Refine results
Refine by
Viewing 30 of 92.
grid
list
3.99
  • Replacement original part
  • For CYMA CM.041 SD series
  • Suppressor mounting apparatus for the original suppressor

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!

5.99
  • Rail Riser
  • 3.1cm Raise
  • 20mm RIS/RAS

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

7.49
  • Easy to Fit
  • Ambidextrous
  • For M4 GBB / PTW

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on GBB Gas Blowback Rifles between the Receiver and the Buffer tube allowing the attachment of Slings. 

7.49
  • Black In Colour
  • Alloy Construction
  • Replacement Sling Mount

An official spare sling hook, allowing for the replacement of the lost or broken part of your Airsoft Scorpion Evo. 

7.49
  • For QD Slings
  • Alloy Construction
  • MLOK Rail Compatible

An Alloy sling point for QD push-fit slings, which attaches to MLOK rail systems allowing you to use two and three-point sling setups with your weapon.

7.49
  • Low Profile Rings
  • For 25mm Optics
  • Fits 20mm RIS/RAS

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

7.49
  • For 25mm Optics
  • Slim Profile Rings
  • High Profile Mounts

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

7.49
  • Hand stop, rail panel, QD sling socket set
  • High density polymer with aluminium sling socket
  • For M-LOK rail system 

For those who prefer a traditional horizontal grip but still want an index point to help steer the rifle when things get up close and hectic, the Armour Hand Stop Set has your name on it! This set is easily mounted to any M-LOK rail system using a combination of screws and a push fit panel and provides a hand stop and a QD sling socket with a rail panel to go between. 

7.49
  • Steel construction
  • For AK AEG rifles
  • Attaches between the pistol grip and receiver

If you are looking for a way to run your AK on a single point sling, this steel sling point from CYMA will give you what you need! The Steel Tactical Sling Mount attaches to your AK receiver and sits between the pistol grip and receiver itself, providing a sling loop on the left side of the rifle. This sling loop is ideally suited to hook type slings and single point bungee slings. 

8.49
  • Easy to Fit
  • For M4 AEG
  • Curved Loops

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on AEG Electric Rifles between the Receiver and the Buffer tube allowing the attachment of Slings.

8.49
  • Eastic Bungee
  • Requires Whole Sling
  • Secure To Rear Sling Point

A very simple and innovative design. This adaptor secures onto the SMG7 or SMG5 sling point of your choice. You can then equip your sling of choice onto the polymer buckle. 

9.49
  • Fits 25mm Optics
  • For 20mm RIS/RAS
  • High Profile Mounts

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

9.49
  • Fits 20mm Rails
  • For 30mm Optics
  • High Profile Rings

A set of two High Profile Scope Rings for 30mm Optics, that will easily connect to 20mm RIS/RAS Picatinny Rail Systems. They have a two-piece design which makes installation very easy, and comes included an Alley Key to aid installation. They are High Profile Rings which will hold the Scope higher than standard, making it easier to aim whilst wearing Lower Face Protection.

9.49
  • For 30mm Optics
  • Set of Scope Rings
  • Low Profile Mounting

A set of Alloy constructed Scope Rings for 30mm Optics, that has a 20mm Mount on each ring for easy installation to a 20mm RIS/RAS/Picatinny Rail System. They are Low Profile Rings, which will hold your Optic low against your rail rather than reaching for the sky.

10.99
  • High Mount
  • A Single Mount
  • Additional Rails

A single raised scope mount ring, designed to securely hold an optical sight in place, while mounting onto a 20mm RIS / RAS rails on Airsoft and Air Rifles. This ring has a 30mm inner diameter making it suitable for 30mm monotube rifle scopes, and mounts to 20mm Picatinny rails. 

11.99
  • Replaces Rear Sight
  • Sight Mount Plate
  • For Red Dot Sight


A mounting plate designed to fit to allow the attachment of backup and red dot sights to TM based Hi-Capa 5.1 pistols. The plate attaches to the pistol by replacing the rear sight, and using the existing screws secures into place. The backup sight plate is constructed from lightweight yet durable 6061-T6 Aluminium Alloy and secures your sight securely to your pistol.

This mount is perfect for those Airsoft skirmishers who are looking to attach a red dot or backup sight to their pistol in order to make more accurate and quicker snap shots to get an advantage whilst playing.

13.49
  • For EU Series
  • Very Strong Mount
  • 20mm RIS/RAS Rails

A 20mm Railed Mount for EU Series Airsoft Pistols, simply sliding onto the Flashlight/Laser Slot on the underside of the frame, and providing you with both a 20mm Rail for a Sight or Scope, as well as an underside 20mm Rail for a Torch, Laser or other single slot accessory. Unlike other Frame Mounts, this one is push fit with a spring-loaded release button for easy installation and removal.

15.49
  • Raises by 1'' / 2.5cm
  • 5'' / 12.5cm Long
  • Tool-free Fitting



Ideal for Airsofters wearing full-face masks, wide goggles or simply using a very low-profile optic, this 1"/2.5cm high raiser block allows users to increase the height of their 20mm RIS rail mounted accessories to a more usable position. 

 

18.99
  • M-LOK torch mount
  • High Quality anodised finish
  • Aluminium construction with steel screws

After a high quality M-LOK torch mount? This M-LOK laser/light mount from ARES has you covered! It can be mounted on any M-LOK surface giving a variety of mounting locations and the ring which contains the torch/laser can be removed from the mount and repositioned to your liking.

22.99
  • For T1/T2 Optics
  • Raises Optic Higher
  • Quick Release Mount

This Alloy constructed mount from Aim-O is designed for use with T1/T2 style Optics which are often mounted on a high-rise base. This makes it much easier to aim down your sight if you use Lower Face Protection, whereas some people just find an optic easier to use when it sits higher on the rail. A Quick Release Mount makes for easy installation to 20mm RIS/RAS, which you can find on just about any Airsoft Gun. The Locking Lever on the side of the unit means that the mount can't be accidentally removed during action.

22.99
  • For Scout light 300/600 series
  • Works with both KeyMod and M-LOK
  • Aluminium construction

The Offset Light mount from WADSN provides an extended mounting solution for the 300/600 series of scout lights. The mount will place your light at 45 degrees to the rail system, keeping your light out of the way and allowing a more comfortable grip, in an extended position which makes it perfect for use with a suppressor or shorter rail systems.

23.99
  • Cantilever Style
  • Aluminium Alloy
  • For 30mm Tubes

An Aluminium Alloy constructed Cantilever mount for 30mm Scopes, which easily mounts onto 20mm RIS/RAS Rail Systems. It offers two connection points with four securing screws in each mount. The base of the mount attaches to 20mm rails by unscrewing the securing nuts, placing onto the rail and re-tightening.

23.99
  • Micro RDS mount for SC-016
  • Fits SC-015 rifle scope
  • CNC Aluminium construction

This red dot sight mount plate is compatible with the Ares SC-016 micro red dot sight and allows it to be mounted above the Ares SC-015 rifle scope in a "piggyback" manner. The plate is constructed from CNC machined aluminium and includes two mounting bolts and an Allen key.

26.49
  • 6 Bolt Securing
  • 30mm Diameter Tubing
  • 20mm RIS/Picatiny Compatible 

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

26.49
  • High Profile Mounts
  • Raise Low Profile Scopes
  • Perfect For Full-Face Masks

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

26.49
  • 20mm Mounts
  • 1'' Scope Rings
  • 6061-T6 Aluminium

A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.

26.49
  • 20mm Mounts
  • 1'' Scope Rings
  • 6061-T6 Aluminium

A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.

26.49
  • 20mm Mounts
  • 1'' Scope Rings
  • 6061-T6 Aluminium

A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.

29.99
  • Optic Riser
  • For RDS / HOLO
  • UNITY Tactical Licensing

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

35.99
  • Aluminium construction
  • Fits RMR/T1/T2 red dot sights
  • Canted optic mount for WADSN LPVO mount

If you want to shoot while you shoot, we suggest a sight mounted to your sight! The WADSN LPVO Mount Offset Optic Base is designed to mount to the WADSN LPVO 30mm Scope Mount and provide an instantly accessible red dot sight. This mount base is compatible with RMR, T1 and T2 style sights, and may also fit others. The mount is constructed from aluminium with steel screws, and comes with an Allen key and a Torx key so you don't have to rummage in your toolbox! 

About Our Airsoft Mounts

From sling mounts to sight mounts and everything in between, at Patrol Base, we have a range of mounts designed to allow the attachment of different accessories where it may not have been previously possible. That means you can create the custom airsoft gun you’ve been dreaming about, whether you need something to attach your new reflex sight to your airsoft pistol or something compact and tactical, ideal for avid skirmishers that want to stay light on equipment. Most attach easily to our KeyMod and MLOK airsoft rails.