Big Dragon

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

If you are a mid-cap user, you can never have too many speedloaders! The Big Dragon 150rnd Large Speed Loader is slightly larger than the usual 90rnd speed loader, meaning you can fill most mid-caps with a single loader fill. 

The loader is filled through its fill window at the top, and to load your mid-cap, align the loading port with the fill/feed port on your mag and push the thumb plunger until it becomes firm. The thumb plunger can also be stored inside the loader for easier carry by pushing it down and pushing the side button in. 

This loader works with any Airsoft mid or low-cap mag, and if you run multiple different weights or types of BB you will need several to stay organised! 

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

A vertical foregrip for 20mm RIS rails with a built-in spring-powered foregrip which will deploy at the press of a button.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

A compact 40mm MOSCART grenade launcher. The perfect combination for any Airsofter looking to make a scene, clean up any CQB killhouse in style and leave a huge mess in the same trigger pull. 

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

A mock grenade designed for attaching to your rig or placing in pouches to look like you are carrying the real thing. 

A steel-constructed sling plate designed to fit on Airsoft M4/15/16 AEG (Electric) Receiver.

A set of rail panels which can be cut to size to give you a better grip on your 20mm RIS / RAS Rail set.

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!  

Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!  

A set of Alloy constructed Folding / Flip Up Ironsights for 20mm RIS / RAS rails, available in either Bronze or Black with Silver Trim. Both the Front and Rear Sight Post are adjustable to account for Windage and Elevation, without the use of tools. Whether you run a primary optic or you want to depend on these ironsights alone, they will be the perfect finishing touches to any loadout you're currently building.

A set of Alloy constructed Folding / Flip Up Ironsights for 20mm RIS / RAS rails, available in either Bronze or Black with Silver Trim. Both the Front and Rear Sight Post are adjustable to account for Windage and Elevation, without the use of tools. Whether you run a primary optic or you want to depend on these ironsights alone, they will be the perfect finishing touches to any loadout you're currently building.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

A replica of the legendary PBS-4 Suppressor, lovingly recreated using Aluminium and with a 14mm CCW Thread, so that it can attach to more than just an AK! This Suppressor is designed for 5.45x39mm AKs (in the real world), but is an unusual design that can add a cool touch to any replica. If your Airsoft Gun has a 14mm CCW Thread, this Suppressor will fit and work, and is the ideal way to make your Gun stand out from the crowd.