Airsoft Magazines

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 55rnd Low-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 55 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing to a tee.

This magazine is a low-cap, meaning it holds 55 rounds and is ideal for Milsim players and reenactors who require close to real capacity magazines. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod. These mags are ideal for those who enjoy a reload under pressure, but if you want more capacity, check out the Mid-cap version.

A spare magazine for JG T3 / G3 Style Airsoft AEG. The magazine is a high capacity magazine, storing 500 rounds.

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function!

If you want to keep your Desert Eagle running when the cold sets in a CO2 mag is the only way to do it. The 27rnd CO2 Magazine for WE/Armourer Works Desert Eagle GBB Pistol is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE/Armourer Works Desert Eagle GBB pistol and will not work in the KWC full auto version.

The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. The mag takes 12g unthreaded CO2 capsules and a single capsule can be inserted from the left side of the magazine and tightened via the Allen screw on the baseplate. As always, this magazine will require lubrication to maintain its health in the long term, and we recommend applying some Silicone Dropper Oil to the top of each CO2 bulb before inserting it. Keep your mighty Desert Eagle in the fight all winter with this CO2 magazine!

If you've had issues with your original M249 box mag or need a second due to your heavy trigger finger, the Battleaxe 6000rnd Electric Box Magazine for M249 AEGs should sort you out! This box magazine is the second generation from Battleaxe, equipped with a steel feeding gear and an uprated motor to extend lifespan and improve feeding reliability. Compatibility-wise, this mag is for A&K and Classic Army M249 AEGs but may fit other brands, though we cannot guarantee it.

Like the original M249 box mag, the Battleaxe version features both an auto-winding mode and a sound control mode, selectable through a switch on the bottom. The sound control mode will wind the mag as you shoot and the auto-winding mode allows you to re-tension the mag manually if your setup is too fast for the sound control mode to keep up. The mag is powered by a 9V battery (not included) and holds approximately 6000 BBs. If your '249 needs more firepower, the Battleaxe 6000rnd Electric Box Magazine for M249 AEGs should do the trick!

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function!

If you need AR36 AEG mags, these should do the trick! The CYMA 150rnd Mid-Cap Magazine for AR36/SL8 AEG fits both AR36 and SL8/9 platform AEGs and is constructed from a translucent brown polymer, just like the real thing. Each magazine holds 150 BBs and can be loaded from the top using an Airsoft speed loader or loading tool.

The external design of the magazine matches that of the real rifle, including a reinforcement rib on the front and an over-insertion preventing ledge, meaning even if you slap this magazine home quite hard, it won't damage your HOP-up unit. On each side of each mag, there are magazine linking lugs which can be used to connect two or more mags together, allowing for faster reloads "redi-mag" style and keeping a second magazine handy and allowing you to get back in the fight without having to fumble with pouches.

An extra Nuprol N96 magazine for the sniper who wants to stay in play for longer. Add a couple of these to your rig and you can hide in a bush for hours!

If you need mid-cap mags for your Classic Army based FAL AEG these should do the trick! The Fuxing 160rnd Mid-cap Magazine for JG/CA LK58/ SA58 AEG is constructed with a steel shell, polymer internals and a steel feed spring and as with all mid-caps, this thing doesn't rattle like maracas as you advance on the enemy!

The mag can be loaded through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading rod/tool and needs to be inserted into your LK58 or SA58 AEG with a "rock and lock" motion. The mags are designed for the JG LK58 AEG platform but should also work in the Classic Army SA58 on which the design is based.

If you are looking for magazines with a modern style for your AK rifle, this will do the trick! The NUPROL 500rnd Waffle High-Cap magazine is designed to work with AK47/74 AEGs and is a 7.62x39mm style magazine. The mag has a waffle texture on the outside to add gripping qualities and improve strength and is a wheel wound high capacity magazine which holds a tasty 500 BBs.

The magazine can be filled via the fill window at the top of the magazine body and is tensioned using the winding wheel on the baseplate. This mag has the curve of a 7.62x39 style magazine making it ideal for AK47/AKM rifles but can be used in most standard AK styled AEGs.

Manufactured from a tough Polymer and has external 'lugs' that allow you to clip multiple magazines together for faster reloads, and to save space in your chest rig by using multiple magazines at a time!

The magazine holds a total of 140rnds and being a mid-cap magazine, you will need a speedloader to fill them from the top fill area, but they will feed continuously once ready, without the tell-tale rattle that high caps make.

It should fit most Airsoft AR36s, so if you're looking for some more firepower on the field, grab some of these to complete your loadout!

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

So you are after new magazines for your sneaky Russian DMR assault rifle thing? There's little point in having such a stealth-oriented setup if your magazines rattle! Introducing the 150rnd Mid-cap magazine for the CYMA CM.099 VSS Vintorez, granting you the capacity to compete but without the rattle of high-cap magazines. The magazine features reinforcement ribs on the outside which double as gripping surfaces, and is constructed from high-density polymer. These magazines fit and feed in the CYMA CM.099 VSS Vintorez but are not compatible with AK AEGs. 

Whether you are going a Vietnam war loadout, or you just like the compact form and unmistakable design of the legendary MAC-10, you will need some spare mags to run it in true SMG style! The JG 450rnd High-Cap Magazine is designed for the JG0452 MAC-10 AEP, but should also fit and feed in the TM MAC-10 AEP. This magazine is a wheel wound high-cap constructed with a steel shell and polymer internals. The fill window can be found on the top of the magazine, and can be opened by hand and the BBs poured straight in. The winding wheel is located on the bottom of the magazine and is a slightly wider design than the norm, meaning more comfort if you have to wind in a hurry!

A 120 Round capacity Mid Cap Magazine for the UMAREX H&K MP7 AEG Airsoft Electric Gun.

A Polymer magazine for the ARP9 Airsoft Electric Gun, which holds a total of 60rnds and feeds BBs into the gun via a spring, meaning they feed completely until empty. Not only this, but they have actual dummy rounds (not just stickers) inside to look just like the real deal.

If you need to load up on magazines for your SMG-7 AEP, but you don't want the "battle rattle" from using high capacity magazines, you'll need a few of these! The 100rnd Mid-cap magazine for the well R4 is constructed with a steel upper shell and feed spring, and a polymer lower shell with polymer internals. The magazine includes "4.6x30" stamped markings on the left side of the shell and realistic reinforcement ribs along the sides of the upper shell. This magazine holds 100 6mm BBs and can be fed through the feed/fill port at the top of the magazine using a standard Airsoft speed loader. The magazine is designed for the Well R4 but should work in most SMG-7 AEPs. 

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

A CO2 powered magazine designed for use in the RAVEN EU Series 18 GBB pistol and WE Europe's G-Series of pistols, which performs better than traditional gas magazines in colder weather.

A gas blowback Airsoft CO2 magazine developed by VORSK for their Hi-Capa Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard length and holds 23 rounds and is a direct replacement for the magazine which comes with the pistol. The mag is filled with BBs from the top or front and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK Hi-Capa Series pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

Need some extra firepower for your AK AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic and is a low-profile alternative to full-sized AK drums, allowing you to get lower in the prone position to make the most of the surrounding cover.

A 6mm BB Airsoft 450 round high capacity magazine, designed to be used with Double Eagles M89A series of Airsoft Electric Guns.

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

If you are looking for magazines with a modern style for your AK rifle, this will do the trick! The NUPROL 500rnd Waffle High-Cap magazine is designed to work with AK47/74 AEGs and is a 7.62x39mm style magazine. The mag has a waffle texture on the outside to add gripping qualities and improve strength and is a wheel wound high capacity magazine which holds a 110 BBs.

The magazine can be filled via the fill window at the top of the magazine body and is tensioned using the winding wheel on the baseplate. This mag has the curve of a 7.62x39 style magazine making it ideal for AK47/AKM rifles but can be used in most standard AK styled AEGs.

If you're a realism-focused player running an AK AEG, this mag is ideal! The ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs boasts a unique modern design with a flat baseplate for mag-podding, a witness window on each side to keep track of rounds remaining and a dot matrix so you can mark your mags with a paint pen. The party trick of this magazine is its ability to switch capacities from a realistic 30 BBs up to a skirmish-friendly 130 BBs by removing the internals from the shell and flicking the switch on the internal body. 

As with other spring-fed mid-cap magazines, the 30/130rnd Variable-Cap Mod.1 is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. If you rock an AK AEG in game and want the choice of firepower or realism without bringing two types of mag, load up on the ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs!

If you're a realism-focused player running an AK AEG, this mag is ideal! The ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs boasts a unique modern design with a flat baseplate for mag-podding, a witness window on each side to keep track of rounds remaining and a dot matrix so you can mark your mags with a paint pen. The party trick of this magazine is its ability to switch capacities from a realistic 30 BBs up to a skirmish-friendly 130 BBs by removing the internals from the shell and flicking the switch on the internal body. 

As with other spring-fed mid-cap magazines, the 30/130rnd Variable-Cap Mod.1 is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. If you rock an AK AEG in game and want the choice of firepower or realism without bringing two types of mag, load up on the ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs!

A 20 Round Green Gas Powered Magazine designed for the GLOCK 19 Gen4 by UMAREX.

If you need spare magazines for your Cybergun WE/Armourer Works Desert Eagle GBB you have found them! These mags are constructed from alloy with polymer feed lips, a steel feed spring and brass valves and are compatible with the Cybergun Desert Eagle but only the version manufactured by WE or Armourer Works.

Each mag is designed to mimic the real thing perfectly, complete with mock witness windows on the left side with numerical engravings indicating the capacity of the real Deagle. The gas fill valve is located on the baseplate and the mag is compatible with summer gas, green gas and red gas. Unlike other GBB magazines, this mag cannot be loaded through the feed channel as it is closed off like a GBBR mag and instead must be loaded through the feed lips at the top of the mag, so we recommend using a speed loader with a GBB adapter for ease of loading (like this).

Please note, this magazine is NOT compatible with Cybergun's KWC Desert Eagle CO2 FULL AUTO and will only work with Cybergun WE/Armorer Works Desert Eagles.