Viewing 30 of 84.
9.49
  • 130 PSI Power Up Green Gas
  • Silicone lubricant infused
  • For GBB Pistols, SMGs, Rifles

Power up your Airsoft gas pistol or rifle with the Smart Gas Airsoft Green Gas! This gas is infused with silicone lubricant, keeping your gas internals running smoothly even in temperatures as low as 5°C (using full auto will likely still cause your replica to gas out). Smart Gas™ has a composition and pressure that can provide up to 20% more power to your Airsoft platforms, as well as better consistency with rapid shots in semi.

The Smart Gas Airsoft Green Gas comes in three sizes; all have a polymer nozzle, so they won't cause damage to your magazines' o-ring seals. Each bottle comes with a cap to protect the nozzle from any damage. This is a perfect all-rounder gas for most gas Airsoft rifles. Although this gas can be used in platforms with heavy bolts, it is recommended to get something stronger.

If you need a go-to gas that can pretty much do it all, the Smart Gas Airsoft Green Gas is your best choice. With its silicone lubricant, propane mix and power-up capabilities, it keeps your replica running consistently in lower temperatures when compared to other Airsoft green gases.

Please note - The label provides two ml measurements. The canister capacity (the larger one) and actual gas volume (the smaller one) are different to allow the expansion and compression of gas based on the temperature.

13.99
  • 130 PSI Power Up Green Gas
  • Silicone lubricant infused
  • For GBB Pistols, SMGs, Rifles

Power up your Airsoft gas pistol or rifle with the Smart Gas Airsoft Green Gas! This gas is infused with silicone lubricant, keeping your gas internals running smoothly even in temperatures as low as 5°C (using full auto will likely still cause your replica to gas out). Smart Gas™ has a composition and pressure that can provide up to 20% more power to your Airsoft platforms, as well as better consistency with rapid shots in semi.

The Smart Gas Airsoft Green Gas comes in three sizes; all have a polymer nozzle, so they won't cause damage to your magazines' o-ring seals. Each bottle comes with a cap to protect the nozzle from any damage. This is a perfect all-rounder gas for most gas Airsoft rifles. Although this gas can be used in platforms with heavy bolts, it is recommended to get something stronger.

If you need a go-to gas that can pretty much do it all, the Smart Gas Airsoft Green Gas is your best choice. With its silicone lubricant, propane mix and power-up capabilities, it keeps your replica running consistently in lower temperatures when compared to other Airsoft green gases.

Please note - The label provides two ml measurements. The canister capacity (the larger one) and actual gas volume (the smaller one) are different to allow the expansion and compression of gas based on the temperature.

11.99
  • 7.4V 2S LiPo
  • 25C Discharge rate
  • 1000mAh Capacity

If you need a compact stick battery for an AR buffer tube or PDW stock, the Giant Power 7.4V 1000mAh 25C LiPo PDW Stick Battery fits the bill! This compact stick battery measures approximately 9cm x 1.1cm x 1.6cm with 5cm of wire length, pre-wired to a Deans/T-plug battery connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 25C continuous discharge rate and a capacity of 1000mAh. This uniquely small battery is ideal for practically any battery compartment and a great choice for PDW stock-equipped AEGs, though we recommend measuring up before ordering to be safe!

15.49
  • 7.4V 2S LiPo
  • 25C Discharge rate
  • 1500mAh Capacity

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this is the one! The Giant Power 7.4V 1500mAh 25C LiPo Slim Stick Battery is ideal for long, slim battery compartments, measuring approximately 16.5cm x 1cm x 1.6cm with a 5cm wire length, and is pre-wired to a Deans/T-plug connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 25C continuous discharge rate and a capacity of 1500mAh. 

11.99
  • Lower face protection
  • Fully adjustable 
  • Steel mesh, fabric harness

If you need affordable lower face protection, check out the GFC Stalker Mesh Lower Face Mask! Made from robust steel mesh with an adjustable fabric harness, this mask is designed to cover your entire lower face and can be bent to shape to conform to your face and nose for maximum comfort. 

The frontal profile is entirely steel mesh, giving you maximum airflow to ensure you stay cool while skirmishing. Designed to be worn with either full seal goggles (our recommendation) or shooting glasses, the Stalker Mesh Mask is a great way to keep your teeth safe from incoming fire while not restricting breathing or causing goggle fog!

11.99
  • Lower face protection
  • Fully adjustable 
  • Steel mesh, fabric harness

If you need affordable lower face protection, check out the GFC Stalker Mesh Lower Face Mask! Made from robust steel mesh with an adjustable fabric harness, this mask is designed to cover your entire lower face and can be bent to shape to conform to your face and nose for maximum comfort. 

The frontal profile is entirely steel mesh, giving you maximum airflow to ensure you stay cool while skirmishing. Designed to be worn with either full seal goggles (our recommendation) or shooting glasses, the Stalker Mesh Mask is a great way to keep your teeth safe from incoming fire while not restricting breathing or causing goggle fog!

11.99
  • Lower face protection
  • Fully adjustable 
  • Steel mesh, fabric harness

If you need affordable lower face protection, check out the GFC Stalker Mesh Lower Face Mask! Made from robust steel mesh with an adjustable fabric harness, this mask is designed to cover your entire lower face and can be bent to shape to conform to your face and nose for maximum comfort. 

The frontal profile is entirely steel mesh, giving you maximum airflow to ensure you stay cool while skirmishing. Designed to be worn with either full seal goggles (our recommendation) or shooting glasses, the Stalker Mesh Mask is a great way to keep your teeth safe from incoming fire while not restricting breathing or causing goggle fog!

11.99
  • 1000rnd Resealable bag
  • 5.95mm +/- 0.01mm
  • 0.36g BBs - Ideal for DMRs & sniper rifles

If you need heavy BBs for your Airsoft Sniper rifle, BLS 0.36g 6mm Perfect BBs are a sure hit! These BBs are supplied in a resealable bag containing approximately 1000 BBs. They are constructed from polymer and flawlessly polished for maximum accuracy and reliable feeding. Being 0.36g in weight, these BBs are best used with rifles with upgraded HOP-up parts, DMRs and sniper rifles. 

When it comes to tolerances, these BLS BBs easily meet the mark set by other manufacturers, guaranteeing each BB will be 5.95mm +/- 0.01mm at maximum. If you want only the best for your sniper rifles and DMRs, these are certainly it!

18.49
  • 11.1V 3S LiPo
  • 25C Discharge rate
  • 1300mAh capacity

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this is the one! The Giant Power 11.1v 1300mAh 25C LiPo Slim Stick Battery is ideal for long, slim battery compartments, measuring approximately 18.7cm x 1.3cm x 1.7cm with a 5cm wire length, and is pre-wired to a Deans/T-plug connector. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

15.49
  • Aluminium construction
  • 16mm CW to 14mm CCW
  • For SSX23, TM MK23 & ASG/STTI MK23

Want to mount your favourite tracer or suppressor to your SSX23? The Novritsch SSX23 Thread Adapter lets you do just that! Designed for the Novritsch SSX23 but also compatible with the TM and ASG/STTI MK23, this adapter mounts to 16mm CW male barrel threads and provides 14mm CCW male threading, ready for the most common suppressors and tracers on the market.

The adapter is made from aluminium and includes a helpful knurled surface so you can mount it firmly but remove it easily when needed. If you have a specific suppressor in mind but it doesn't fit the SSX23/MK23 non-standard threads, this adapter will sort you out!

From 196.99
  • PA66 Nylon polymer build
  • 6.03mm Tightbore inner barrel
  • SE™ Programmable MOSFET

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

From 196.99
  • PA66 Nylon polymer build
  • 6.03mm Tightbore inner barrel
  • SE™ Programmable MOSFET

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

From 196.99
  • PA66 Nylon polymer build
  • 6.03mm Tightbore inner barrel
  • SE™ Programmable MOSFET

Move fast and hit hard indoors or out with the ARCTURUS LWT MK-I M4/AR-15 CQB 10" AEG; SE™ MOSFET. Made from strong PA66 Nylon polymer for a perfect combination of strength and low weight, the MK-I M4/AR-15 may be cheap, but its 6.03mm tightbore barrel, pre-installed SE™ programmable MOSFET and high torque motor make it a rival for platforms twice its price!

13.99
  • 7.4V 2S LiPo
  • 25C Discharge rate
  • 1300mAh Capacity

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this is the one! The Giant Power 7.4V 1300mAh 25C LiPo Slim Stick Battery is ideal for long, slim battery compartments, measuring approximately 18cm x 0.8cm x 1.6cm with a 5cm wire length, and is pre-wired to a Deans/T-plug connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 25C continuous discharge rate and a capacity of 1300mAh. 

20.99
  • 11.1V 3S LiPo
  • 25C Discharge rate
  • 1500mAh Capacity

If you're after a slim stick battery for a top-wired AK, the Giant Power 11.1V 1500mAh 25C LiPo Slim Stick Battery will do the trick! Ideal for slim and long battery compartments in top-wired AK replicas, this LiPo battery measures approximately 16.5cm x 1.5cm x 1.6cm, with a 5cm wire length, and is pre-wired to a Deans/T-plug battery connector. This battery can also be used in M16A1 or A2 fixed stocks and AR buffer tubes, though you will be unable to collapse the stock when installed in a standard buffer tube. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

10.49
  • Steel alloy build
  • 300kg Maximum load
  • Mounts to QD sling sockets

If you're looking for high-quality QD sling mounting hardware, the PTS Low Profile QD Sling Swivel should be on your shopping list. Made from super-robust steel alloy and tested by PTS with a 300kg load, this QD sling swivel will never let you down when it counts!

Designed to mount to QD sling sockets found on many modern handguards, stocks and sling plates, the Low Profile QD Sling Swivel even includes a recessed release button to prevent accidental activation. As always with QD sling swivels, we recommend giving this swivel a hard pull once clicked into your QD socket before applying any weight to ensure your sockets are functional. 

16.49
  • For SSG96 MK1 & MK2
  • Provides 14mm CCW male threads
  • Kit your rifle out with a tracer or suppressor

If you want stealthy styling for your SSG96 sniper rifle, this is the adapter you need! Constructed from aluminium and providing 14mm CCW male barrel threading at the tip, this suppressor adapter fits both the SSG96 MK1 and SSG96 MK2, allowing tracer units, suppressors or alternative muzzle devices to be mounted with ease.

To install the adapter, simply unscrew the front cap from your barrel and screw the adapter on in its place. You're now ready to go silent with your SSG96!

17.49
  • High-density polymer
  • Rotary adjuster
  • For LCT LCK/AK AEGs

If you need better accuracy from your LCT AK AEG, this should do it! The LCT Rotary Hop Unit for AK AEG is designed for LCT AK replicas (LCK range) but may fit other brands, though we cannot guarantee off-brand compatibility currently.

This new HOP-up design brings the rotary adjuster style to the AK platform, offering reduced side-to-side shot deviation, improved setting retention, and finer adjustment increments. Like the original slider unit, this rotary accepts standard TM AEG spec HOP-up buckings, nubs and inner barrels.

20.99
  • 11.1V 3S LiPo
  • 25C Discharge rate
  • 1500mAh Capacity

If you're after a flat nunchuck, aka butterfly battery for an AR-36 or M4A1 polymer handguard, the Giant Power 11.1v 1500mAh 25C LiPo Flat Nunchuck Battery is ideal. Designed for AR-36 and M4A1 handguards but capable of fitting in various unconventional battery compartments, this LiPo battery measures approximately 9.5cm x 2.9cm x 0.6cm (per cell), with a 5cm wire length, and is pre-wired to a Deans/T-plug battery connector. This battery can also be used in M16A1 or A2 fixed stocks, AK fixed stocks or any other platform with a decently sized fixed stock battery compartment. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

23.49
  • 7.4V 2S LiPo
  • 20/40C Discharge rate
  • 1200mAh Capacity

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this battery is the perfect fit! Electro River 7.4V 1200mAh 20/40C LiPo Slim Stick Battery; Mini-Tamiya is ideal for long, slim battery compartments, measuring approximately 18.5cm x 0.8cm x 1.4cm with a 10cm wire length, and is pre-wired to a Mini-Tamiya connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 20C continuous discharge rate, a peak discharge rate of 40C and a capacity of 1200mAh. 

From 185.49
  • CNC Aluminium handguard
  • 6.03mm Tightbore inner barrel 
  • Gen.2 - Magnus™ HOP-up, Aether™ gearbox shell

If you prefer the low weight and scratch resistance of a polymer receiver but need something a cut above cheap beginner AEGs, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG is ideal. A CQB optimised build made from high-density polymer with an alloy outer barrel and CNC aluminium handguard, the SA-C10 has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're put off the PRIME™ series due to its hefty metal build and want top-notch performance in a lightweight build, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG was made with you in mind! 

From 185.49
  • CNC Aluminium handguard
  • 6.03mm Tightbore inner barrel 
  • Gen.2 - Magnus™ HOP-up, Aether™ gearbox shell

If you prefer the low weight and scratch resistance of a polymer receiver but need something a cut above cheap beginner AEGs, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG is ideal. A CQB optimised build made from high-density polymer with an alloy outer barrel and CNC aluminium handguard, the SA-C10 has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're put off the PRIME™ series due to its hefty metal build and want top-notch performance in a lightweight build, the Specna Arms SA-C10 CORE™ Gen.2 M4/AR-15 AEG was made with you in mind! 

15.49
  • 7.4V 2S LiPo
  • 25C Discharge rate
  • 1500mAh Capacity

If you're looking for a battery for an AR36 or SMG-5 handguard, this is the one! The Giant Power 7.4V 1500mAh 25C LiPo Flat Nunchuck Battery is ideal for AEG handguards and fixed stock, measuring approximately 9.5cm x 2.8cm x 0.6cm (per cell) with a 5cm wire length, and is pre-wired to a Deans/T-plug connector.

This 7.4V LiPo consists of 2 cells configured as two cell groups, with a 25C continuous discharge rate and a capacity of 1500mAh.

From 219.99
  • 6.01mm Tightbore inner barrel
  • CNC aluminium M-LOK handguard
  • ETS II Programmable MOSFET inside

If you need an ultra-compact SMG for kissing distance engagements, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU has your back. A rock-solid build making use of a CNC-machined aluminium handguard and buffer tube with an alloy outer barrel and Carbontech™ engineering polymer receiver, the Reaper is as strong as it is light, with realistic weight distribution and plenty of accessory options built in.

Inside, the Reaper XS EMR is well-equipped, featuring a TM-spec V2 gearbox with 18:1 steel gears running on 8mm oil-less steel bushings, a polymer piston with a steel tooth rack, a quick-change spring guide, and a sector gear delayer to maintain reliable feeding at high speeds. Also inside is a 6.01mm tightbore inner barrel, which boosts air efficiency and accuracy along with the ETS II programmable MOSFET/ETU, offering a wealth of programmable fire mode options while keeping your gearbox running at maximum efficiency.

This, the Reaper XS, is the shortest of the bunch, ideal for CQB sites or running as a sniper's backup, giving you competitive performance in a more compact package. If you need a platform to deal with tight turns without slowing you down, the Evolution Reaper XS EMR AR-9 PDW AEG; ETS II ETU suits your needs perfectly!

19.99
  • Teeny Tiny size
  • Compatible with most AEGs
  • Protects trigger contacts and improves ROF

This is the smallest Airsoft MOSFET on the market! It grants you a better rate of fire and trigger response, as well as protecting the mechanical trigger contacts in your AEG, as electrical currents bypass them and go straight to the motor. The MOSFET is so compact that it can be fitted to pretty much any Airsoft AEG.

It attaches to the wiring of your gun and will require some expert knowledge and skills to fit. Make sure you know what you're doing before installation! Also included in the package is a heat shrink, so you can keep this MOSFET safe after you have installed it.

34.99
  • 100rnd Capacity
  • Stamped steel shell
  • For LCT LK-33/LK-53 AEGs

If you need mags for your LCT LK-33 or LK-53, you just found them! The LCT 100rnd Magazine for LK-33/53 AEG [LK004] is a spring-loaded mid-cap magazine which holds approximately 100 BBs, loaded through the fill/feed port on the top of the magazine body. 

The magazine itself is made with a realistic stamped steel shell, polymer internals and a steel feed spring, perfectly matching the shape and appearance of real HK33 25-round magazines when inserted. Compatibility-wise, this magazine is specifically for the LCT LK-33 and LK-53 AEGs, but should also work with the Electric Blowback LCT LK-33/53 variants. 

40.49
  • 9.6V 8S NiMh
  • 2200mAh Capacity
  • Ideal for Crane stock M4 AEGs

If you're running an M4 with a crane stock and need a longer-lasting battery, the GFC 9.6V 2200mAh Ni-Mh Nunchuck Battery; Mini Tamiya is a good shout. A battery of 8 cells formed into a single long cell group, this 9.6V rechargeable NiMh battery is a perfect fit for M4 AEGs with a Crane battery stock (or similar battery stock design) and also fits great in AEGs with fixed stock battery compartments (M16, etc.). Please note, to install this battery in a Crane Stock-equipped M4, you will need to place one of the cell groups inside the buffer tube. 

The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance charging, so you can use any charger as long as it's NiMh compatible. Just make sure not to leave the battery charging unattended, and as always, we recommend using a battery safe charging bag for both storage and charging. 

From 208.49
  • CNC Aluminium handguard
  • 6.03mm Tightbore inner barrel
  • Gen.2 - Magnus™ HOP-up, Aether™ gearbox shell

If you're looking for a highly flexible M4/AR-15 platform, the Specna Arms SA-C20 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG should suit you perfectly! Kitted out with some glorious externals with a skeletonised M-LOK handguard, crane stock and railed receiver, this M4 is a great choice for any skirmisher! This, the latest version of the SA-C20, has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you need a mid-length platform with a high-quality yet lightweight build ready for any challenge on the field, the Specna Arms SA-C20 CORE™ Gen.2 M4/AR-15 AEG is the way to go!

8.49
  • 1L Water capacity
  • Hose & bite valve included
  • Ideal for small pouches

If you're looking for a compact hydration system to minimise weight on your rig, the 8Fields Tactical 1L Hydration Bladder with Hose & Bite Valve was designed with you in mind! A compact 1L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve to be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. The drinking hose also includes a fabric cover, so it blends in well with tactical gear. If you're running a small hydration pouch like the Novritsch ASPC MOLLE Hydration Pack, this is the ideal bladder!

8.49
  • 1L Water capacity
  • Hose & bite valve included
  • Ideal for small pouches

If you're looking for a compact hydration system to minimise weight on your rig, the 8Fields Tactical 1L Hydration Bladder with Hose & Bite Valve was designed with you in mind! A compact 1L capacity bladder complete with hose and bite valve, this bladder is designed for drinking on the go, though we must insist you only fill it with water and save the beer for after the game!

The bite valve includes a cover and locking mechanism, requiring the cover to be removed and the valve to be pulled out before you can bite down to release water. At the top, we are treated to a pair of loops so you can mount the bladder to a hanger inside a pouch or backpack to keep it oriented correctly for maximum comfort. The drinking hose also includes a fabric cover, so it blends in well with tactical gear. If you're running a small hydration pouch like the Novritsch ASPC MOLLE Hydration Pack, this is the ideal bladder!

The latest and greatest airsoft products to hit the market

Looking for something new that you might not have seen before? Well, you've come to the right place. We have a range of brand new Airsoft guns, tactical equipment and accessories, hand-picked from the best of everything our suppliers have to offer. We even work closely with other retailers from around the world, such as Taiwangun, to bring you the best kit out there.

All of our new products are tested in-house by our staff, who are avid skirmishers themselves. If we're not convinced that the new product will function to our high expectations, it won't hit our shelves. We keep an eye out for the newest brands of rifles, pistols, shotguns, snipers and more so you don’t have to. Simply browse our selection of new Airsoft products to find the freshest addition to your collection!

Throw away all those cheap BB guns and upgrade your collection to high quality Airsoft replicas designed to look more realistic, are made from higher quality materials, and shoot further. Take your gameplay to the next level, and never look back. You can be the envy of your friends with a replica which looks the part and will outperform any seaside special BB Gun. Want to know more? Check out our guide on why Airsoft replicas are better than BB guns.