Refine results
Refine by
Viewing 30 of 69.
grid
list
9.49
  • Replacement O-ring set
  • For Airsoft gas magazines
  • Fix up your old leaky mags!

If you have a pile of leaky mags, now is the time to fix them up! The WADSN Gas Magazine O-ring Repair Set includes 10 O-rings of 7 different sizes, designed to replace the O-rings of the knocker valve and fill valve in most Airsoft gas magazines. The set is supplied in a clear polymer organiser case to keep everything neat and includes a set of polymer installation tweezers to make installation without damaging the O-rings considerably easier. If you have a lot of leaky mags gathering dust, this set is the key to giving them a new lease of life!

10.99
  • Tidies and holds cables
  • Aluminium rail cover
  • For M-LOK rail system

Flash light cables dangling and snagging your sling? WADSN has got you and your cables covered! This is a rail cover for M-LOK rail system with a textured exterior for that bit of extra friction and grip. But the real use of this rail cover is that it has a number of recesses for which to run cables through, keeping them confined and tidy.

So if you find yourself with loose cables from tactical devices such as battery wiring, pressure switches and other cables, this is what you need to keep them out of the way and minimize snagging.

15.49
  • Picatinny side mount
  • Offset at 45 degrees
  • M-LOK attached

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

19.99
  • Rubber pressure switch
  • Attaches to Picatinny rail
  • M-LOK rail mount

WADSN are considered by many to be the gold standard in terms of torches and switches with this modbutton being no exception. The pressure switch is used for remote activation of a flashlight and is constructed from rubber for a tactile feel. The housing attaches easily to a Picatinny rail system, however if you would prefer to attach it to an M-LOK system, WADSN have fortunately included an adaptor, giving you that option.

22.49
  • Remote pressure switch
  • For tactical torches
  • Two button functionality

If you find yourself using your torch a lot you need a remote pressure switch and if you have one why not think about upgrading to a deluxe switch with two enlarged buttons?

Attached via a clip to your 20mm RIS rail, the buttons are rubber housed within a reinforced polymer shell for extra protection and control. An advantage of two buttons is that you can operate torches and PEQs at the same time independently.

The specifications include a 2.5mm PEQ jack and an SF Scout jack.

22.49
  • Dual pressure switch - Controls light & laser
  • SF & 3.5mm PEQ/DBAL jack version
  • Fits 20mm Picatinny & M-LOK rails

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a 3.5mm jack through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!

29.49
  • Control for PEQ and SF scout light
  • Lock function - Prevents accidental discharges
  • Compatible with 20mm Picatinny rail, M-LOK and KeyMod

If you are running a PEQ15 or DBAL laser unit together with an SF style scout light, we have to say that's a nice setup! With the ever-growing popularity of running accessorised Airsoft rifles, WADSN has introduced a neat enhancement to combine the controls of a PEQ15 or DBAL with a 2.5mm jack and an SF scout style tactical flashlight with the standard SF plug. No longer do you have to have three hands to proficiently control your accessories, the Tactical Augmented Dual Function Tape Switch put the controls of both an SF scout style tactical flashlight and PEQ15 or DBAL (2.5mm jack) right at your fingertips, wherever you choose to place them. This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.

29.49
  • Dual pressure switch - Controls light & laser
  • SF & Crane (MAWL, OGL etc) jack version
  • Fits 20mm Picatinny & M-LOK rails

If you like flashlights and lasers but are short on rail space, the WADSN AXN Double Switch is here to save the day. This dual pressure switch allows you to operate your SF Scout style flashlight and a PEQ/DBAL style laser with a Crane jack (for MAWL & OGL replicas) through a single switch mounted to either a 20mm Picatinny rail or M-LOK slots. 

Dual switches are a great way to reduce your workload in game and streamline your setup for a more modern and professional look. The AXN type switch has the advantage of being far smaller than its rivals, making it ideal for a setup with limited rail space. Being set at a comfortable angle also reduces fatigue when compared to flat switch designs. If you have a load of shiny things on your primary, the difference a dual switch makes when it comes to ease of use cannot be overstated!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

40.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

42.49
  • Full metal construction
  • SF "Scout" style tactical flashlight - Short
  • Integrated 20mm Picatinny rail mount

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

42.49
  • Full metal construction
  • SF "Scout" style tactical flashlight - Short
  • Integrated 20mm Picatinny rail mount

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

46.99
  • IR and VIS modes
  • Polymer construction
  • Give your helmet the SF look!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

46.99
  • Navigation light - Read maps / intel in low light
  • Red / Blue / Green / White / IR L.E.Ds inside
  • Mounts to ARC rails, Helmet Velcro or MOLLE

If you need to see your way around a dark skirmish site or read a map during a night game without giving away your location, the Sidewinder Stalk Navigation light is the right tool for the job. This light provides soft light so you can navigate without lighting the whole site up and offers you the option of using red, blue, green or white light in 3 different intensity levels, as well as a flash mode for signalling.

Supplied with a mount for ARC rails, velcro and MOLLE, the WADSN Sidewinder can be mounted wherever you like and can be quickly removed and remounted should the need arise. If you are working on a helmet build and need some fancy bits to make it pop, the Sidewinder Stalk Helmet/MOLLE Navigation Light would be the perfect finishing touch!

52.99
  • 500 Lumens output
  • Integral 20mm Picatinny rail mount
  • Constant on push button tail cap

If you are in need of a compact tactical flashlight for a short-barreled rifle or SMG setup an M300 pattern light is one of the best options out there. This variant, the WADSN M300 Scout Tactical Flashlight w/Diffuser Cover uses an M300 light body coupled with a specialised head with a built-in diffuser cover which can be quickly flipped out of the way when not needed.

The diffuser is designed to spread the light throw out to more effectively distract and disorient enemy players when entering a room and flipping it aside will narrow the beam for long range engagements. Being based on an M300 scout light body means you can use alternative scout light mounts, tail caps and other scout light accessories to set it up to suit you perfectly.

64.49
  • Fibre-reinforced polymer construction
  • 220 Lumens output with Strobe
  • Integrated mount and pressure switch

If you are looking for a lightweight and compact tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

70.49
  • Fibre-reinforced polymer construction
  • 220 Lumens output with Strobe
  • Integrated mount and pressure switch

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

70.49
  • 150m maximum distance
  • 800 lumens
  • Aluminium build

A flashlight design for use with pistols, the X399YH-B is easily attached to your Picatinny pistol rail for if you want to transform your pistol into more of a spec ops style. The flashlight is features aluminium construction with fantastic and robust durability that will operate in even the harshest conditions.

It features 800 lumens on a low output with a potential for 150m maximum light distance, easily switched on/off using the rear rocker switch. The torch is powered by aftermarket 123A batteries.

75.99
  • Dual function tail cap
  • CRE2 LED bulb
  • Offset Picatinny mount

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.

105.49
  • Alloy construction
  • Remote pressure switch
  • Offset rail mount

For a more robust and thick lighting solution, the K-2P is for those of you with more Russian inclined loadouts. Constructed from full alloy, the torch shines at a brilliant 800 lumens and is powered by 2 x CR123A batteries.

The torch is easily attached to your AK rail or 20mm Picatinny system and includes a remote pressure switch, which again can be easily attached to a rail right out of the box. Another inclusion is the offset mount, which allows you to forward mount your torch on the bottom rail to avoid casting a shadow if you are using a suppressor.

151.99
  • Aluminium construction
  • QD mount for 20mm Picatinny rails
  • Flashlight only version: Low power, High power & strobe

If you want to add the elite look to your primary weapon but your local site bans lasers, the WADSN DBAL Mini style Tactical Flashlight was made with you in mind! This device is styled after the real steel DBAL Mini but instead of a laser, the device houses an ultra-bright tactical flashlight inside its front aperture.

The device offers several modes of operation, including low power mode for navigation and stroboscopic mode for distraction and disorientation, and mounts to your primary via a QD mount for 20mm Picatinny rails so you can easily switch between platforms without needing tools. The compact size of this unit makes it perfect for smaller SMGs and rifles, saving you rail space and offering similar functionality to a Scout tactical flashlight but with more modes to choose from and full compatibility with aftermarket 2.5mm pressure switches, dual pressure switches and hot buttons.

16.49
  • Picatinny side mount
  • Offset at 45 degrees
  • M-LOK attached

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

16.49
  • Dual switch for 3.5mm PEQ / DBAL & SF Scout light
  • Fits 20mm Picatinny, M-LOK or KeyMod
  • Streamline your setup!

If you are running a PEQ15 or DBAL laser unit with a 3.5mm pressure switch jack together with an SF style scout light, we have to say that's a nice setup! With the ever-growing popularity of running accessorised Airsoft rifles, WADSN has introduced a neat enhancement to combine the controls of a PEQ15, DBAL or OGL with a 3.5mm jack and an SF scout style tactical flashlight with the standard SF plug. The Tactical Augmented Pressure Switch from WADSN is the perfect thing to streamline your rifle setup and get things slick and organised!

No longer do you have to have three hands to proficiently control your accessories; the Tactical Augmented Dual Function Tape Switch puts the controls of both an SF scout style tactical flashlight and PEQ15 or DBAL (3.5mm jack) right at your fingertips, wherever you choose to place them. This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.

16.49
  • Dual switch for 3.5mm PEQ / DBAL & SF Scout light
  • Fits 20mm Picatinny, M-LOK or KeyMod
  • Streamline your setup!

If you are running a PEQ15 or DBAL laser unit with a 3.5mm pressure switch jack together with an SF style scout light, we have to say that's a nice setup! With the ever-growing popularity of running accessorised Airsoft rifles, WADSN has introduced a neat enhancement to combine the controls of a PEQ15, DBAL or OGL with a 3.5mm jack and an SF scout style tactical flashlight with the standard SF plug. The Tactical Augmented Pressure Switch from WADSN is the perfect thing to streamline your rifle setup and get things slick and organised!

No longer do you have to have three hands to proficiently control your accessories; the Tactical Augmented Dual Function Tape Switch puts the controls of both an SF scout style tactical flashlight and PEQ15 or DBAL (3.5mm jack) right at your fingertips, wherever you choose to place them. This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.

17.99
  • Picatinny side mount
  • Offset at 45 degrees
  • Picatinny M-LOK attached

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

22.49
  • Control for PEQ and SF scout light
  • A great way to streamline your rifle  
  • Compatible with 20mm Picatinny rail, M-LOK and KeyMod

If you are running a PEQ15 or DBAL laser unit together with an SF style scout light, we have to say that's a nice setup! With the ever-growing popularity of running accessorised Airsoft rifles, WADSN has introduced a neat enhancement to combine the controls of a PEQ15 or DBAL with a 2.5mm jack and an SF scout style tactical flashlight with the standard SF plug. No longer do you have to have three hands to proficiently control your accessories, the Tactical Augmented Dual Function Tape Switch put the controls of both an SF scout style tactical flashlight and PEQ15 or DBAL (2.5mm jack) right at your fingertips, wherever you choose to place them. This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.

22.49
  • Control for PEQ and SF scout light
  • A great way to streamline your rifle  
  • Compatible with 20mm Picatinny rail, M-LOK and KeyMod

If you are running a PEQ15 or DBAL laser unit together with an SF style scout light, we have to say that's a nice setup! With the ever-growing popularity of running accessorised Airsoft rifles, WADSN has introduced a neat enhancement to combine the controls of a PEQ15 or DBAL with a 2.5mm jack and an SF scout style tactical flashlight with the standard SF plug. No longer do you have to have three hands to proficiently control your accessories, the Tactical Augmented Dual Function Tape Switch put the controls of both an SF scout style tactical flashlight and PEQ15 or DBAL (2.5mm jack) right at your fingertips, wherever you choose to place them. This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.

About WADSN

WADSN is increasingly recognized and accepted by Airsoft players as a lighting and accessories brand of exceptional quality at a reasonable price. 

With its own R&D team, WADSN is constantly developing new product ranges to satisfy the increasingly broad requirements for Airsoft skirmishing.

You're sure to find what lighting you are looking for, no matter the mission, with WADSN producing anything from compact hand torches to lasers, mounts and more.