Airsoft Magazines

If you're a realism-focused player running an AK AEG, this mag is ideal! The ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs boasts a unique modern design with a flat baseplate for mag-podding, a witness window on each side to keep track of rounds remaining and a dot matrix so you can mark your mags with a paint pen. The party trick of this magazine is its ability to switch capacities from a realistic 30 BBs up to a skirmish-friendly 130 BBs by removing the internals from the shell and flicking the switch on the internal body. 

As with other spring-fed mid-cap magazines, the 30/130rnd Variable-Cap Mod.1 is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. If you rock an AK AEG in game and want the choice of firepower or realism without bringing two types of mag, load up on the ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs!

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

A  spare or replacement 25 round Airsoft magazine designed for use in both the RAVEN EU Series and  WE Europe's G-Series of gas blowback Airsoft pistols. 

Perfect for any Airsofter wielding an Airsoft pump action shotgun; this pack of Airsoft shotgun shells contains 3 red and 3 black shells, each capable of holding 30 rounds of 6mm Airsoft BB ammunition.

This Magazine is designed for Airsoft M4/AR Platform Electric Guns, and features a gorgeous, modern design with Mock Bullet Window and Thick Rubber Baseplate. It holds a total of 150rnds and is filled from the top using a Speedloader. If you need an ultra modern Magazine to finish off your Custom M4 build, then the Battleaxe 150rnd Mid-Cap Polymer Magazine for AR-15/M4 is the ideal choice.

ASG MK23 Socom magazines are currently readily available at an affordable price. Delivering great gas efficiency too; on a good day expect up to three if not more full magazines worth of shots from one charge of gas.

If you have treated yourself to the phenomenal new SMG from Double Eagle, the UTR45, you will want to stock up on these! This 120rnd AEG magazine is compatible with the UTR45 and is loaded using a standard speed loader or loading rod through the feed/fill port at the top of the magazine. 

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

A Polymer constructed Magazine for AR / M4 / M16 Platform Airsoft Replicas, which holds 150rnds total in a Spring-Fed Mid-Cap design that will feed all the BBs until empty, with none of the rattle that you get from High Cap Magazines. Compatible with a range of brands such as CYMA, DBoys, JG, A&K, Arcturus and Tokyo Marui, this is the perfect purchase for any AR Platform operator wanting to stay in the fight for longer without refilling mags.

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you run an AK and you want capacity but without the dreaded battle rattle, CYMA has a treat for you! The 200rnd Polymer Mid-cap Magazine For AK AEG packs a whopping 200-round capacity into a standard length spring loaded mid-cap, meaning no issues getting nice and low in the prone position and of course, no tactical maracas as you chase the enemy down!

These mags are styled after modern polymer magazines for 7.62x39mm style AK rifles and have reinforcement ribs across the design and dual witness windows on each side showcasing mock cartridges for added realism. The magazine is also marked with recessed numbers indicating the capacity of the real magazine, and at the baseplate, we are treated to realistic 7.62x39mm calibre markings. The polymer used in the construction of these mags is very strong and has a textured feel, a hallmark of robust high density polymers with fibre reinforcement. If you need AK mags with a modern look, no battle rattle and an impressive capacity, these are the ones to get!

Looking for spare magazines for the VORSK VMP-1? You have found them! These magazines are constructed from alloy with a steel feed spring and brass valves and hold 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. Please note, these magazines do not include the polymer magazine sleeve supplied with the original magazine included with the VMP-1 SMG. 

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

A 25 Round Green Gas Powered Magazine designed for the Airsoft GLOCK 17 Gen4 by UMAREX. This magazine works with the Umarex/VFC Glock 17 GBB and is also compatible with the KRYTAC Maxim 9 GBB but is not compatible with 4.5mm Air pistols. 

If you're after spare AEP magazines you are in luck! The CYMA 30rnd Magazine is compatible with the CM.030, CM.122, CM.123, CM.126, CM.127 and CM.132 AEP, and should also fit the ASG XP17 Challenger AEP. This magazine is constructed with an alloy shell, polymer follower and steel feed spring, and can be loaded using an Airsoft speed loader through the feed lips at the top of the magazine body. This magazine holds 30 BBs and is a very compact design so it is easy to carry loads!

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

Looking for AK74 magazines for a modern loadout? The 150rnd Mid-cap from CYMA is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. For a modern AK74/105 loadout this magazine is perfect. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or AKS74U AEG but will fit and feed in most AK platform AEGs.

Looking for the biggest capacity with no rattle? This NUPROL 200rnd Mid-cap is an extended design, allowing an extra 70 BBs to squeeze in when compared to 30 round style mags. Its spring-loaded mechanism means you will be able to sneak around with ease with none of the tell-tale "battle rattle" you would have from high-capacity mags, and benefit from some extra firepower at the same time! This magazine is loaded just like any other Airsoft mid-cap, using a speed loader or loading rod through the fill/feed port at the top of the magazine body. The added benefit of this mag is its much more aggressive 40-round style design, which gives your rifle the "big boy" look of extra capacity, making it that more intimidating to face down with on the skirmish field.

This is a spare or replacement Gas Magazine for the Action Army AAP-01 Assassin Pistol, that holds a total of 23rnds and is based on the EU Series design. It is filled with BBs and Gas just like any other Pistol Magazine, using a Speedloader to feed BBs in through the feed lips, or holding down the follower to fill the BBs from the bottom of the Magazine. The Inlet Valve on the base of the Magazine is where you should insert your Green Gas bottle to fill it.

If you own an AAP-01 Assassin and want to spend more time dumping magazines on Full Auto, and less time fumbling around with a Speedloader, then you will need a backlog of Spare Magazines.

The perfect magazine to give you the ultimate fire-power and suppression from your G&G AP-9 AEG. Incredibly satisfying to hold and use thanks to the very thick and robust polymer construction.

This is an Extended Magazine for a range of CYMA AEP Airsoft Electric Pistols, which not only has an awesome external design to look like the real thing when inserted, but carries loads more BBs and allows you to make the most of the 'Full Auto' function on your AEP.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are running the gorgeous Army Armament Sand Viper you will need some equally gorgeous magazines to feed it! The Army Armament 28rnd Magazine for TTI Sand Viper is intended for the Sand Viper, of course, and comes with a CNC machined Aluminium baseplate finished in bronze sporting the Taran Tactical Innovations logo. Being a Hi-capa-based design, this magazine should also fit and feed in most TM-compatible Hi-capa pistols.

The magazine follows the standard GBB pistol mag layout, with the gas fill valve located on the baseplate, requiring both the magazine and your gas can to be inverted to fill. The mag can be loaded through the feed lips or through the feed channel on the front when the follower is pulled down, either by hand or using an Airsoft speed loader. If you want to load up on mags for your Sand Viper but you need the matching baseplates, here you go!

A 25 Round Green Gas Powered Magazine designed for the GLOCK 17 Gen5 by UMAREX.

This Steel constructed 200rnd Magazine from Battleaxe is an extended design, which makes it slightly longer than your typical STANAG design. It is a Mid-Cap Magazine, meaning it is filled using a Speedloader, doesn't rattle like a High-Cap and will also feed until the Magazine is depleted, with no winding! If you own an AR platform rifle and you don't want to wind your magazines, and you want the ability to sneak up on your enemy without the tell-tale battle-maracas sound of a High Cap Magazine shaking away, then this is the Magazine for you. 

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.