Refine results
Refine by
Viewing 30 of 51.
grid
list
From 111.49
  • Full metal construction
  • US Army M24 SWS replica
  • 500 FPS on 0.2g BBs - Hits hard!

If you have your sights set on a sniper rifle but want something with a more militant look, the CM.702B M24 from CYMA is exactly what you need. This spring bolt action sniper rifle is based on the real steel M24 SWS, the US Army's standard sniper rifle and comes equipped with a 6.03mm tightbore inner barrel straight out of the box!

As far as affordable sniper rifles go, this is one of the most consistent we have seen, hovering around the 500 FPS mark on 0.2g BBs with only a couple of FPS deviation between shots. While it isn't based on the VSR-10 system, it is compatible with upgrade parts for the Classic Army CA/M24 but for all but the most particular snipers, upgrades shouldn't be necessary. Just slap a scope on top and get busy from your hide in the woods!

From 116.99
  • Full metal construction
  • 6.03mm Tightbore inner barrel
  • Tokyo Marui VSR-10 Pro clone

If you are looking for a cheap base gun for your dream sniper rifle build, this is ideal! The CYMA CM.701 Spring Bolt Action Sniper rifle is based on the popular R700 series of real steel bolt action rifles on the outside and is a clone of the Tokyo Marui VSR-10 Pro on the inside. The outer barrel and receiver are constructed from alloy and the stock is textured high density polymer, matching the metal proportions of the real thing perfectly.

On the inside, CYMA has generously added a 6.03mm tightbore inner barrel into the mix for improvements in accuracy and a slight FPS boost. Also present is a far stronger spring than in the Tokyo Marui version, the result of which is 500 FPS straight out of the box on a 0.2g BB. If you are building a beast of a sniper rifle, this would be a great start, just don't forget you will need an aftermarket 20mm Picatinny rail if you want to mount a scope!

From 140.49
Was 186.99
Save 46.50
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

From 140.49
Was 186.99
Save 46.50
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

From 140.49
Was 186.99
Save 46.50
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

140.49
Was 186.99
Save 46.50
  • Easy To Work Bolt
  • Lightweight & Tough
  • Scope & Bipod Included

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

From 292.49
  • Rear Wired
  • Dovetail Side Rail
  • Integrated Suppressor

The CYMA CM.099 is a faithful replica of the infamous VSS Vintorez Sniper Rifle, a specialist Russian DMR from the AS VAL family that fires the specially-made 9x39mm. This Airsoft Electric Gun replica ticks all the right boxes for a VSS replica, including a rear-wired Stock which makes battery installation much easier than other VSS models.

From 338.99
  • 6.01mm tightbore barrel
  • Incredibly accurate
  • 20mm Picatinny receiver rail
If you want to meet the man behind the Novritsch YouTube channel and the fantastic Novritsch Airsoft gun range, now is your chance! See our blog for more information.

Bringing Novritsch's player and industry expertise to the Airsoft sniping world in the form of the SSG10 A1, a VSR platform decked out to the nines. Sporting a 6.01 precision tightbore barrel for pinpoint accuracy and a satisfying pop with every shot, this sniper is crafted to perfection, with a suave alloy fluted outer barrel and superbly textured lightweight polymer body, finished with a comfortable rubberised butt plate for a sniper that shoots and handles like an absolute dream.

From 444.49
  • Full metal construction
  • Lightweight DMR style 10 / 22 replica
  • Snappy gas blowback action
If you want to meet the man behind the Novritsch YouTube channel and the fantastic Novritsch Airsoft gun range, now is your chance! See our blog for more information.

In the real steel world, the 10/22 rifle platform is probably the last weapon anyone would choose to take into combat, but in the Airsoft world, you would be hard-pressed to find a more practical GBBR than the Novritsch SSQ22! This modernised Ruger 10/22 style replica puts performance first while providing the exciting blowback and realistic mag capacity GBBR enjoyers will appreciate.

On the outside, Novritsch has been up to his usual tricks, decking the SSQ22 out with an M-LOK handguard, lengthened 20mm Picatinny receiver rail and the up-and-coming 1913/20mm Picatinny stock mounting interface featured on the Sig MPX and MCX, amongst others. On the inside, the heart of the SSQ22's setup is its Maple Leaf flat HOP-up rubber which helps stabilise the BB in flight and ensures it enters the barrel precisely centred for more consistent shots down range. If you are thinking about giving the DMR playstyle a go but don't fancy running a 5KG SR25 setup the SSQ22 is the lightweight DMR platform you have been waiting for!

From 444.49
  • Full metal construction
  • 6.01mm Tightbore inner barrel
  • Luxurious ergonomic stock/chassis
If you want to meet the man behind the Novritsch YouTube channel and the fantastic Novritsch Airsoft gun range, now is your chance! See our blog for more information.

Those looking for a more ergonomic alternative to the standard VSR/BAR-10 shape, the SSG10 A2 from Novritsch is what you need. Based on the SSG10 A1 with its full complement of upgraded internal parts, the A2 adds a gorgeous ergonomic chassis styled similarly to the real steel MacMillan A4 stock with some unique Novritsch twists.

All the best parts of the original SSG10 are present in the A2 version, including a plethora of CNC-machined aluminium and steel parts, a 6.01mm tightbore inner barrel and Maple Leaf 60-degree HOP-up rubber, offering near-flawless performance straight out of the box. If you want to get sniping with a highly ergonomic platform which is pre-upgraded to the nines, the SSG10 A2 will be an asset to you!

From 490.99
  • Light trigger pull
  • Integrated Bipod
  • Ultimate Scout Sniper rifle

Another extremely well-equipped pre-upgraded sniper rifle hits the market, but this one is different. The ASG Steyr Mannlicher Scout rifle is based on the real-world design, the brainchild of legendary rifle designer Jeff Cooper. This rifle provides everything you need to snipe with the utmost efficiency. An unusual looking beast, the Steyr Scout is designed by the best, and I have to say, the Airsoft version lives up to my every expectation of this phenomenal platform...

From 549.49
Was 642.99
Save 93.50
  • Full metal construction
  • Licenced by SAKO via ASG
  • Dial adjustable HOP-up with left-to-right tuning!

The ASG SAKO TRG M10 follows the ASG tradition of offering high end Airsoft sniper rifles with full real steel licencing as an alternative to the lightweight and skirmish focussed VSR style platforms. Equally at home in the hands of a sniper as it is in the collection of a skirmisher who values realism, this SAKO TRG M10 replica boasts full metal construction, a whopping 610mm long 6.03mm tightbore inner barrel and a unique dial adjustable HOP-up with a secondary screw to adjust the HOP-up from left to right!

The unique HOP-up system is just the tip of the iceberg when it comes to the innovative features of the ASG SAKO TRG M10 which benefits greatly from being based on a unique high end real steel precision rifle. As one would expect, the TRG has a CNC machined free-floated handguard, fluted outer barrel, ergonomic pistol grip and well designed ambidextrous controls, but what you might not expect is the functional loaded chamber indicator and fully adjustable trigger, bringing much sought-after real steel features into the Airsoft world. If you are a sniper with a desire to skirmish a highly realistic and fully licenced platform this is one of the best we have seen yet!

From 596.49
Was 642.99
Save 46.50
  • Full metal construction
  • Licenced by SAKO via ASG
  • Dial adjustable HOP-up with left-to-right tuning!

The ASG SAKO TRG M10 follows the ASG tradition of offering high end Airsoft sniper rifles with full real steel licencing as an alternative to the lightweight and skirmish focussed VSR style platforms. Equally at home in the hands of a sniper as it is in the collection of a skirmisher who values realism, this SAKO TRG M10 replica boasts full metal construction, a whopping 610mm long 6.03mm tightbore inner barrel and a unique dial adjustable HOP-up with a secondary screw to adjust the HOP-up from left to right!

The unique HOP-up system is just the tip of the iceberg when it comes to the innovative features of the ASG SAKO TRG M10 which benefits greatly from being based on a unique high end real steel precision rifle. As one would expect, the TRG has a CNC machined free-floated handguard, fluted outer barrel, ergonomic pistol grip and well designed ambidextrous controls, but what you might not expect is the functional loaded chamber indicator and fully adjustable trigger, bringing much sought-after real steel features into the Airsoft world. If you are a sniper with a desire to skirmish a highly realistic and fully licenced platform this is one of the best we have seen yet!

From 616.24
Was 724.99
Save 108.75
  • Full metal and real wood construction
  • WWII Lee Enfield No.4 MK.I* Rifle
  • Supplied in a hard storage case

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

From 93.49
  • Spring Bolt Action
  • Straight Easy Bolt Pull
  • Lightweight Textured Stock

A high quality Airsoft replica of the Steyr SSG sniper rifle, consisting of a lightweight polymer Stock with alloy bolt, barrel and receiver, complete with an accurately recreated straight pull bolt.

From 105.49
  • Gas powered
  • Skeleton stock
  • Incredibly lightweight

A great rifle for those of you looking to start a sniper loadout or if you are looking to get into Airsoft in general

An excellent long range weapon for both woodland and urban situations. An incredibly fun and tactical piece of equipment, the MK1 combines the comfortable grip of a stocked pistol carbine, with the range and barrel of sniper sniper rifle.

From 140.49
  • Full metal construction
  • Polymer or Real wood variants
  • 6.02mm Tightbore inner barrel

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

151.99
  • 20mm top rail
  • Full metal barrel and furnishings
  • Pre Two-Tone blue

Based on the highly successful and widely compatible VSR-10 model, Snow Wolf brings us a new entry in their sniper line-up. With full metal barrel and lightweight polymer body, this VSR has an even and balanced weight to aid in manoeuvring and lining up shots.

An advantage of this variant is that it comes pre-painted in two-tone blue straight from the factory, so there's no waiting for a paint job to be completed, but best of all - No UKARA required for purchasing! So all you aspiring snipers can get skirmishing right away and begin your journey as an Airsoft sniper!

From 151.99
  • Spring bolt action
  • Fluted outer barrel
  • Adjustable stock length

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

From 163.99
  • Full Metal construction
  • Polymer stock and handguard
  • Approximately 498 FPS out of the box!

A great quality straight pull spring bolt action SVD sniper rifle, the AGM SVD-M is constructed entirely from alloys everywhere the real SVD is! This thing shoots very hot to boot, so make sure you check with your local site before taking this bad boy to a skirmish!

From 163.99
  • Full metal construction
  • Spiral fluted outer barrel
  • SV-98 Style chassis with takedown stock

If you are looking for a bolt action sniper rifle without the plain looks of the VSR-10 platform, Well's MB series offers a plethora of bolt action options with a look to suit any loadout or personal taste. The MB4420 is the latest in this line, styled after the Russian SV-98 sniper rifle with an L96 type receiver, sporting an enlarged bolt handle, ergonomic safety catch and gorgeous spiral fluted outer barrel to add some custom flair. The set includes the SV-98 style fully adjustable stock which can be quickly broken down into two pieces for easier transport and storage, sports full adjustment for optimum shooter comfort and ergonomics, and includes the carry handle mounting bolts, and carry handle, giving the SV-98 its distinct silhouette.

From 163.99
  • Full metal construction
  • 6.03mm Tightbore inner barrel
  • Faux wood ABS stock - Agile & light!

Whether you are looking for a cheap route into historical reenactment or a sniper rifle with more classic styling, the S&T M1903A3 Springfield ABS Stock Version was made with you in mind. This spring-powered bolt action rifle replica boasts full metal construction, VSR-10-based internals and a lightweight faux wood ABS polymer stock, reducing weight and allowing you to use this Springfield as you would a VSR-10; with no guilt about getting it dirty and dinged up.

For those who must have an optic, a scope mount is available, and those who need upgrades will be happy to learn that almost any part you would need to upgrade on the Springfield is compatible with VSR-10 parts. As it comes, we are treated to a 6.03mm tightbore measuring an epic 518mm in overall length, giving the Springfield an accuracy edge straight out of the box. As an alternative to the VSR-10 for a sniper rifle build or shell ejecting rifles for reenactment, the S&T Springfield ABS stock version perfectly marries the classic look with skirmishable practicality!

From 175.49
  • Full metal construction
  • Polymer or Real wood variants
  • 6.02mm Tightbore inner barrel

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

From 198.99
  • Spring Bolt Action
  • Fluted Outer Barrel
  • Adjustable Rear Monopod

A spring powered, Airsoft 6mm BB bolt action sniper rifle, based on the iconic L96 platform used by the many military and police forces around the world, including the British Army. This variant features a side folding stock and a fluted outer barrel.

From 222.49
  • Modern chassis
  • Adjustable stock and cheek rest
  • 20mm Picatinny railed receiver

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

257.49
Was 397.49
Save 140.00
  • Full metal construction
  • TM L96/M40 system
  • 7.5 inch top rail

If you want a Russian sniper rifle forget the Dragunov, you want an SV98! The Snow Wolf SV98 Spring Bolt Action Sniper Rifle is a great example, complete with real-world accurate furniture with a 7.5 inch top rail to add your choice of sight / scope.

The Snow Wolf SV98 shoots at a respectable 410FPS +/- 10% straight out of the box and uses the Tokyo Marui L96/M40 feed system. This means the magazine is exactly where it should be and the HOP-up dial is centrally positioned on the bottom of the stock, offering a wide range of adjustment with audible and tactile clicks. This allows you to add small increments of HOP-up effect easily mid game.

This variant comes pre two toned, so for all you beginner Airsofters looking to get into sniping, you can purchase this without a need for UKARA! And with it being pre two toned at the factory there's no wait time for it to get sprayed, so you can get in the field ASAP!

From 280.99
  • Spring bolt action
  • Fluted outer barrel
  • Scope and bipod included

As seen in the immensely popular Battlefield game series, this is often the go-to rifle for aspiring snipers, as its easy to pick up and start picking off targets. This variant features a fluted barrel and fires at roughly 345 FPS, for a lightweight easy to cock spring for quick follow up shots.

Based on the M24 platform, this is spring powered bolt action design with a lengthy precise adjustable buttstock, a great value Airsoft sniper for those of you looking to start your sniper loadout, or find yourself playing more field skirmishes.

From 292.49
  • Full metal construction
  • Paratrooper/Mechanised infantry SVD variant
  • Based on the Real Sword Dragunov SVD

If you like the iconic Dragunov SVD but you don't want a rifle a mile long, the SVD-S should suit your preferences! The CM.057S Dragunov SVD-S is constructed entirely from metal with a large proportion of steel parts and is a perfect replica of the SVD variant issued to Russian paratroopers and mechanised infantrymen, the SVD-S. The SVD-S has a shorter barrel and muzzle device than the original, and also has a pistol grip and folding stock at the rear instead of the SVD thumbhole stock. This is a Dragunov for the Airsoft marksman on the move!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 590mm inner barrel to make the SVD-S a great base platform for a DMR build. If you are after a long-range platform and want something with a folding stock for better portability, the SVD-S is the right tool for the job!

315.99
  • Full metal construction
  • Full Barrett Trademarks - Licenced by EMG
  • Includes bipod & carry handle

If you have been keeping your eyes open for a high-quality Barrett replica you aren't the only one, but thankfully we now have one! The EMG Barrett M82A1 is officially licenced by Barrett Firearms through EMG and has immaculately engraved trademarks as we would expect, and is constructed entirely from metal save for the massive muzzle brake.

EMG's Barrett is sure to be tough to skirmish with, weighing in at an epic 5.5KG fully equipped and being 1.42m in length, but if you like a challenge you have a rotary adjustable HOP-up unit at your disposal and 400FPS straight out of the box with a remarkably light bolt pull. If you want to be able to say "mine is bigger than yours" with absolute certainty, nothing will do it like a Barrett Light Fifty!

338.99
Was 490.99
Save 152.00
  • Full metal construction
  • TM L96/M40 system
  • Scope, scope rings and bipod included


If you want a Russian sniper rifle forget the Dragunov, you want an SV98! The Snow Wolf SV98 Spring Bolt Action Sniper Rifle is a great example, complete with real-world accurate furniture and a scope, scope rings and a bipod to complete the look.

The Snow Wolf SV98 shoots at a respectable 410FPS +/- 10% straight out of the box and uses the Tokyo Marui L96/M40 feed system, meaning the magazine is exactly where it should be and the HOP-up dial is centrally positioned on the bottom of the stock, offering a wide range of adjustment with audible and tactile clicks so you can add small increments of HOP-up effect easily mid game. Whether you have a sniper rifle collection, a Russian loadout or a hole in your soul the shape of an SV98, this would make a great addition to your arsenal!

About Our Airsoft Sniper Rifles

Add the ultimate Airsoft sniper rifle to your offensive on the battlefield and show your enemies that you’re in control. We have a wide range of Airsoft snipers to choose from, so you can tailor your weapon to your exact fighting needs. 

From lightweight rifles, to spring bolt action and two stage trigger variants, you’ll find an attractive range of features to choose from, helping you to make the biggest impact on the range. 

With extensive upgrade options available, as well as rifles which accept Co2 conversion, you’re guaranteed to find a rifle that is as versatile as your combat style. You’ll even find all the Airsoft ammo and supplies you need, from CO2 gas to bio BBs.

Transform your battle presence by adding a new Airsoft sniper rifle to your collection from Patrol Base. We ensure that our customers get the best value for their money, so we’ll always provide our price match promise on our products.

Shop sniper rifles online now at Patrol Base and take a look at our entire range from the exhilarating Airsoft M24 sniper rifle to the famed VSR/Bar-10.