Viewing 30 of 36.
grid
list
7.49
  • Progressive Coiling
  • For AEG replicas
  • Reduces piston stress

Upgrade your stock AEG spring with a Softair's range of high-quality carbon steel springs for superior performance that may give you an edge in gameplay and improve your replica's reliability.

Constructed from burnished and pre-hardened carbon steel wire, the spring also has the addition of silicon and chromium for improved tensile strength and to reduce friction to reduce energy loss. It is recommended to use the spring in association with spring guides and bearing piston heads to ensure maximum performance and durability. The spring also features closed and flattened top and bottom ends to improve stability, with the spring also reducing stress on your replicas pistons due to the non-linear design.

Available in various strengths providing roughly 300, 345, 360 and 395 FPS respectively.

8.49
  • Spring steel construction
  • M90/M100/M120/M140 available
  • Compatible with Well MB02/MB03/MB07/VSR-10 clones

If you have a sniper rifle project on the go and your base gun is a TM VSR-10 or clone, an FPS Softair Upgrade Spring will be very useful! These springs are designed for the Tokyo Marui VSR-10 platform and should fit the various clone VSR-10 sniper rifles on the market, including the Well MB02, MB03, MB07 and MB10, the JG BAR-10, CYMA CM.701 and HFC USR-11.

FPS Softair offers a wide range of springs, so no matter what power level you are seeking, they have you covered! Options include M90 and M100 for low-velocity setups focussed on easy cocking, low wear and quiet muzzle report and M120 or M140 options for those who want to push their power level up for better range.

3.99
  • Increased gear stability
  • Improved gearbox longevity#
  • Precision adjustment

Upgrade your AEG with a replacement shim set for increased gear stability, precise adjustment and gearbox longevity. Featuring steel ST 2 K60 construction, available in a variety of thicknesses.

Specifications:

  • 20 pcs
  • 0.1/0.2/0.3/0.5 mm thickness
  • 3 mm internal hole
  • 6 mm diameter
8.49
  • Spring steel construction
  • M90/M100/M120/M140 available
  • Compatible with Well MB01 & APS2 Type 96 clones

If you have a sniper rifle project on the go and your base gun is a Maruzen APS2 Type 96 clone, an FPS Softair Upgrade Spring will be very useful! These springs are designed for the Maruzen APS2 Type 96 pattern of L96 Airsoft sniper rifle (Well MB01, Well MB08 etc) but won't fit the more recently designed Tokyo Marui L96 pattern or the AGM 002 L96.

FPS Softair offers a wide range of springs, so no matter what power level you are seeking, they have you covered! Options include M90 and M100 for low-velocity setups focussed on easy cocking, low wear and quiet muzzle report and M120 or M140 options for those who want to push their power level up for better range.

7.49
  • Anodised aluminium
  • Fits Well MB-01/04/05/08
  • 14mm CCW male thread

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB01, MB05 and MB06 spring-powered Airsoft sniper rifles

5.99
  • 6 different springs
  • Precision recalculated tension
  • Enhanced durability

If you find your springs are wearing down faster than they should you need a replacement spring set!

This  pack comes with 6 different types of spring including:

  • Switch Return Spring
  • Tappet Plate Spring
  • Anti-Reversal Lath Spring
  • Stopper Arm Spring
  • Selector Plates spring for Version II
  • Trigger Return Spring

The springs are designed for use with version 2 gearboxes, for AEG rifles such as M4s, AR36s, SMG-5 and more!

29.99
  • Upgrade kit for M4/M16
  • For AEG version 2 gearboxes
  • Increased efficiency and power

Upgrade your M4/M16 AEG. with an FPS Softair Tune Up Kit and increase its reliability and performance. The high-quality O-Rings ensure that it eliminates air leak and gives you perfect air seal for maximum efficiency and power. Constructed from Ergal (Aluminium 7075), the cylinder head has high strength and is resistant to fatigue and is made for use with version 2 gearboxes, compatible with Tokyo Marui derived designs.

This tune-up kit includes:

  • Cylinder Head (TC02E)
  • Air Nozzle with O-Ring for M4/M16 (SPM4E)
  • Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN)

This product increases the performance of your AEG.

11.99
  • CNC aluminium cylinder
  • For AEG version 2 & 3 gearboxes
  • Improved performance

Upgrade your M4/M16 AEG. with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder has a high strength and is resistant to fatigue with increased durability. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 301 to 400mm.

41.99
  • Full cylinder group upgrade kit
  • For AEG version 2 gearboxes
  • For M4/M16

Upgrade your M4/M16 AEG. with an FPS Softair Tune Up Kit and increase its reliability and performance. The high-quality O-Rings ensure that it eliminates air leak and gives you perfect air seal for maximum efficiency and power. Constructed from Ergal (Aluminium 7075), the cylinder has a high strength and is resistant to fatigue with increased durability. The cylinder head is made for use with version 2 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 251 to 300mm.

This tune-up kit includes:

  • Cylinder (CLTC)
  • Cylinder Head (TC02E)
  • Air Nozzle with O-Ring for M4/M16 (SPM4E)
  • Double O-Ring Ball Bearing AEG Piston Head Advanced Type (TPAVN)
11.99
  • CNC stainless steel
  • For AEG version 2 & 3 gearboxes
  • Improved performance

Upgrade your M4/M16 AEG. with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder has a high strength and is resistant to fatigue with increased durability. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 451 to 550mm.

11.99
  • Reduces stresses
  • Improves lifespan
  • For V2 gearbox

Standard guides do not feature ball bearings, and these are included in this product because they reduce stress on the spring by letting it rotate freely. When upgrading your gearbox bearing spring guides should always be considered because they will improve the life-span of a spring by reducing sideways stresses.

The spring bearing is construction from tough but lightweight aluminium Ergal with a smooth anodised finish. Fits version 2 gearboxes in replicas models such as M4, M16, SR16, SMG-3, MC51, G3, MINIMI, LR300.

13.49
  • Improves air seal and efficiency
  • CNC aluminium Ergal construction
  • Double O-ring and ball bearing set

Upgrade your AEGs piston head to improve air seal and increase the efficiency of airflow through the cylinder. This piston from FPS Softair has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

Constructed from CNC aluminium Ergal, which has been anodised, the piston head features a smooth precise surface. The piston head has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape.

This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double O-ring and ball-bearing. This head is designed for version 2 and 3 gearboxes but may fit other types.

21.49
  • Ready for extreme stress
  • Decreases friction
  • Better energy efficiency

Upgrade your AEG with some advanced Open Steel Bearing Bushings from FPS Softair. Upgrading your bushings will decrease the friction caused by gear rotation, resulting in a higher burst speed and better energy efficiency. The open bearing ensures higher strength compared to closed because the ball bearings are larger.

Dimensions:

  • Outer diameter: 8 mm
  • Inner hole: 3 mm
  • Thickness: 2.5 mm
11.99
  • CNC stainless steel
  • For AEG version 2 & 3 gearboxes
  • Improved performance

Upgrade your AEG with an FPS Softair Stainless Steel Cylinder and increase its reliability and performance. The cylinder is constructed from high-strength steel and is resistant to fatigue with increased durability. The cylinder is made for use with version 2 or 3 gearboxes, compatible with Tokyo Marui derived designs, with barrel lengths of 251 to 330mm.

2.49
  • Less wear than O-rings
  • Lower contact pressure
  • More consistent pressure

For a sturdy upgrade to your AEG the FPS X-Ring is a piston head seal with a quadrilobate section, which during dynamic stresses are not subject to seal rounding.

X-Rings have less wear than O-Rings as they require less radial pre-stress which results in lower contact pressure.
A lubricant reservoir can be created between the sealing lips using silicone.

Installing this ring will optimise the sealing effect thanks to a better pressure distribution due to the square section.
The X-Ring eliminates any negative effects due to the closing line of the mould, as this is located in the groove between the two lips.

7.49
  • Anodised aluminium
  • Fits Well MB-03
  • 14mm CCW male thread

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-03 spring-powered Airsoft sniper rifles.

14.49
  • High impact resilience
  • CNC Ergal aluminium construction
  • For version 2 gearboxes

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for version 2 gearbox variants of M4, M16, SR16, MP5, MC51, G3, M249 and LR300 and is compatible with ICS, Tokyo Marui, Classic Army, VFC and more. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

8.49
  • Increase power and efficiency
  • CNC Delrin construction
  • For M4/M16, version 2 gearboxes

Increase your electric M4/M16s power and air efficiency with an upgraded nozzle and O-ring. With its robust CNC Delrin construction, this will make a great enhancement over your stock nozzle and is to be used with version 2 gearboxes.

Make sure to use pure silicone oil to lubricate your cylinder head's nozzle stem before installing this nozzle.

9.99
  • Increase power and efficiency
  • CNC Ergal construction
  • For M4/M16, version 2 gearboxes

Increase your electric M4/M16s power and air efficiency with an upgrade nozzle and O-ring. With its CNC Aluminium Ergal construction with smooth anodized finish, this will make a grade enhancement over your stock nozzle to used with version 2 gearboxes.

Make sure to use pure silicone oil to lubricate your cylinder head's nozzle stem before installing this nozzle.

7.49
  • Anodised aluminium
  • Fits Well MB-02
  • 14mm CCW male thread

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-02 spring-powered Airsoft sniper rifles

5.99
  • Spring steel construction
  • Complete spring set
  • For Version 3 gearboxes

If you love working on gearboxes or have a version 3 custom build on the cards, the FPS Softair Complete Gearbox Spring Set for V3 Gearbox belongs in your toolbox. This set includes all of the springs needed for a version 3 gearbox build, including the tappet plate spring, ARL spring, motor height spring, cut-off lever spring, trigger return spring and switch return spring.

All of the springs in this set have been manufactured by FPS Softair to be more durable than the original springs and with more precisely calculated tension for maximum efficiency. Whether you've lost a spring, are working on a version 3 gearbox build or need spares for your technical projects, the FPS Softair Complete Gearbox Spring Set for V3 Gearbox will be useful addition to your parts bin!

8.49
  • CNC 7075 Aluminium Alloy (ERGAL) construction
  • For Tokyo Marui NGRS M4 series
  • Improves air seal and lifespan

If you are planning to upgrade your Tokyo Marui NGRS system M4, this nozzle will be an asset to your build. The FPS Softair CNC ERGAL Air Seal Nozzle For TM NGRS M4/AR-15 is a vast improvement over the stock polymer air nozzle thanks to its highly robust CNC ERGAL (7075 aluminium alloy) construction and internal O-ring which should provide better air seal and a slight raise in FPS as a result.

The nozzle also comes with a pair of O-rings and has an anodised finish, providing a super smooth friction-free coating which will see your NGRS M4 working at peak efficiency.

11.99
  • Carbon fibre construction
  • Reinforced build
  • Strong yet flexible

FPS Softair brings us a Carbon Fibre Reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly.

The plate is constructed from extremely lightweight polycarbon and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

2.49
  • Polymer construction
  • Suits high-speed builds
  • Friction fitting & locking

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from firing issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

14.49
  • High impact resilience
  • CNC Ergal aluminium construction
  • For version 2 gearboxes

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable AK47, AK74, KURZ / PDW, SIG, GALIL or any version 3 gearbox AEG and is compatible with ICS, Tokyo Marui, Classic Army, VFC and more. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

23.99
  • High strength, low weight
  • Polymer body and metal teeth
  • For Tokyo Marui NGRS SCAR-L/H

FPS Softair brings you the Polymer Piston w/Steel Tooth Rack for Marui NGRS SCAR-L/H, featuring a technopolymer body and a full rack of steel teeth for a good combination of high strength and low weight.

The loaded technopolymer assures great mechanical resistance and dimensional precision. The tooth rack was manufactured through the use of MIM (Metal Injection Moulding) technology since this production process guarantees dimensional accuracy and sturdiness equal to those of solid machining.

The metal injected is SAE 4650 steel, currently considered the best for this type of use. The sliding guides are designed to minimize friction and hold the lubricant for a long period of time, so you can be safe in the knowledge that your TM NGRS SCAR will have reliable and long-lasting functionality.

15.49
  • High impact resilience
  • CNC Ergal aluminium construction
  • For TM NGRS / version 9 gearboxes

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for Tokyo Marui NGRS or version 9 gearbox. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

23.99
  • High strength, low weight
  • Polymer body and metal teeth
  • For TM NGRS M4 variants only

FPS Softair brings you a super high quality M4 piston with a technopolymer body and a full rack of steel teeth for a good combination of high strength and low weight. This is compatible with Tokyo Marui NGRS M4 gearboxes, aka the Version 9 gearbox. Please note, this piston is not compatible with the TM NGRS SCAR-L or SCAR-H. 

The loaded technopolymer assures great mechanical resistance and dimensional precision. The rack was manufactured through the use of MIM (Metal Injection Moulding) technology since this production process guarantees dimensional accuracy and sturdiness equal to those of solid machining.

Currently considered the best for this type of use, the metal injected is SAE 4650 steel. The sliding guides are designed to minimize friction and hold the lubricant for a long period of time, so you can be safe in the knowledge that your AEG will have reliable and long-lasting cycle functionality.

2.49
  • Polymer construction
  • Suits high-speed builds
  • Friction fitting & locking

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing in builds with a very high rate of fire. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from high rate of fire issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

17.99
  • Improves air seal and efficiency
  • CNC aluminium Ergal construction
  • Double O-ring and ball bearing set

Upgrade your AEGs piston head to improve air seal and increase the efficiency of airflow through the cylinder. This piston from FPS Softair has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

Constructed from CNC aluminium Ergal, which has been anodised, the piston head features a smooth precise surface. The piston head has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape.

This is the most advanced version with 6 ventilation holes for higher speed and rate of fire, double O-ring and ball-bearing. This head is designed for version 2 and 3 gearboxes but may fit other types.

About FPS Softair