WE Airsoft

If you're running a WE GBBR, whether it's the SCAR-L, L85/SA80, Type 91, Keltec PLR-16, KAC PDW or M4 variant, this is the one mag you need to keep them all well-fed! Constructed with a steel shell, alloy/polymer internals and brass valves, this magazine is designed for WE Open Bolt GBBRs and holds 30 BBs filled through the feed lips, either with a speed loader or by hand. This V3 version has been refined to improve the reliability and consistency, to ensure your replicas feed perfectly every time.

With wide compatibility and a strong but relatively light build, these magazines even allow you to switch off the "bolt lock" function using the catch on the top, meaning you can dry fire for a laugh or to practice weapons handling without holding the bolt catch while doing it. Compatibility-wise, these are strictly for WE Open Bolt GBBR rifles but will work in any WE Open Bolt GBBR which takes STANAG-style mags.

If you want to keep your B9 pistol running when the cold sets in a CO2 mag is the only way to do it. The WE 25rnd CO2 Magazine For B9/92 is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE B9 and B92 pistols and will not work in other versions. The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. 

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

A spare or replacement Gas Magazine for the WE branded EU17 series Pistols. It is designed for the GEN 5 iteration of the EU17 but will function with GEN 3 and GEN 4 Pistols as well. It holds a total of 25rnds and can be filled with a Speedloader from the top or bottom.

An absolute classic, still in use today by a whole host of countries for both service and recreational shooting, now as an Airsoft pistol!

The brilliant blue slide, gives this EU18C a striking and, but more importantly, it requires no UKARA to purchase and with it being factory painted you can get straight into the action and start skirmishing ASAP.

A reliable gas blowback pistol, with lightweight polymer frame and tough alloy slide, with both semi and fully automatic functions, this is a go-to tried-and-true pistol for many Airsofters.

A Gas Blowback Magazine designed for the WE Europe EU-Series Pistol Range, designed to allow the user to carry more rounds than standard Airsoft Pistols, giving the user a tactical edge in the field. 

A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.

This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.

An absolute classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting,

The brilliant blue slide, gives this EU17 a striking and, but more importantly, it requires no UKARA to purchase and with it being factory painted you can get straight into the action and start skirmishing the next day if ordered with our next day postage service!

A reliable gas blowback pistol, with lightweight polymer frame and tough alloy slide, with both semi and fully automatic functions, this is a go-to tried-and-true pistol for many Airsofters.

A Gas Blowback Airsoft Pistol designed by WE Europe based off the Traditional 1911 Pistol Design. The Pistol is constructed with an Alloy Frame, Slide, Internals and Magazine and with Polymer Grips.

If you like a pistol that is large and in charge, equally capable of being used as a sidearm or as a primary for close-quarters skirmishes, the WE Dragon Hi-capa 7.0 should be high on your list! This Hi-capa GBB platform takes a step aside from the norm with an intimidating potato masher compensated front end and a lengthy 20mm Picatinny frame rail, boasting full metal construction for ferocious recoil and a realistic feel in the hands.

For a pistol ready for some serious breaching, the Hi-Capa 7.0 Dragon is a lot faster than its size might suggest. With a split slide to improve gas efficiency and increase the cyclic rate to lightning-quick speed, this pistol is perfect for those who want to make their mark on the field! 

A Gas Blowback Airsoft 6mm Pistol Replica of the famous Russian pistol the Makarov which has been in service since 1951. 

A full blowback, semi-automatic Airsoft pistol based on the SIG Sauer P226 that comes already painted two tone blue to a high standard.

This absolute classic needs no introduction, designed by EU Europe this Airsoft pistol to replicate the appearance and feel of a traditional 1911, with traditional sights and slide, no modern frills and trinkets are necessary!

With a realistic weight and gas blowback recoil, this RIF comes pre-two-toned out of the box, so you can get it the next days so no waiting around watching paint dry!

A gas blowback Airsoft 6mm BB gun magazine designed for WE Europe's F228 series and F229 series pistols. A perfect spare to increase your trigger time, without stopping to reload. 

If you want to keep your Desert Eagle running when the cold sets in a CO2 mag is the only way to do it. The 27rnd CO2 Magazine for WE/Armourer Works Desert Eagle GBB Pistol is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE/Armourer Works Desert Eagle GBB pistol and will not work in the KWC full auto version.

The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. The mag takes 12g unthreaded CO2 capsules and a single capsule can be inserted from the left side of the magazine and tightened via the Allen screw on the baseplate. As always, this magazine will require lubrication to maintain its health in the long term, and we recommend applying some Silicone Dropper Oil to the top of each CO2 bulb before inserting it. Keep your mighty Desert Eagle in the fight all winter with this CO2 magazine!

A CO2 magazine designed for the WE EU-Series pistols, allowing you to make the move from Green Gas to CO2. The magazine is robust and gives excellent power for every shot, built from Alloy the magazine comes with a steel screw in base for extra durability. 

A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range. The weapon is constructed with a lightweight and durable Polymer Lower Frame and an Alloy Slide, making it a Lightweight yet Durable sidearm.

An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol. 

Kicking out a strong 300fps and holds up to 29 rounds per magazine. The pistol comes with one magazine and an in depth user manual showing you how to look after and dismantle the pistol.

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more. 

A High Capacity Gas Magazine for WE B92 Airsoft Gas Blowback Pistols. 

A gas blowback replica of a EU-Series EU26c select fire pistol, that is capable of single and full automatic fire. The pistol is pre two-toned blue to a high standard from the factory.

A highly ergonomic pistol for anyone with any hand size. Full metal slide and mechanical parts allows for a crisp semi action shot.

These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.

An Airsoft 6mm BB gas blowback magazine for the 4.3 Hi-Capa pistol series. The magazine is constructed from Alloy, with Polymer feed lips, base plate and follower.

A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops. 

A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops. 

If you're seeking an SA80 to complete your Squaddie kit, the WE L85A2 SA80 Replica GBBR is as realistic as they come! This full metal gas blowback rifle is constructed predominantly from stamped steel with an alloy outer barrel and olive green polymer furniture; a fantastic match for the real steel L85A2 as it was originally issued to the British Army.

Whether you're getting involved in Milsim skirmishes or want a realistic platform for training, movie making or display, the WE L85A2 is the one to go for. It kicks like a mule, operates almost exactly like the real thing and is made with the same proportions of metal to polymer as the real deal.

Compatibility-wise, the L85A2 takes WE Open Bolt M4/AR-15 magazines and VSR/GBB type inner barrels and HOP-up rubbers, meaning mags are common and a reliable design and you have access to some of the best aftermarket barrel and HOP-up bucking combos so you can maximise your accuracy and range potential. If you like to challenge yourself in game with 30-round mags, shoulder-thumping recoil and a realistic manual of arms, the WE L85A2 SA80 Replica GBBR is the way to go!

If you want some jarring recoil in your life for a more realistic firing experience, a GBBR is the way to go! The WE Apache A5 is a great replica of the iconic SMG-5, boasting majority steel construction, a 3-round burst function and ambidextrous controls, matching the "Navy" version of the SMG-5 perfectly.

Far more exciting than that is how this SMG feels when fired, the recoil is strong and the bolt speed is very impressive, and the SMG stops firing when empty with a dead man's click to usher in a reload. The steel receiver, realistic size of the trigger pack, 30-round real-cap magazine and realistic manual of arms make this the ultimate SMG-5 for Milsim, or for more serious collectors. If there is an SMG-5 GBBR shaped hole in your soul, this should sort that right out!

A Fully Automatic and Semi Automatic Generation 4 (Gen4) Gas Blowback Airsoft 6mm Pistol, designed with the longest barrel of the series, giving it the most power and kick out of all the EU-Series range.