Refine results
Refine by
Viewing 30 of 47.
grid
list
From 616.24
Was 724.99
Save 108.75
  • Full metal and real wood construction
  • WWII Lee Enfield No.4 MK.I* Rifle
  • Supplied in a hard storage case

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

14.49
  • Matt black finish
  • Mounts to M-LOK handguards
  • Anodised aluminium construction

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

16.49
  • M-LOK compatible 
  • Aluminium Construction
  • Bipod mount for Atlas-Style Bipod

Keep the weight of your bipod-equipped rifle down with this featherweight M-LOK mount from ARES. This mount enables you to add Atlas-style bipods to your M-LOK front end. The Atlas style of bipod mounts using a large cylindrical lug and is often seen on L96s and variants in British army service. 

18.99
  • OEM Part
  • For AM002 - 006
  • Great Spare Part

A drop-in fit OEM manufactured replacement handguard, compatible with the Amoeba range of M4s, from AM002 through to AM006.

25.99
  • Easy to Fit
  • 1'' Rised Cheek
  • Finger Ridge Grip

A replacement Grip and Cheek Pad Replacement set which allows you to replace the stock parts with upgraded parts. 

11.99
  • Stippled Effect
  • Magazine Pull
  • Lightweight



A  Airsoft medium capacity magazine, providing a large ammo capacity, allowing you to shoot for longer without winding any form of wheel / steel cord.

14.49
  • For KeyMod Rail
  • Lightweight Alloy
  • Hand Stop Mount

A pair of KeyMod Rail panels, designed to be attached to KeyMod Railed Hand Guards and provide a Hand Stop point, using it to stop your hand from sliding down the front of the Handguard and stopping over reach.

14.49
  • Matt black finish
  • Mounts to M-LOK handguards
  • Anodised aluminium construction

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

14.49
  • Matt black finish
  • Mounts to M-LOK handguards
  • Anodised aluminium construction

A new line of M-LOK mounting hardware from ARES! Whatever it is you want on your M-LOK handguard, ARES can help you mount it properly! No adaptor for the kitchen sink yet though, we are waiting ARES...

16.49
  • For KeyMod Rail
  • 6'' Rail Panel Set
  • Includes Two Rails

A 20mm RIS rail section that is compatible with the KeyMod Rail system, designed to be attached to KeyMod Railed Hand Guards and Provide a 6" 20mm RIS Rail for attaching various accessories.


16.49
  • M-LOK to RIS
  • 3.5" Rail sections 
  • Light but robust Polymer construction

Looking for rails for your M-LOK handguard but want to minimize added weight? These Amoeba M-LOK rails are perfect for your needs. After all, what is the point of having an ultra-light rail system without ultra-light rails with which to add your tacticool mission essentials? Each of the two included rail sections are 3.5" in length and provide 7 rail slots with which to mount your Picatinny gear. 

16.49
  • M-LOK to RIS
  • 3.5" Rail sections 
  • Light but robust Polymer construction

Looking for rails for your M-LOK handguard but want to minimize added weight? These Amoeba M-LOK rails are perfect for your needs. After all, what is the point of having an ultra-light rail system without ultra-light rails with which to add your tacticool mission essentials? Each of the two included rail sections are 3.5" in length and provide 7 rail slots with which to mount your Picatinny gear. 

18.99
  • 2cm Extension
  • For Ares Striker
  • Alloy Construction

A threaded extension for Ares Striker sniper rifles which will add an extra 2cm to your outer barrel.

19.99
  • Stubby Magazine
  • 38rnd Capacity
  • For AS02/AS03



A 38rnd capacity magazine for the AS02 and AS03 Ares Amoeba Striker Sniper RIfle.

21.49
  • Extended Plate
  • Magazine Release
  • OEM Replacement

An OEM factory replacement magazine release for the AMOEBA AM-013 / AM-014 series of Airsoft electric guns. This particular magazine release is the lengthened, extended version. 

23.49
  • Micro RDS mount for SC-016
  • Fits SC-015 rifle scope
  • CNC Aluminium construction

This red dot sight mount plate is compatible with the Ares SC-016 micro red dot sight and allows it to be mounted above the Ares SC-015 rifle scope in a "piggyback" manner. The plate is constructed from CNC machined aluminium and includes two mounting bolts and an Allen key.

35.49
  • A Mega 900 Rounds
  • Fast Winding
  • Lightweight


A large Airsoft 6mm BB Gun M4/15/16 Magazine which will allow you to command the battle field and keep the enemy's head down with an awesome 900 round capacity magazine without carrying a bulky and cumbersome box mag.

35.49
  • A Mega 900 Rounds
  • Fast Winding
  • Lightweight


A large Airsoft 6mm BB Gun M4/15/16 Magazine which will allow you to command the battle field and keep the enemy's head down with an awesome 900 round capacity magazine without carrying a bulky and cumbersome box mag.

35.49
  • Alloy Shell Design
  • Holds up to 380rnds
  • High-Capacity Magazine

A replacement High Capacity Magazine designed by ARES for their L1A1 SLR AEG Rifle.

46.99
  • Very Robust Polymer
  • Fits Many Branded M4s
  • Replacement M4 Mag Catch

Say goodbye to STANAG! A magazine-well adaptor that allows you to turn your Airsoft M4 AEG into something a little bit different, an Airsoft replica of the 9mm M4/M16s. 

52.99
  • Silver Wiring
  • Replacement Kit
  • Upgrade EFCS Board

A replacement or upgrade circuit board for the ARES Amoeba EFCS gearbox system.

64.49
  • M-LOK Bipod
  • Full metal construction
  • Adjustable leg length 205mm-310mm

Looking for a bipod for your M-LOK equipped rifle but don't want the additional weight of using a Picatinny Bipod? You can skip the rails with this Amoeba Bipod, which attaches directly to M-LOK rail systems. 

75.99
  • High Torque Output
  • Long / Short Shafts
  • ARES Design

A High Power, High Torque Motor, which is a great replacement for Stock or Damaged Motors. ARES have created these motors as a direct replacement for any AEG which uses a Long Shaft motor, however as this motor is designed for High Torque output, please ensure that your Airsoft AEG Gearbox is set up for High Torque operation. 

If you need to replace a worn out or damaged motor, or are simply interested in tinkering with your Airsoft AEG improve its performance, these ARES manufactured High Torque motors are an excellent choice.

75.99
  • Aluminium construction
  • QD Suppressor - Add and remove in seconds
  • For the Ares AR-308 AEG rifle series

Looking for DMR-style parts for the impressive new Ares AR-308? This suppressor is designed to attach to the Ares Muzzle brake mounted to the barrel of the AR-308 series, and sports quick detach functionality. The suppressor is constructed from aluminium with a matt black finish applied and includes laser engraved markings for a realistic look. This suppressor is only compatible with the Ares AR-308 muzzle brake via its QD attachment and is not threaded.

87.99
  • 130rnd Medium-capacity magazines
  • Great value - Box of 5 magazines
  • High density polymer construction

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

87.99
  • 130rnd Medium-capacity magazines
  • Great value - Box of 5 magazines
  • High density polymer construction

If you're eyeing up one of the dazzling new Ares DMR rifles from the AR-308 range, or you own the Secutor Rapax DMR rifle, spare magazines are always handy! This box set includes 5x mid-cap magazines, each of which holds 130 BBs and can be loaded using a standard Airsoft speed loader through the fill/feed port at the top of the magazine body. These magazines are constructed from high density polymer with a rough textured finish, and the exterior design is patterned after a popular style of .308LR magazine, with reinforcing ribs on the exterior which also provide superb grip when handling the mag during a reload, and a "dot matrix" on either side so you can number your magazines for admin purposes.

From 198.99
  • Very Lightweight
  • Quick Spring Change
  • Great Trigger Response

A PDW style Airsoft 6mm AEG, and is unique to Airsoft, and is specifically designed for that purpose. This variant is constructed entirely from Polymer

222.49
  • Easy To Fit
  • Real Wood Parts
  • Wood Upgrade Kit

A real wood furniture component kit, ideal for converting your L1A1 SLR from it's late 1970's era black Polymer furniture, to its original, iconic wooden hand guard, stock, pistol grip and carry handle. 

From 233.99
  • Electronic Trigger
  • CQB Length Barrel
  • ARES EFCS Gearbox

A lightweight CQB length M4 AEG rifle. Comes with a 7'' Polymer rail perfect for attaching flashlights, lasers, PEQ box and any of your other accessories.

From 233.99
  • Electronic Trigger
  • CQB Length Barrel
  • ARES EFCS Gearbox

A lightweight CQB length M4 AEG rifle. Comes with a 7'' Polymer rail perfect for attaching flashlights, lasers, PEQ box and any of your other accessories.

About ARES

Established in 2010, ARES has been producing high-quality Airsoft products ranging from automatic electric guns, gas and spring-powered sniper rifles and grenade launchers, as well as both internal & external upgrade parts, accessories, and even a unique gun rack system. 

The Ares Amoeba range has been a standout in the Airsoft community, boasting a variety of assault rifles including the ever-popular "Honey Badger" PDW, the "Striker" sniper rifle series and their own unique programming box, allowing burst mode to be set and the Amoeba EFCS gearbox to be adjusted by the user.

Ares even delves into historical replicas of famous WW1 and WW2 rifles such as Lee Enfield, Japanese Type 96 and the Russian PPSh-41 SMG and even have their own line of BBs dubbed the Ares Amoeba Diamond Precision BB, top quality Airsoft 6mm ammunition available in a variety of different weights. 

ARES Airsoft is known for its commitment to quality and performance, whether it be Airsoft replicas, accessories, parts or BBs.