Airsoft Rails

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

With the Novritsch SSX23 Frame Rail, you can mount a flashlight or runcam on the underside of your barrel. It is constructed from strong, lightweight aluminium and is attached to the SSX23 barrel via 2 mounting screws. To attach the frame rail you are required to remove the slide, and then drill two holes at the front under the barrel, where the indents are. After this, you can screw the frame rail in and you're good to go!

The Novritsch SSX23 Frame Rail is a game changer if you skirmish in dark CQB arenas and need the flashlight to stay ahead of the opponents. Instead, this rail section can house a zoom/runcam to capture any long-range or clutch BB shots so you can brag to everyone that you are the ultimate Aisoft extraordinaire!

If you like to chop and change your setup regularly, the CYMA QD 20mm Picatinny Rail Adapter for M-LOK should be of use! This 20mm Picatinny rail adapter for M-LOK slots deviates from the norm in its QD mounting mechanism, allowing you to quickly mount, remove or reposition the rail without any tools. If you're fed up with fiddling with M-LOK nuts, this rail helps you avoid that!

The rail measures approximately 80mm in overall length and offers 7 slots to mount your 20mm Picatinny accessories. Whether you appreciate the time-saving nature of QD accessories or you like to alter your primary setup regularly to try out new configurations, the CYMA QD 20mm Picatinny Rail Adapter for M-LOK will change your game!

If you're stuggling to get a good view through your red dot sight when wearing face protection, the WADSN High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

The High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box should fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard and is also compatible with the Novritsch Red Dot Sight V3, Vector Optics Maverick, Vortex Sparc Solar and Holosun 403B. Being slightly higher than a standard T1 mount, the High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you are looking for a way to mount a tracer unit to your AEP, this is what you're after! The 20mm Upper Rail with Thread Adapter is designed to fit the CM.030, CM.127 and ASG XP17 Challenger AEP pistols, and provides both a 20mm Picatinny upper rail and 14mm CCW male threads so you can dress your AEP up to impress!

The part is constructed from alloy and is finished in matt black, and adds a whole new look to your AEP with its angled ports at the front on either side, and weight reduced 20mm rail across the top. Those worried about losing their iron sights; fear not! The rail has a set of fixed backup iron sights built in, so if you aren't quite ready for a red dot sight you can still put rounds on target.

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 2'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

The 5KU 7-Slot Picatinny rail for Zco Handguards is an Airsoft modular rail panel designed to fit onto special ZCO hand guards found on ARCTURUS platforms, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail has 7 slots of Picatinny slots, giving you a great number of slots for some personalisation and mission-essential attachments. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has acquired a new ARCTURUS Zco rifle and is looking to elevate their gun to the next level by attaching parts and accessories with more standard attachment interfaces.

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you have a TM MK23 you know that bad boy deserves a tactical flashlight or laser aiming module! The Laylax 20mm Picatinny Rail Adapter Version 2 is designed for exactly that and mounts to the ironically named "universal rail" on the MK23 dust cover/frame to provide a rail which actually is universal, the 20mm Picatinny rail.

The adapter itself is constructed from aluminium and has a matt black anodised finish applied, blending perfectly with the MK23's stealthy form. The rail is approximately 7cm long with 5 slots machined in and has a gentle bevel at the front to aid with re-holstering.