Viewing 16 of 16.
grid
list
From 112.49
  • 415FPS w/ 0.2g
  • Slider Type HOP-up
  • 20mm Picatinny receiver rail 

A Spring-Powered Airsoft Sniper Rifle which is based on the L96 platform, outputs a healthy 415FPS and comes included with a magazine and Speedloader.

From 112.49
  • 415FPS w/ 0.2g
  • Slider Type HOP-up
  • 20mm Picatinny receiver rail 

A Spring-Powered Airsoft Sniper Rifle which is based on the L96 platform, outputs a healthy 415FPS and comes included with a magazine and Speedloader.

From 29.99
  • Single shot
  • Pump Action
  • Magazine Fed

An ideal extremely low budget skirmish gun, or a good excuse to have a laugh in the back yard, The AGM MP003B is probably the cheapest Airsoft replica you could take to a skirmish and have any hope of getting hits with. Featuring decent FPS out of the box,  1x magazine in the package and an adjustable hop, the MP003B is ready when you are!

From 141.99
  • Full metal construction
  • Polymer or Real wood variants
  • 6.02mm Tightbore inner barrel

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

From 177.49
  • Full metal construction
  • Polymer or Real wood variants
  • 6.02mm Tightbore inner barrel

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

10.99
  • 55rnd Capacity
  • Steel shell, polymer internals
  • Compatible with AGM STEN & MP40 AEGs

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 55rnd Low-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 55 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing to a tee.

This magazine is a low-cap, meaning it holds 55 rounds and is ideal for Milsim players and reenactors who require close to real capacity magazines. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod. These mags are ideal for those who enjoy a reload under pressure, but if you want more capacity, check out the Mid-cap version.

From 200.99
  • Full metal construction - Mostly steel
  • Alloy version 7 gearbox 
  • MK II STEN replica - Perfect for WW2 kits

If you love a piece of history, you'll love the AGM STEN MK II AEG SMG! This full metal STEN gun replica is based on the real steel STEN MK II, the most commonly produced variant of this legendary British SMG. Constructed almost entirely from steel with all the details a true STEN fan would expect, the AGM STEN is internally equipped with a version 7 gearbox and fixed HOP-up optimised for 0.25g BBs, giving you a simple and reliable platform, just like the real deal. 

Whether you're looking for a base gun for a post-apocalypse build or a STEN for your WW2 OSS, French Resistance or British Army loadout, the AGM STEN MK II is a fantastic choice for a superb price!

41.49
  • Alloy construction
  • Compatible with harris lugs & bipod spigots
  • Spring loaded legs for fast deployment 

If you need something to support the weight of your sniper rifle setup, you can't go wrong with a bipod! The AGM PH-Style Telescopic Bipod for Harris Lug is compatible with common Harris-style sling/bipod lugs found on the stocks of most sniper rifles, including M40A1, M24 and VSR-10 replicas. 

Constructed from hefty alloy with a steel sling loop built-in, the PH-Style bipod boasts adjustable leg length via the pair of catches on each and the bipod feet are wedged so you can dig into soft ground for perfect stability. The legs can be deployed and stowed in an instant by squeezing the legs together, and thanks to the included spigot mount, you can quickly detach the bipod if you need to reduce weight. If you find yourself sniping from a static position more often than not, this bipod will be an asset to your setup!

18.99
  • 190rnd Capacity
  • Steel construction
  • For AGM/Cybergun MP-44/StG-44

If you're running the OG assault rifle, the MP-44 from AGM or Cybergun, these magazines are what you need to keep the kills coming. The AGM 190rnd Mid-Cap Magazine for AGM MP-44 AEG is constructed with a steel shell and polymer internals and is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. 

Compatiblity-wise, this magazine works in the AGM and Cybergun MP-44 AEGs, and its impressive 190 BB capacity with no winding wheel or battle rattle to worry about makes this the best MP-44 AEG mag for skirmishing!

From 165.99
  • Full Metal construction
  • Polymer stock and handguard
  • Approximately 498 FPS out of the box!

A great quality straight pull spring bolt action SVD sniper rifle, the AGM SVD-M is constructed entirely from alloys everywhere the real SVD is! This thing shoots very hot to boot, so make sure you check with your local site before taking this bad boy to a skirmish!

From 23.99
  • Single shot
  • Pump Action
  • Magazine Fed

An ideal extremely low budget skirmish gun, or a good excuse to have a laugh in the back yard, The AGM MP003B is probably the cheapest Airsoft replica you could take to a skirmish and have any hope of getting hits with. Featuring decent FPS out of the box,  1x magazine in the package and an adjustable hop, the MP003B is ready when you are!

11.99
  • 120rnd Capacity
  • Steel shell, polymer internals
  • Compatible with AGM STEN & MP40 AEGs

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 120rnd Mid-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 120 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing perfectly.

This magazine is a mid-cap, meaning it holds a respectable 120 rounds and is ideal for those who hate the "battle rattle" of high-caps but want a higher capacity. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.

From 224.99
  • Adjustable Hopup
  • Battery Powered AEG
  • Accurate Replica STEN Gun

An accurate Airsoft replica of one of the most iconic SMG's of all time, the STEN MK.II was the most common variant of the STEN gun family

If you're looking for an iconic submachine gun to use in World War II re-enacting or fancy skirmishing with a fully functional 6mm BB Airsoft replica that faithfully replicates one of the most iconic guns the era, the STEN MK II has a no-frills and uncomplicated design born out of wartime expediency. 

With full metal construction, the STEN MK.II AEG is the perfect weapon of choice for the history loving Airsofter.

From 177.49
  • Full metal construction
  • Real-world accurate MP40 replica
  • Steel upper receiver - Realistic build

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

From 295.99
  • Full metal construction
  • Real wood stock
  • Ideal for WW2 firearms fans and re-enactors

If you are interested in WW2 re-enactment or you have a thing for old-school firearms this should bring a smile to your face! The AGM MP-44/StG-44 AEG has the full metal construction and real wood stock any authentic replica of the real StG-44 needs, and is based internally on M4/AR-15 parts, meaning upgrades are a go!

 The StG-44 came about during WW2, issued to German Wehrmacht troops serving on the Eastern Front as an alternative to submachine guns which were the urban fighting tool to have prior to the assault rifle. Fast forward 80 years and the StG-44 is still appearing in conflict zones such as Syria and Ukraine, a testament to its forward-thinking design and effectiveness way beyond its intended lifespan.

Being constructed entirely from alloy and steel with a real wood stock to top it off, AGM's StG-44 is absolutely worthy of replicating this game-changing firearm design and tips the scales at around 3.9KG, giving us the appropriately hefty and realistic feel we expect for a WW2 rifle replica. Internally we have an alloy version 2 gearbox and an M4/AR-15 style gear adjustable HOP-up unit, both of which are fully compatible with aftermarket upgrades; perfect for performance seekers. Whether you are re-enacting WW2 scenarios or you need an interesting platform for a modern OPFOR or rebel loadout, the AGM MP-44/StG-44 is the change of pace you need!

From 768.99
  • Real wood stock
  • Removable bipod
  • Heavyweight replica

If you're looking to lay down some serious firepower, this hefty beast has got you covered!

Realistically constructed from alloy, real wood and polymer, this electronically powered 6mm BB Airsoft replica is an incredibly authentic replica of the instantly recognisable WW2 era MG42, the infamous “Hitler’s Buzzsaw”.

About AGM Airsoft

AGM, hailing from China. has a long history of producing quality airsoft guns and accessories at an affordable price. In their lineup we can see a wide range of popular Airsoft replicas of rifles  SMG’s, shotguns and more. Some of their most recognizable products include historic replicas, such as the MP40, STG44 and MG42.

They also produce tactical accessories for skirmish loadouts such as stocks and bipods, in addition to magazines for various Airsoft guns.