Refine results
Refine by
Viewing 30 of 52.
grid
list
35.49
  • 150rnd Capacity
  • Dupont Zytel Polymer construction
  • Bolt lock functional - Peak realism

If you're looking for more capacity on your ASG Scorpion EVO AEG and you hate high-caps, the PTS Syndicate EPM-E9 150rnd Magazine for ASG Scorpion Evo AEGs is what you need! As with other PTS EPM magazines, the E9 is constructed from high-density Dupont Zytel polymer, the best of the best when it comes to polymers used in Airsoft.

The E9 magazine is loaded like any other mid-cap, simply load through the fill/feed port on the top using an Airsoft speed loader or loading rod. Unlike other mid-caps, the E9 magazine provides empty magazine cutoff, also known as "bolt lock", just like the original EVO mags.

The high-vis orange follower allows you to track when the mag is fully loaded through the clear witness window on each side and take a quick glance at the top of the mag with it removed to confirm you still have ammo inside. On each side and the baseplate, we are treated to a dot matrix so you can mark your magazines and keep track of which is which. The front and rear of the E9 mag also include linear texture to improve handling for easier reloads, particularly in wet conditions. If you need more mags for your CZ Scorpion EVO with more capacity than the originals, load up on PTS Syndicate EPM-E9 mags!

5.99
  • FPG Patch
  • PVC 3D Effect
  • Velcro Backed

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

5.99
  • PDR-D Patch
  • PVC 3D Effect
  • Velcro Backed

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

5.99
  • Masada Patch
  • PVC 3D Effect
  • Velcro Backed

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

9.49
  • PTS MEC Enhanced internal series
  • 2x Enhanced HOP rubbers/buckings
  • Two contact surfaces for improved consistency

The MEC HOP rubber/bucking is precision moulded and has a slightly narrower inner diameter at the entrance and extra coverage for the top of the barrel cut area for a vastly improved air seal. This HOP rubber provides two points of contact with the bb with equal pressure on either side, improving effective range and consistency.

14.49
  • Brass construction
  • Replacement knocker valve
  • For Tokyo Marui EU17 GBB

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your Tokyo Marui EU17 GBB pistol. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide.

14.49
  • Brass construction
  • Replacement knocker valve
  • For KSC/KWA GBB pistols and SMGs

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

17.99
  • Genuine PTS Product
  • Tough Polymer Construction
  • Designed for MOE Hand guards

The Magpul PTS scout mount is designed to connect directly onto any MOE hand guard, providing an attachment point for weapon lights, or other accessories that fit onto a standard 20mm rail.

22.49
  • Can Store Tools & Snacks
  • Perfect For Front Wired AEGs
  • Internal Battery Compartment

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

22.49
  • Can Store Tools & Snacks
  • Perfect For Front Wired AEGs
  • Internal Battery Compartment

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

22.49
  • Can Store Tools & Snacks
  • Perfect For Front Wired AEGs
  • Internal Battery Compartment

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

22.49
  • PTS Enhanced Polymer
  • Compatible with TM, JG, Classic Army & more
  • Reliable feeding

The PTS EPM-G Magazine is designed for use in airsoft AR36 replica's & is compatible with Tokyo Marui, Jing Gong, Classic Army, SRC, Umarex, Echo1 & other AR36 platforms alike. 

23.49
  • Protected Rubber Base
  • Magazine Fill View Port
  • Mid-Cap Magazine

A medium capacity (mid-cap) magazine designed for use with Airsoft 6mm Electric Guns (AEG). The magazine is constructed from tough DuPont Zytel Polymer, making it extremely durable and robust with a great finish.

The BB guide of the magazine is coloured bright orange, allowing you to see the amount of rounds remaining, from the top, side and lower part of the magazine, allowing you to pick up the mag and letting you know exactly how many rounds are remaining.

25.99
  • 140 rnd capacity
  • High strength Zytel polymer construction
  • Ultra-fast feeding - Keeps up with high rates of fire!

If you own an AR-9, whether it is G&G's ARP9, PCC9 or one of Classic Army's X9 series, this will be of interest! Introducing the EMP-AR9 magazine from PTS, the number one name in Airsoft aftermarket enhanced magazines. The EPM-AR9 sports high strength Dupont Zytel polymer construction and a strong feed spring, guaranteeing that it will keep up with even the highest rate of fire builds! The magazine also features a bright orange follower so you can clearly see when the magazine is empty, and a witness window on either side to indicate when the magazine is at full capacity.

29.49
  • 170 Rounds
  • Ergonomic deisgn
  • PTS Trades

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

40.99
  • Dupont Zytel
  • Redesigned Follower
  • 'Fuel Gauge' Indicator

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

51.49
  • Fibre-reinforced polymer with alloy insert
  • Includes mounting screws
  • Perfect for adding an action camera to your lid!

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

51.49
  • Fibre-reinforced polymer with alloy insert
  • Includes mounting screws
  • Perfect for adding an action camera to your lid!

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

52.99
  • High rise mount for T1 / T2 Style
  • Minimalist aesthetic
  • Built in iron sights

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

52.99
  • Ultra-fast, effortless loading
  • 1600 rnd capacity
  • Load a mid-cap in 4 seconds!

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

52.99
  • Ultra-fast, effortless loading
  • 1600 rnd capacity
  • Load a mid-cap in 4 seconds!

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

140.49
Was 163.99
Save 23.50
  • Glass Fiber Reinforced ABS
  • 3 Colour Options
  • M-LOK Side Rails

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

163.99
  • Glass Fiber Reinforced ABS
  • 3 Colour Options
  • M-LOK Side Rails

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

5.99
  • Angled & Textured
  • Improve Reload Times
  • Protects Your Magazines

A thick and tough new ergonomic baseplate for EPM style Airsoft magazines, featuring high quality manufacturing and materials, brought to you by PTS Syndicate. 

5.99
  • PDR-C Patch
  • PVC 3D Effect
  • Velcro Backed

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

5.99
  • EPM Patch
  • PVC 3D Effect
  • Velcro Backed

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

9.49
  • Replacement internals for ODIN M12
  • Includes crank wheel, handle, internal gear
  • Great to fix up an old loader!

If you have worn out your ODIN M12 speed loader we bet you are missing it dearly! Fortunately you now have the opportunity to fix it up rather than fork out for a new one! The ODIN Innovations M12 Sidewinder Rebuild Kit includes a full set of internals for the M12 sidewinder, constructed from the same high strength polymer as the original parts. You will need your outer shell, and all the pins and screws, but this set includes the magazine catch, winding wheel and all of its internal parts.

18.99
  • Barrel Nut Key
  • Steel Construction
  • For PTS MKM-AR15 GBB

A handy tool for allowing you to safely remove the barrel nut of your PTS MKM-AR15 GBB Airsoft rifle without causing damage to the rail system or barrel nut, toughly constructed from steel to ensure a quality tool.

19.99
  • For M4/15/16
  • Textured Grip
  • Durable Design

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

19.99
  • Rubber lining for ODIN M12 speed loader
  • Reduces "battle rattle" significantly
  • Dampens sound from the mechanism

If you attend long duration skirmishes or weekend events, you will probably already know the value of carrying extra ammunition. The downside, of course, is the well known "battle rattle", the sound a skirmisher makes as they sprint with a speed loader, BB bottle or high capacity magazine on their person! This innovative rubber lining from PTS ODIN Innovations is intended to solve this issue once and for all, and muffle the battle rattle for users of the fantastic M12 speed loader with this buffer kit installed. This rubber liner is installed inside your M12 loader and reduces the noise of operation, and the noise of BBs moving around inside to an absolute minimum!

About PTS Syndicate

When it comes to training, simulation and the Airsoft skirmish experience, PTS Syndicate stand out from the crowd. PTS have research and development teams located in both America and Asia which specialise in working out the best materials and manufacturing processes for high-quality Airsoft products.

PTS Syndicate specialises in a variety of Airsoft gear, featuring helmets, mounts and rails, so you can customise your loadout depending on the skirmish or your playstyle.