Refine results
Refine by
Viewing 30 of 67.
grid
list
70.49
  • 210rnd Capacity 
  • High density polymer construction
  • Licenced by Troy Industries via EMG


If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

From 350.99
Was 409.49
Save 58.50
  • Full metal construction
  • Automatic tri-shot shotgun
  • Triple wheel adjustable HOP-up system

If you have been looking for the meanest AEG for CQB skirmishes, you have definitely stumbled across it in the CYMA CM.102 SGR-12! This automatic electric shotgun is a close copy of the original Tokyo Marui design and boasts full metal construction to go with its ferocious in-skirmish firepower. This shotgun is capable of both semi and fully automatic fire, with each cycle of the custom gearbox firing 3 BBs down range from 3 independent inner barrels, each with its own HOP-up adjuster. If you have ever dreamt of using a tri-shot shotgun which doesn't require pumping before each shot, now you can!

From 397.49
  • Full metal construction
  • Licenced by Daniel Defense via EMG
  • MOSFET, Tightbore & E-Edition gearbox

If you're into the latest high-end American rifles, the EMG Daniel Defense M4A1 RIII™ 14.5" should be right up your street. This full metal M4/AR-15 AEG is based on the carbine length option in the Daniel Defense RIII™ line and is a near-perfect match for the real thing. On the outside, we are treated to a perfectly replicated M4A1 RIS III M-LOK  handguard, DD Tornado pistol grip, Grip-N-Rip charging handle and the latest DD Buttstock, along with flawlessly engraved Daniel Defense trademarks.

The M4A1 RIII™ is built around a reinforced version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor, resulting in a very impressive rate of fire and a near-instantaneous trigger response. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, giving you the right core parts to get the job done at long range.

As a platform for outdoors skirmishing or Airsofters who find themselves in a mixed environment, the DD M4A1 RIII™ is a fantastic choice. With a longer barrel than the average coupled with a lightweight and agile M-LOK front end, the M4A1 RIII™ can tackle the enemy team at range and still be whipped around at break-neck speed when clearing rooms!

From 409.49
  • Full metal construction
  • Licenced by Daniel Defense via EMG
  • MOSFET, tightbore barrel, E-Edition gearbox

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

From 409.49
  • Full metal construction
  • Licenced by Daniel Defense via EMG
  • MOSFET, tightbore barrel, E-Edition gearbox

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

From 420.99
  • Full metal construction
  • 6.03mm Tightbore & MOSFET
  • Licenced by Daniel Defense via EMG

If you're loving the latest and greatest Daniel Defense releases but are looking for a CQB platform, here you go! The EMG Daniel Defense DDM4® PDW SBR AEG is a full metal PDW style M4/AR-15 AEG boasting licenced trademarks, flawless replica DD furniture and the absolutely ferocious internals CYMA Platinum AEGs are renowned for.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings, a great replica of the DD "Tornado" pistol grip and a compact PDW sliding stock. Inside the box, you're even treated to a battery extension unit, allowing for normal buffer tube batteries to fit into this micro AR.

Inside, things get even better! Built around a version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor; the DDM4 PDW is a serious CQB menace and an asset to fast-moving outdoor skirmishers!

From 420.99
  • Full metal construction
  • 6.03mm Tightbore & MOSFET
  • Licenced by Daniel Defense via EMG

If you're loving the latest and greatest Daniel Defense releases but are looking for a CQB platform, here you go! The EMG Daniel Defense DDM4® PDW SBR AEG is a full metal PDW style M4/AR-15 AEG boasting licenced trademarks, flawless replica DD furniture and the absolutely ferocious internals CYMA Platinum AEGs are renowned for.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings, a great replica of the DD "Tornado" pistol grip and a compact PDW sliding stock. Inside the box, you're even treated to a battery extension unit, allowing for normal buffer tube batteries to fit into this micro AR.

Inside, things get even better! Built around a version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor; the DDM4 PDW is a serious CQB menace and an asset to fast-moving outdoor skirmishers!

From 420.99
  • Full metal construction
  • Licenced by Daniel Defense via EMG
  • MOSFET, Tightbore & E-Edition gearbox

If you're into the latest high-end American rifles, the EMG Daniel Defense M4A1 RIII™ 14.5" should be right up your street. This full metal M4/AR-15 AEG is based on the carbine length option in the Daniel Defense RIII™ line and is a near-perfect match for the real thing. On the outside, we are treated to a perfectly replicated M4A1 RIS III M-LOK  handguard, DD Tornado pistol grip, Grip-N-Rip charging handle and the latest DD Buttstock, along with flawlessly engraved Daniel Defense trademarks.

The M4A1 RIII™ is built around a reinforced version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor, resulting in a very impressive rate of fire and a near-instantaneous trigger response. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, giving you the right core parts to get the job done at long range.

As a platform for outdoors skirmishing or Airsofters who find themselves in a mixed environment, the DD M4A1 RIII™ is a fantastic choice. With a longer barrel than the average coupled with a lightweight and agile M-LOK front end, the M4A1 RIII™ can tackle the enemy team at range and still be whipped around at break-neck speed when clearing rooms!

From 502.99
  • Barrett Licensed
  • Nautilus Gearbox
  • Ambi. Fire Selector

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

From 502.99
  • Barrett Licensed
  • Nautilus Gearbox
  • Ambi. Fire Selector

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

From 525.99
  • Full metal construction
  • Licenced by Troy Industries
  • MOSFET & 6.03mm Tightbore pre-installed

If you are looking for a lightning-fast PDW which marries superb build quality and impressive internals with licenced trademarks, check out the EMG TROY SOCC PDW M4/AR-15 AEG! This compact, full-metal AR platform boasts full licenced trademarks from Troy Industries and a slick modern design at the cutting edge of ergonomics. 

The handguard is a fantastic replica of the real steel Troy 7.6" M-LOK handguard, the muzzle device is a dead-on match for the hyper-aggressive Troy Medieval Flash Suppressor and the stock is based on the real steel SB Tactical SBA3 Brace but with a rubber butt plate so it can be shouldered like a proper stock. Those who like the latest civilian tactical platforms from the real steel world are going to love this!

On the inside, things are equally impressive, boasting a pre-upgraded version 2 gearbox fitted with 8mm bushings, a polymer piston with a full steel tooth rack, steel ball-bearing spring guide and an in-line MOSFET to improve trigger response, electrical efficiency and trigger contact lifespan. If a compact AR is on the cards for your next purchase and you like the elite real steel look, the TROY SOCC PDW should suit you perfectly!

From 607.99
  • Fully Licenced by FN Herstal
  • Krytac in-line MOSFET pre-installed
  • Alpine Limited Edition - New colour & new upper receiver!


    Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

    Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

    From 642.99
    • Full metal construction
    • TM ZET System clone - Made by CGS
    • Licenced Noveske trademarks from EMG

    Yet another officially licenced Noveske GBBR from EMG, aren't we lucky! This is the CGS Version of the Noveske 10.5" Gen.3 Shorty 300BLK GBBR, manufactured by CYMA's GBBR wing, known as CGS (CYMA Gas System). Based on the TM ZET System internally but with loads of steel internal parts thrown in, this is one of the best GBBR buys out there currently, and that is unlikely to change!

    Being based on a TM design, this thing will shoot like a beast, and on the outside, things are even more spectacular. Boasting licenced Noveske Rifleworks trademarks across the design, full metal construction and flawless attention to detail make the CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR the ideal primary for any skirmisher who likes the challenge of running a GBBR in game and appreciates the high levels of authenticity and realism EMG provides. Whether this will add to your GBBR collection or you have decided it is time to move up to the most challenging yet rewarding platform in Airsoft, the EMG CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR will see you well equipped!

    From 642.99
    • Full metal construction
    • TM ZET System clone - Made by CGS
    • Licenced Noveske trademarks from EMG

    Yet another officially licenced Noveske GBBR from EMG, aren't we lucky! This is the CGS Version of the Noveske 10.5" Gen.3 Shorty 300BLK GBBR, manufactured by CYMA's GBBR wing, known as CGS (CYMA Gas System). Based on the TM ZET System internally but with loads of steel internal parts thrown in, this is one of the best GBBR buys out there currently, and that is unlikely to change!

    Being based on a TM design, this thing will shoot like a beast, and on the outside, things are even more spectacular. Boasting licenced Noveske Rifleworks trademarks across the design, full metal construction and flawless attention to detail make the CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR the ideal primary for any skirmisher who likes the challenge of running a GBBR in game and appreciates the high levels of authenticity and realism EMG provides. Whether this will add to your GBBR collection or you have decided it is time to move up to the most challenging yet rewarding platform in Airsoft, the EMG CGS Noveske 10.5" Gen.3 Shorty 300BLK GBBR will see you well equipped!

    From 642.99
    • Full metal construction
    • TM ZET System clone - Made by CGS
    • Licenced Daniel Defense trademarks from EMG

    If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

    The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

    From 642.99
    • Full metal construction
    • TM ZET System clone - Made by CGS
    • Licenced Daniel Defense trademarks from EMG

    If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

    The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

    From 701.49
    • Full metal construction
    • TM ZET System clone - Made by CGS
    • Licenced Daniel Defense trademarks from EMG

    If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

    Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

    If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

    From 701.49
    • Full metal construction
    • TM ZET System clone - Made by CGS
    • Licenced Daniel Defense trademarks from EMG

    If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

    Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

    If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

    19.99
    • Lancer Systems trademarks
    • Advanced raised grip textures
    • 190 round mid-cap

    EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

    • '.300 BLACKOUT'
    • 'L5-AWA'
    • 30BLK
    • LANCER SYSTEMS
    • 20 / 30

    The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

    40.99
    • 23rnd Capacity
    • Alloy shell with polymer baseplate
    • SAI Enhanced mag for BLU/EU Series

    If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

    The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

    46.99
    • 20 round capacity
    • Green gas powered
    • For Archon Firearms Type B

    If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

    The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

    From 128.99
    • Full metal construction
    • MOSFET pre-installed
    • Licenced by Salient Arms though EMG

    If you have decided to get an AEP for those frosty days where GBBs simply won't work but you have a taste for the finer things in life the CYMA EMG CM.135S Salient Arms BLU AEP would suit you perfectly! This AEP is manufactured by CYMA and licenced by Salient Arms through EMG, and boasts full metal construction and a pre-installed MOSFET to give it an impressive trigger response and rate of fire. 

    While the slide doesn't cycle, this AEP is no slouch, being equipped with most of the ergonomic upgrades that make the Gas Blowback SAI BLU such a pleasure to shoot and a highly visible red light-enhancing front iron sight paired with an anti-glare rear sight for fast target acquisition. The BLU also has a 14mm CCW male threaded outer barrel protected with the classic Salient Arms style thread protector, meaning, unlike most AEPs, this one is ready for a tracer unit right away! If the plain jane looks of most AEPs have put you off, this stylish and cutting-edge design should seal the deal! 

    From 210.49
    • Ultra-low Bore-axis
    • CNC Machined Aluminium Slide
    • Fully Licensed by Archon™ Firearms 

    Looking for a pistol to match your space-gun? Want a sidearm that feels as good in the hand as it shoots? The Archon™ Type B pistol from EMG has everything you would expect from a training-grade pistol. The real world Archon™ Type B was designed with specs coming directly from active duty US service personnel who had found current striker-fired pistols offered to be inadequate for their needs. This EMG Gas blowback is absolutely faithful to this, the ergonomic attributes of this pistol are basically unparalleled. 

    From 210.49
    • Full metal construction
    • 6.05mm Tightbore inner barrel
    • Optics ready, threaded barrel with thread adapter

    If you are looking for a compact GBB pistol with all the trimmings and a unique race gun look, the F1 Firerarms BSF-19B from EMG is definitely your style. This GBB pistol is based on the internal design of the EU series and is sized to match the EU19, making it great for carrying on a crowded belt setup and quicker to draw thanks to its shorter barrel and slide.

    Unlike an EU19, the frame of the BSF-19B is constructed from aluminium with machined texture on the front and rear and slick sides to allow for grip tape to be added, improving balance and providing the high quality feel one would expect from an Airsoft replica of a high end race gun. The slide and outer barrel are also aluminium, and the slide is furnished with stylish ports across the design with an optics-ready cutout at the rear; ready for an RMR footprint red dot sight to be mounted without the need for any extra plates or mounts.

    With a unique look, threaded barrel, optics-ready slide and a 20mm Picatinny frame rail, the F1 Firearms BSF-19B is perfect for those looking for a compact pistol ready to be fully decked out with all the mission essentials a modern sidearm requires to remain at the cutting edge!

    From 222.49
    • Ultra-low Bore-axis
    • CNC Machined Aluminium Slide
    • Fully Licensed by Archon™ Firearms 

    Looking for a pistol to match your space-gun? Want a sidearm that feels as good in the hand as it shoots? The Archon™ Type B pistol from EMG has everything you would expect from a training-grade pistol. The real world Archon™ Type B was designed with specs coming directly from active duty US service personnel who had found current striker-fired pistols offered to be inadequate for their needs. This EMG Gas blowback is absolutely faithful to this, the ergonomic attributes of this pistol are basically unparalleled. 

    From 233.99
    • Salient Arms Licenced
    • Full metal construction
    • Super tactical EU17 GBB

    If you ever thought the EU series was falling behind the Hi-capa platform as far as options are concerned, think again! Introducing the EMG SAI BLU, an enhanced EU17 pistol with all the bells and whistles! The SAI BLU sports a tactical slide with front and rear serrations, raised suppressor height sights, a threaded barrel with 14mm CCW adapter, and the ability to mount a red dot sight with any of the included 4 mounting plates!

    From 233.99
    • Full metal construction
    • Licensed CANiK trademarks 
    • 14mm CCW male threaded outer barrel

    If you are having a tough time deciding between all the modern handgun designs out there, and you aren't sure whether to go for a PPQ, M&P or Glock, now you no longer need to decide! The CANiK TP9 is a very recent handgun designed in Turkey and manufactured in the USA which takes the things people love about other platforms and combines them to make one of the most ergonomically pleasing pistols we have ever handled. To sweeten the deal, the Cyber Gun TP9 Elite Combat comes with a 14mm CCW male threaded outer barrel, a magazine well flare and a 20mm Picatinny frame rail, meaning the TP9 is ready for any battlefield role you have in mind! 

    From 257.49
    Was 268.99
    Save 11.50
    • Full metal construction
    • Licensed by Salient Arms
    • Optics ready slide & threaded barrel

    Specna Arms, in partnership with EMG, presents the Salient Arms BLU, a flawless replica of one of the poshest pistols on the tactical market! The BLU is effectively a fully upgraded EU series pistol, boasting an enhanced slide with aggressive serrations and optics-ready functionality, and an enhanced frame with all the ergonomic improvements the US civilian tactical community demands for an up-to-date sidearm.

    The BLU is full metal on the outside with all the Salient Arms fanciness you could ever need, including a threaded outer barrel finished in rose gold, a magazine well flare for faster reloads and the iconic SAI flat trigger for speedy double taps. Included in the box you will find a set of suppressor height iron sights with light-enhancing inserts and 4 red dot sight mounting plates, allowing all manner of optical sights to be mounted in line with the most up-to-date handgun shooting techniques. No need to built your own Salient pistol, Specna has done it for you!

    From 303.99
    • Full metal construction
    • Licenced by TTI
    • 6.03mm Tightbore inner barrel

    If you are a John Wick fan or you appreciate a well built fully licenced enhanced EU34, the EMG Taran Tactical Innovations JW2 EU34 Combat Master GBB should put a smile on your face. This pistol is based on the EU34 used by Baba Yaga himself in John Wick: Chapter 2 and boasts full metal construction, a 6.03mm tightbore inner barrel and the EMG OMEGA enhanced frame. 

    The OMEGA frame is based on real-world enhanced "Timberwolf" frames and boasts an extended beavertail at the rear to prevent slide bite, a 20mm Picatinny frame rail for a flashlight or laser, trigger guard undercuts for improved handling and aggressive stippling to keep the JW2 firmly in your grasp during rapid fire or bad weather conditions. Pairing this superbly designed frame with the slick TTI JW2 slide makes this pistol as gorgeous to look at as it is to handle, with a stylish combination of black and silver with dynamic swept-back slide serrations both at the front and rear. If a standard EU34 just doesn't do it for you anymore or you have a puppy to avenge, the JW2 Combat Master belongs in your holster! 

    315.99
    • Full metal construction
    • Full Barrett Trademarks - Licenced by EMG
    • Includes bipod & carry handle

    If you have been keeping your eyes open for a high-quality Barrett replica you aren't the only one, but thankfully we now have one! The EMG Barrett M82A1 is officially licenced by Barrett Firearms through EMG and has immaculately engraved trademarks as we would expect, and is constructed entirely from metal save for the massive muzzle brake.

    EMG's Barrett is sure to be tough to skirmish with, weighing in at an epic 5.5KG fully equipped and being 1.42m in length, but if you like a challenge you have a rotary adjustable HOP-up unit at your disposal and 400FPS straight out of the box with a remarkably light bolt pull. If you want to be able to say "mine is bigger than yours" with absolute certainty, nothing will do it like a Barrett Light Fifty!

    About EMG Airsoft

    EMG Airsoft, also known as Evike Manufacturing Group, is rapidly becoming one of the biggest names in producing high-quality licensed Airsoft equipment, focussing on both replicas and accessories. 

    EMG holds the license to produce replicas from Daniel Defense, Noveske, CANiK Firearms, Salient Arms, Seekins Precision, Archon Firearms, and many other iconic real steel designs, all of which are reproduced by EMG to an exceptional standard, complete with licensed trademarks, flawless build quality, and impressive performance. 

    This is achieved thanks to EMG's partnership with many existing high-end Airsoft manufacturers, guaranteeing that when you choose EMG not only will you get a flawless replica but also a skirmish dominator! If you want the perfect blend of realism and performance, equip yourself with EMG UK!