Gas Magazine Parts

If you've got broken Maten magazines, this should help! The PTS Syndicate Enhanced Feed Lips for EPM-LR GBB Magazine; Part [483] are made from strong high density polymer, made even stronger with their enhanced design intended to reduce weak points in the original EPM-LR GBBR magazine's feed lips, along with improving feeding reliability.

These feed lips are strictly for the .308-style EPM-LR GBBR magazine supplied with the PTS Syndicate Mega Arms MML .308 MATEN GBBR and won't work with 5.56-style EPM GBBR mag. If you've got a pile of Maten mags which need feed lips, treat them to PTS Syndicate Enhanced Feed Lips for EPM-LR GBB Magazine; Part [483]!

If you've got broken PTS EPM GBBR magazines, this will sort them out! The PTS Syndicate Enhanced Feed Lips for EPM GBB Magazine; Part [2] are made from strong high density polymer, made even stronger with their enhanced design intended to reduce weak points in the original EPM GBBR magazine's feed lips, along with improving feeding reliability.

These feed lips are compatible with PTS EPM GBBR magazines (KWA system) supplied with the Radian Model 1 and Mega Arms Maten MKM GBBRs, but won't work with other GBBR magazines. If your PTS GBBR is sitting out summer skirmishes due to broken feed lips, the PTS Syndicate Enhanced Feed Lips for EPM GBB Magazine; Part [2] will get it back out doing what it does best!

If you have dropped a mag mid game you probably have a set of broken feed lips, but fear not! The Army Armament Magazine Feed Lips for Hi-capa GBB is designed to replace the original feed lips of AA Hi-capa magazines whether they are cracked from an accidental drop or just getting a bit worn out.

A replacement bulb cap, which is used to secure CO2 Bulbs in the bottom of WE EU Magazines and P&M Series Pistol Magazine. The cap is constructed from alloy, and is finished black, and features a large Allen Key hole in the bottom.

A silicone rubber seal designed to fit on the bottom of your Hi Capa magazine internally, to replace old and work out seals and reduce leaks. With a properly fit and lubricated seal you should never experience a leak again, just ensure you coat the seal in silicone based lubricant prior to fitting it, and be gentle! These things may snap under too much tension.

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength.

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your Tokyo Marui EU17 GBB pistol. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide.

Fix up your old mags with Army Armament Magazine Followers! This teeny, tiny part tends to take its fair share of wear and tear during long-term use and is a great replacement to have on hand if you have plenty of Army Armament Hi-capa mags at your disposal.

This is a replacement original part designed for Army Armament Hi-capa, JW3, JW4, R504/604 and R608 magazines to name but a few, but may also work with other brands' mags, though we can't confirm this. If you are having feeding issues, replacing the follower is far cheaper than getting a new mag!

If your MK1 Pistol or Tactical Sniper has a leaky mag, this might solve it! The KJ Works Magazine Base Seal for MK1 NBB Pistol is a replacement original part for the ASG/KJW MK1, both the pistol and Tactical Sniper variants. This part replaces the magazine base seal and is the perfect part to have in the toolbox just in case!

Has your R29 magazine become damaged in some way, and a new base is exactly what you need? Well, lucky for you, this is exactly that! The Army Armament Replacement Baseplate for R29 GBB is a replacement part designed for R29 magazines but it should be compatible with other 1911 magazines that are Tokyo Marui clones. However, modification may be required and you should only undertake this modification if you are absolutely confident in your abilities.

It comes with the magazine base and gasket, it does not include a gas inlet valve. It is also recommended that you use silicone oil whilst installing to minimise the risk of damaging the seals.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

If you have a pile of leaky mags, now is the time to fix them up! The WADSN Gas Magazine O-ring Repair Set includes 10 O-rings of 7 different sizes, designed to replace the O-rings of the knocker valve and fill valve in most Airsoft gas magazines. The set is supplied in a clear polymer organiser case to keep everything neat and includes a set of polymer installation tweezers to make installation without damaging the O-rings considerably easier. If you have a lot of leaky mags gathering dust, this set is the key to giving them a new lease of life!

If you have a magazine which leaks from the fill valve, or your mag is a bit old and the valve has taken a hammering over the years, a replacement valve is the way to go. This Specna Arms valve replaces the fill valve in your magazine with a nice fresh one, complete with an O-ring to ensure there are no leaks! This valve will require a valve key to install.

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags.

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

If you have a broken magazine it's a real shame to have to bin it! Luckily Army Armament have released their 1911 magazine follower as a separate part, allowing you to repair your mag if you have had follower issues, or even replace a worn follower for more reliable feeding.

Similar to their real world counterparts, the Army Armament R32 Mag Base provides a tough, large exterior baseplate for quicker mag dumps & better grip on reloads, plus they just plain look cool!

Providing a GBB Magazine capacity extension, a protective baseplate & a modern aesthetic the R32 Base Extension is a no brainer for the modern firearm fanatic.

Although this comes with an attachment screw and rubber O-ring, please be aware that this base plate does not come with a valve.