushings, reinforced steel gears, a reinforced piston with a directional piston head and a bearing-equipped spring guide, guaranteeing smooth running and a longer life than previous generations. The long inner barrel of this compact AEG also lends itself to superb performance, and the rotary style AUG HOP-up unit is known to be one of the best out there and formed the basis for the rotary unit found in more recent M4/AR15 AEG releases.

So if you're looking for something a bit different, or maybe you'd want to try a rifle in bullpup configuration, maybe you can be converted. Certainly more unique than your average M4s, the bullpup design allows for a long barrel to facilitate both long range and close range CQB combat. The AUG also boasts impressive internals, as well as even weight distribution and integrated sight and scope. It may be a bit of a 'Marmite' design, but the AUG will always see you right in combat.

Features

• Tough but lightweight polymer construction
• Alloy scope, barrel and rail
• Bullpup design - Short length, long barrel
• Ambidextrous magazine release
• Enlarged trigger guard
• Ambidextrous safety - Push through design
• Two-stage trigger - Short pull for semi, long pull for full auto
• Flip down foregrip
• QD Sling socket at the rear left of the stock
• Front sling point at the front of the receiver
• Quick removable barrel - Lock the charging handle, hold the catch and the barrel comes out!
• Quick removable upper receiver - One pin to remove
• Swappable ejection port cover - Access your HOP-up adjuster from either side!
• Version 3 gearbox with MOSFET pre-installed - Fast trigger response, circuitry protection
• Rotary adjustable HOP-up - Accessible when the charging handle is pulled and locked back
• Large rubber butt plate - Very grippy, great for use with body armour/plate carrier
• Integrated 3x Optical sight - Ringed crosshair reticle, fully adjustable with BUIS on top
• Compatible with AUG AEG aftermarket parts, magazines and spares

Package Includes

• Snow Wolf AUG A1 Military Bullpup AEG w/Scope
• 350rnd High capacity magazine
• User manual