Viewing 16 of 16.
grid
list
11.99
  • For Airsoft AEG
  • Great Spare Part
  • Wide Range of Powers

A replacement spring for your Airsoft AEG weapons.

11.99
  • For Airsoft AEG
  • Great Spare Part
  • Wide Range of Powers

A replacement spring for your Airsoft AEG weapons.

7.49
  • Includes Bucking
  • For Cold Weather
  • For Marui Style AEG

Will fit almost all Airsoft AEG on the market. The rubber is made from Silicon and features a 50 Degree Nub, applying a moderate amount of hop to BBs. 

21.49
  • Upgrade spring
  • 150 m/s - 492 FPS
  • For TM PSG-1 only

This Guarder upgrade spring is compatible with the Tokyo Marui PSG1 gearbox and provides approximately 150 m/s or 492 FPS muzzle velocity on a 0.2g BB. The spring is made from tempered Si-Cr alloy steel wire to provide the strength and resistance necessary.

11.99
  • Upgrade spring
  • 120 m/s - 393 FPS
  • For TM PSG-1 only

This Guarder upgrade spring is compatible with the Tokyo Marui PSG1 gearbox and provides approximately 120 m/s or 393 FPS muzzle velocity on a 0.2g BB. The spring is made from tempered Si-Cr alloy steel wire to provide the strength and resistance necessary.

5.99
  • O Type Fitting
  • Precise Cut Teeth
  • Friction Only Fitting

A replacement O type AEG motor pinion gear, intended as a spare, replacement or upgrade component. 

8.07
Was 9.49
Save 1.42
  • O-Ring Sealed
  • 20.09mm Long
  • Improved Air Seal

A replacement or upgrade air nozzle for Airsoft electric SMG-5Ks.

9.49
  • For Marui G3 AEGs
  • Replacement Standard Nozzle
  • High Quality Replacement Part

A replacement air nozzle intended for Tokyo Marui G3 based Airsoft Electric Guns constructed from polymer, an excellent spare part designed to replace damaged air nozzles with a durable replacement.

20.49
  • For Airsoft AEG
  • Great Spare Part
  • Wide Range of Powers

A replacement spring for your Airsoft AEG weapons.

22.49
  • For Airsoft AEG
  • Great Spare Part
  • Wide Range of Powers

A replacement spring for your Airsoft AEG weapons.

3.99
  • Polymer follower
  • Steel feed spring
  • For Hi-capa GBB magazines

If you need faster feeding for your Hi-capa mags or are repairing a worn-out mag, the Guarder Magazine Follower With Spring is what you need! This spring and follower set is designed for the Hi-capa GBB platform and replaces the original follower and feed spring inside the magazine. The spring itself is constructed from spring steel and the follower is constructed from fibre-reinforced polymer to give it a longer lifespan which is especially important in high rate of fire speed soft setups. 

23.99
  • For Marui M4 / M16
  • Small Amount of Flex
  • All Components Included

A high quality performance aftermarket hop up for Tokyo Marui Airsoft M4 / M16 series AEGs.

10.99
  • For Upgrades & Repairs
  • High Quality Component
  • Polycarbonate Construction

Another high quality Airsoft internal component from Guarder, this V2 compatible tappet plate is constructed from durable polycarbonate. 

3.99
  • Improved Airseal
  • Upgrade Component
  • Potential Efficiency Increase

Generally deemed as an upgraded rubber seal, you can expect to see an improvement in your pistols FPS and gas efficiency depending on the rest of your setup.

7.49
  • Includes Bucking
  • For Marui Style AEG
  • For M130-150 Spring

A replacement hop up rubber and bucking designed for m130-150 springs, but can also be used for low FPS builds with heavyweight BB. 

15.49
  • Aluminium
  • For Army/Marui
  • Improved Compression

An enhanced HOP Unit for Army Armament / Tokyo Marui branded M1911 platform Gas Blowback Replicas, which serves to improve compression and lift achieved from your BBs. It is constructed from Aluminium and comes supplied with the Chamber, HOP Army, Adjustment Wheel, Two Screws and a small O-Ring.

About Guarder Airsoft

Guarder Airsoft is well known for its quality upgrade internals. If you speak to anyone who has upgraded their Airsoft replica, you can almost guarantee that Guarder will come up somewhere in the parts list. With air nozzles, tappet plates, pinion gears, springs, HOP rubbers and units, you’ll find a wide range of performance-driven products to choose from. 

Increase range and BB flight stability with Guarder Airsoft’s fantastic range of HOP rubbers, with something to suit any kind of electric AEG or gas blowback (GBB). 

Improve air seal/consistency by installing one of their many air nozzles to suit most electric replicas, boost or decrease FPS (feet per second) with their wide range of springs, or grab some Guarder black gas to see massive improvements in recoil and cold weather performance.