Viewing 30 of 77.
grid
list
From 490.44
Was 576.99
Save 86.55
  • Full metal construction
  • GBBR - Plenty of recoil and realism
  • Licenced trademarks from KRISS®

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

From 540.99
  • Full metal construction
  • GBBR - Plenty of recoil and realism
  • Licenced trademarks from KRISS®

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

From 576.99
  • Full metal construction
  • GBBR - Plenty of recoil and realism
  • Licenced trademarks from KRISS®

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

From 480.99
  • One-Piece Hop-up
  • Integrated MOSFET
  • Defiance Key-Mod Rail

Designed with quality and functionality in mind to produce rifles to a quality never seen before. The Trident SPR is a Long barreled AEG rifle, ideally suited to long-range shooting and outdoors skirmishes, and is constructed from Alloy with a polymer pistol grip and stock, just like a real AR15 rifle!

From 480.99
  • One-Piece Hop-up
  • Integrated MOSFET
  • Defiance Key-Mod Rail

Designed with quality and functionality in mind to produce rifles to a quality never seen before. The Trident SPR is a Long barreled AEG rifle, ideally suited to long-range shooting and outdoors skirmishes, and is constructed from Alloy with a polymer pistol grip and stock, just like a real AR15 rifle!

156.49
  • 60rnd Low-Cap Green Gas Magazine
  • Three magazine pack - Great value
  • Licensed trademarks from KRISS®

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

36.49
  • 95rnd Capacity
  • Mid-Cap Magazine
  • For Krytac KRISS Vector

This is a spare or replacement Magazine for the Krytac KRISS Vector Airsoft Electric Gun, constructed from Polymer and holding a total of 95rnds. It is filled using a Speedloader to feed BBs in through the top of the Magazine, and will feed until empty with zero rattle. Being a Krytac official Magazine, it features all the trademarks it should, as well as a mock capacity-indents like you would see on the real thing.

From 600.99
  • Kriss Vector Gen 2 Replica
  • 2 Round Burst MOSFET
  • Fully licensed by Krytac

Introducing the Kriss Vector, one of the most iconic submachine gun designs of recent years. The Vector has made itself known in many video games and thanks to Krytac, we now have a world-beating AEG replica version of this innovative real steel platform!

Boasting pre-upgraded Krytac internals with their in-line MOSFET to keep everything in check, the Krytac Vector is the ultimate replica of the Kriss Vector, complete with ambidextrous controls, 2 round burst mode and a high quality fibre reinforced polymer body with steel and alloy parts where needed to maintain strength. If you want a modern SMG with an iconic yet ultra-modern aesthetic you cannot beat the Krytac Kriss Vector! 

From 624.99
  • Fully Licenced by FN Herstal
  • Krytac in-line MOSFET pre-installed
  • Alpine Limited Edition - New colour & new upper receiver!


    Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

    Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

    18.49
    • Complete switch assembly
    • Includes KRYTAC MOSFET
    • Pre-wired and ready to install

    If you are experiencing issues with semi-automatic as your AEG gets older, the likelihood is your switch assembly/trigger contacts have become corroded and need replacing. Fortunately KRYTAC are here to provide a complete pre-wired switch assembly, complete with their in-line MOSFET which provides protection to the circuitry and prevents the AEG from firing if the battery voltage drops too low. The assembly comprises of the trigger contacts, MOSFET, automotive fuse, male Deans connector, and spade connectors, all wired together and ready to go once installed.

    13.49
    • Original replacement KRYTAC part
    • Aluminium charging handle
    • Hard anodized finish

    If your M4/AR15 AEG's charging handle is looking a bit tired, why not replace it for that box-fresh look! The M4/AR15 charging handle from KRYTAC is an original replacement part for KRYTAC M4/AR15 AEGs but will fit most other M4 AEGs with a version 2 gearbox. Included in the set are the charging handle and charging handle latch, the latter of which is pre-installed on the handle. The charging handle is constructed from aluminium and has a matt black hard anodized finish.

    66.49
    • High density polymer construction
    • Low profile adjustment lever
    • Ample internal battery space

    If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

    66.49
    • High Torque / Performance option
    • Steel pinion gear
    • Long Shaft - For M4/AR15 and SMG-5 (not -PDW or -K)

    If you are looking for an upgraded motor for improved trigger response, or something capable of pulling heavier springs, this will do the trick! This motor from Krytac is a high performance motor setup with a steel pinion gear pre-installed.

    The motor is available in either the 20K performance or 30K high torque versions, giving you an option for any build and one for high performance DMR platforms, depending on your build objectives. The motor comes with connections for spade connectors and includes the motor height spring. This motor is a long shaft type, which fits M4/AR15 AEGs and SMG-5 replicas, but not the PDW or K models.

    19.49
    • Polymer construction
    • Replacement original part
    • Compatible with version 2 gearboxes

    If your tappet plate has broken due to some high rate of fire shenanigans, here is what you need to fix her up! The KRYTAC Tappet Plate for Version 2 Gearbox is a replacement original part, designed for the Krytac Trident AEG series but should be compatible with almost every Version 2 gearbox on the market. The set includes the tappet plate only and does not come with a nozzle or tappet plate spring. 

    13.49
    • Replacement original part
    • Hardened steel construction
    • For version 2 & version 3 AEG gearboxes

    If you have had a mishap with your bevel gear, this KRYTAC replacement part should sort it! The KRYTAC Bevel Gear Assembly for V2/3 AEG Gearbox is constructed from hardened steel and is compatible with any AEG which uses a V2 or V3 gearbox. The hardened steel construction makes this bevel gear perfect to pair with an upgraded motor to guarantee long-term performance.

    36.49
    • Steel construction
    • 14mm CCW threads
    • Muzzle brake style with twin ports

    If you are looking for the icing on the cake of your latest build, a unique flash hider may well be the thing that makes it stand out from the crowd! The Barrett REC 7 style flash hider from KRYTAC is a faithful replica of the real Barrett REC 7 flash hider, even down to the Barrett "B in a box" logo which is engraved into the upper surface. The flash hider features two ports on either side, and can be installed by first loosening the grub screw, threading the unit onto your 14mm CCW male threaded outer barrel, and tightening the grub screw back down when the flash hider is in the correct orientation.

    7.49
    • Ported Cylinder
    • Well suited to short barrels (<363mm)
    • Brass construction

    A replacement original KRYTAC part which fits version 2, 3, 6 and 7 gearboxes. This cylinder is a Type 1, meaning it has a port in the side intended to reduce the air volume for use on short barrelled platforms (<363mm inner barrel) and prevent the "suck back" phenomenon.

    16.99
    • Replacement original KRYTAC part
    • Padding for sound dampening
    • Tight tolerances for optimum air seal

    An AEG cylinder head for version 2 gearboxes found in M4/AR15 AEGs and SMG-5 AEGs. This KRYTAC part features a dampening pad, intended to reduce the noise from the piston impacting the cylinder head and give you a smoother sounding gearbox. The cylinder head is constructed from high density polymer with a brass inner nozzle and a rubber dampening pad.

    204.49
    • Tracer unit and Extension kit
    • For KRYTAC Maxim 9 GBB pistol
    • Licensed SilencerCo trademarks

    If you have dreams of running your Maxim 9 GBB pistol with an integral tracer unit, your dreams can now become reality! The KRYTAC SilencerCo Maxim 9 GBB Tracer Unit/Extension Kit is designed to fit the KRYTAC Maxim 9 GBB pistol and extends the front end by approximately 3.1cm (not including the front piece) to accommodate the included Acetech muzzle flash tracer unit, though you can still mount the tracer without the extension kit.

    The set includes an extension piece and wide front aperture constructed from aluminium, a pair of extended steel guide rods and the tracer unit itself. This is the perfect accessory to take full advantage of the KRYTAC Maxim 9's fantastic performance in a CQB environment!

    From 552.99
    • Full metal construction
    • 6.05mm Tightbore inner barrel
    • Licenced by Warsport through KRYTAC


    If you are looking for a mid-length M4/AR-15 AEG with a look which stands out, the KRYTAC Warsport GPR-CC Assault Rifle is calling your name! This M4/AR-15 variant sports full licencing from Warsport and the bomb-proof build quality and impressive performance KRYTAC builds are known for. 

    With a 16-inch outer barrel and a lengthy upper 20mm Picatinny rail, the GPR-CC would be an ideal base gun for a DMR build (just ask Bolster Armouries!), made even better by its focus on weight reduction and mobility. The GPR-CC is ideal for the skirmisher who wants something with a longer barrel for outdoor skirmishes without compromising on agility and adjustability. 

    10.99
    • Alloy construction
    • "Milspec" trigger shape
    • Compatible with most M4/AR-15 AEGs

    If you have worn out your trigger or you're looking for a milspec trigger to replace a speedyboi flat trigger, this should do the trick! The Krytac Trident Trigger for M4/AR-15 AEG is constructed from alloy and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1 as well as practically any other M4/AR-15 used in military service in the real world.

    The trigger is designed for the version 2 gearbox found in the vast majority of M4/AR-15 AEGs, meaning this trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened up to install it. 

    22.99
    • Feed Window
    • Orange Follower
    • Textured Surface

    A Polymer constructed Mid-Cap Magazine from KRYTAC which holds a total of 150rnds and is built to the usual high standard that you would expect of a KRYTAC product.

    From 516.99
    • Barrett Licensed
    • Nautilus Gearbox
    • Ambi. Fire Selector

    This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

    From 516.99
    • Barrett Licensed
    • Nautilus Gearbox
    • Ambi. Fire Selector

    This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

    From 516.99
    • Barrett Licensed
    • Nautilus Gearbox
    • Ambi. Fire Selector

    This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

    From 600.99
    • Kriss Vector Gen 2 Replica
    • 2 Round Burst MOSFET
    • Fully licensed by Krytac

    Introducing the Kriss Vector, one of the most iconic submachine gun designs of recent years. The Vector has made itself known in many video games and thanks to Krytac, we now have a world-beating AEG replica version of this innovative real steel platform!

    Boasting pre-upgraded Krytac internals with their in-line MOSFET to keep everything in check, the Krytac Vector is the ultimate replica of the Kriss Vector, complete with ambidextrous controls, 2 round burst mode and a high quality fibre reinforced polymer body with steel and alloy parts where needed to maintain strength. If you want a modern SMG with an iconic yet ultra-modern aesthetic you cannot beat the Krytac Kriss Vector! 

    96.49
    • 95rnd Mid-Cap Magazine
    • Three Magazine Pack
    • Fully Trademarked



    A Three Pack of Medium Capacity Magazines designed exclusively for the Airsoft Krytac Kriss Vector AEG, created by KRYTAC and officially licensed by KRISS.

    From 600.99
    • Vector Gen.2 Replica
    • Special Dual Tone Edition
    • Fully licensed KRISS Vector

    Manufactured by KRYTAC this is an Airsoft replica of the world famous KRISS VECTOR. Fully licensed and trademarked this weapon features next level realism, and absolutely looks he part. This variant is the special edition dual tone version, which features both black and tan parts.

    From 528.99
    • Full Licenced by FN Herstal
    • Quick Change Spring System
    • Krytac in-line MOSFET pre-installed

    There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.

    7.49
    • 8cm x 8cm
    • Krytac Kraken
    • Velcro Backed

    A Velcro backed Textile Patch featuring the Krytac Kraken Overlord, perfect for placing on Hats, Rigs, Backpacks or anywhere with a free slot of Velcro. This is the perfect companion for your Krytac AEG, and to show your love and support on the field.

    About Krytac

    Krytac has long been known for its attention to detail, excellent exterior build quality and pulling no punches when it comes to creating solid internals that can stand the test of time. When you buy a Krytac replica, you can be sure that you're getting a quality, top-shelf bit of airsoft kit that you can rely on. in the Airsoft Skirmish field.

    Krytac holds several licenses with real-world firearm and parts manufacturers, which means that you get the most realistic product possible that will be the talk of the battlefield. If you like niche guns like the KRISS Vector, then Krytac is the way to go, as they’re a sub-company of the manufacturers of the real Vector, KRISS Group. With a pedigree like that, you know you are getting quality!

    When looking at Krytac replicas, you should expect to find MOSFETs/electronic triggers as standard, as well as reinforced Pistons, Rotary HOP Units, and Quick Change Spring systems. You can also be certain that the external build quality will be top-notch, as the company has a long history of creating real firearms.

    If you want unbeatable quality, rock-solid construction and internals that can stand the test of time, Krytac products are a perfect choice.