8Fields Tactical Airsoft Gear and Equipment

If you are getting a bit hot under the collar wearing a plate carrier when skirmishing in summer, or you want a rig that combines flexibility and low weight for a high speed CQB loadout the 8Fields Tactical Buckle Up/MOLLE chest rig would be ideal. This chest rig is constructed from 1000 denier Polyester giving it strength and water resistance thanks to its high stitch density. If you use a buckle-up plate carrier as your primary rig, this chest rig can make a great alternative for summer skirmishing, allowing you to quickly move your buckle-up front panel from plate carrier to chest rig and benefit from better cooling and more airflow.

A 20L Capacity Rucksack / Backpack for Airsoft, Hiking and other Outdoor Activities, which is made from a tough and durable 1000D Polyester Material with Water Resistant properties and stiffened walls to retain its' shape. With external MOLLE Loops, Hook & Loop Panels and Compression Straps, there's not much this Backpack can't do.

The 8 Fields Tactical ID Card holder is designed to hold either real-world ID cards, team identifiers or scenario-based ID. The holder can either be mounted to Velcro like a patch, or can be carried on the included lanyard. Your ID card is contained inside a transparent polymer window, through which the ID will be visible but protected from damage. This window is sized to suit credit card sized ID cards. Whether it is for Airsofting or real-world stuff, this 1000D nylon ID card holder will keep your ID safe and secure however you decide to carry it!

Looking for an efficient way to hold your Airsoft shotgun shells? 8Fields has got you covered with their 5rd Shotgun Shell Panel. With it's waterproof1000D Polyester construction and elasticated loops to hold your shells tight and secure. Attached to MOLLE via sturdy metal studs, you can be sure your shells are always ready for action and as secure as your objectives.

A MOLLE compatable magazine pouch, designed to hold a single STANAG magazine, made to be both low profile and lightweight for high speed Airsoft setups. 

A low profile and simple sling which aims to reduce clutter on your rig, and to transfer the weight of your RIF onto your chest rig, rather than resting on your neck.

A simply and tough carrier for 5 x Airsoft Shotgun Shells, which fits into MOLLE Loops on your rig to provide a snug and flush area to store some Airsoft Shotgun Shells, ready to go for a quick reloads.

A Single Point Sling for Airsoft Guns and other imitation firearms, that attaches to MOLLE compatible Plate Carriers and Chest Rigs. Ideally mounted on the back of your Rig and running over your Shoulder, this Single Point Bungee Sling will hold your Rifle off to one side, closely into your shoulder, whilst giving you the freedom to handle it as normal. The Sling has a Quick Release Buckle, allowing you to easily hand over your Rifle to a Marshal or take it off after a long day, and the Single Clasp is protected by a sleeve of Elastic, protecting your Airsoft Gun from marks.

For those of you that like to keep things simple but effective. If you like to run a high speed low drag kit, this pouch will suit you nicely.

Constructed from tough, water resistant 1000D polyester, holding your M4 safe and secure with elasticated bungee retention, it is mounted to your MOLLE system with press stud button straps.

Also featuring front facing MOLLE straps, this pouch gives you additional customisation options, while keeping a low profile, for those players who value speeds and manoeuvrability on the battlefield.

For those of you that need your shells as close as possible, ready for a quick reload. This holds up to 6 Airsoft shotgun shells and is constructed from water resistant 1000D Polyester is mounted to the buttstock of your shotgun of choice.

The straps are secured in place with Velcro and are adjustable to suit your piece, and the shells are held tightly in place with elasticated loops.

You can be sure when skirmishing that your spare shells are always within quick and easy reach for rapid reloads.

A lightweight MOLLE compatible radio pouch to attach onto tactical gear like chest rigs, vests or belts, designed to allow you to carry a personal radio into Airsoft Skirmishes. 

A 1000D Polyester constructed pouch for Shotgun Shells which holds a total of eight shells, and is mounted to your arm so that your spare shells are always within quick and easy reach for rapid reloads.

A panel for MOLLE Systems, allowing you to install MOLLE compatible pouches horizontally for easier access to Magazine Pouches/Holsters etc. This is also a great way to maximise available space on a Chest Rig, by installing further Mag Pouches on already existing pouches, so as not to get in the way of your equipment.

If you have a normal belt but you want to add a MOLLE holster or pouch, you are in luck! The Belt Mounted MOLLE Panel from 8 Fields Tactical provides 3 rows of molle, with the two columns on either side providing two loops, and the central 4 columns providing 3 loops of attachment surfaces. This panel attaches to any belt of fewer than 2 inches in width and is a great way to add MOLLE pouches, holsters and other accessories to your bog-standard belt. The panel is constructed from 1000D Polyester giving it both strength and water resistance. 

If you're the type of player who never knows which pistol they will choose for this week's skirmish, the 8Fields Tactical MOLLE Pistol Magazine Pouch is designed with you in mind. This pouch can accept practically any Airsoft pistol magazine, and only requires adjusting the built-in bungee cord to adjust the sizing to fit smaller or larger mags. This pouch attaches to any MOLLE attachment surface and is secured by a single MOLLE strap with a tab at the bottom for friction retention. As a bonus, this pouch is sized appropriately to hold VSR-10 sniper rifle style magazines as well!

If you like to run a high speed low drag belt kit, this pouch will suit your needs! The Belt Mounted Versatile Rifle Magazine Pouch from 8Fields Tactical is constructed from robust and hard wearing 1000 denier polyester and can be attached to any belt of 2-inch or 5cm in width using the velcro belt loop attached to the rear of the pouch. This pouch is adjustable in size and will fit M4/AR15 magazines and also AK platform magazines with the bungee cord adjusted to suit via the adjuster on the rear. This pouch also features MOLLE loops on the front, allowing MOLLE compatible pouches to be stacked on top if you need to carry more on your belt rig.

Pistol mag retention or rifle mag retention? Why not both?

With two stacked pockets in a low profile design, held together with elastic bungee retention cord, you can be sure that both your main and sidearm mags are kept safe and secure and to hand for quick reloads all in place!

The magazine pocket is designed for STANAG type mags in mind with the front most pistol pockets able to fit a whole range of pistol magazines such as EU17 or 1911 systems.

Mounted by MOLLE straps with push button studs, this pouch is for those of you that like to keep things compact and efficient, combining the best of both worlds for those speedy reloads in the heat of battle.

A lightweight but tough pouch to keep up to two of your Airsoft rifle magazine safe and secure.

The two elasticated retention pockets hold your mags tight ready for reloads and double trouble.

Simple but effective, this an ultra compact and MOLLE compatible solution to Airsoft pistol magazine storage. Holding up to 2 magazines with elasticated retention pockets to keep your mags secured tight while giving you a slim profile when attached to your rig.

Looking for a solution to quick radio adjustment on the fly? This Open-Top MOLLE Radio Pouch from 8Fields Tactical allows you to securely store your radio on your rig with full access to any controls on the top, and controls on either side. Comms during skirmishing are important, something 8Fields understands with their quality pouch.

This versatile Grenade Pouch is able to fit many sizes of Grenades and other vital pieces of equipment, with it's elasticated design it can be stretched wide to accommodate what you require. The adjustable toggle allows you to adjust the amount of tension on the outside of the Pouch, so that you can have it super-loose or gripping your Grenade so hard it nearly detonates. The Pouch is MOLLE compatible and is mounted to compatible systems using the flap on the rear keeping your grenades close and the havoc closer!

A modular MOLLE pouch designed to securely store one standard sized Airsoft pistol magazine, and can be fitted to a variety of belts or rigs. 

A fabric magazine pouch designed to hold SMG-5, SMG-7 and MP9 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A unique one point sling that mounts to a chest rig and feeds down the shoulder straps to evenly distribute weight across your shoulders, and make slinging a heavy rifle much more comfortable.

A 1000D Polyester constructed Magazine Pouch for P90, UMP and SMG-5 Platform Airsoft Mags. The pouch is compatible with MOLLE systems, and so can be mounted anywhere on your loadout that has MOLLE Loops available. The Pouch holds 2 x Magazines, and holds them in place with a Velcro Flap Cover so they can't escape whilst you're on the move. If you own one of these tricky-sized Airsoft Guns and want to carry more Magazines on you, so that you can play for longer, this is exactly what you need.

A Double Magazine Pouch for Airsoft Replica Pistol Magazines, happily holding two Single or Double Stack Mags. Compatible with MOLLE, this Pouch will easily install to any MOLLE Chest Rig, Plate Carrier or Drop Leg Platform, and is the perfect way to carry enough Magazines on you to have a good run with your Pistol when you need it! Carry more Magazines and play for longer without having to crawl back to the Safe Zone for a reload.

A foldable Dump Pouch for Belt Systems, available in range of colours, that is perfect for facilitating fast 'operator-style' reloads or just for general storage of items that don't have a place on your Rig, such as TAG Rounds. Constructed to a tough standard using 600D Polyester, this Pouch is Water Resistant and tough enough to carry up to about 8 x M4 / STANAG Magazines. Easily mounts to your Belt via Velcro Straps, and features a Velcro Retention Strap to keep the contents secure.

If you are looking for a way to carry your 7.62 styled mags look no further! The Sniper Rifle/7.62 Mag pouch from 8Fields Tactical provides an ideal pouch for G3, SR25, M14 and SVD magazines, as well as being able to hold large sniper rifle magazines or multiple small sniper rifle mags.

A sturdy waterproof pouch to keep up to three of your Airsoft rifle magazine safe and secure.

Elastic with MOLLE attachment, it'll hold a variety of magazines and at 3 at a time you won't be going empty any time soon.

A lean triple threat, this an ultra compact MOLLE attached solution to Airsoft pistol magazine storage. Holding up to 3 magazines with elasticated retention pockets to keep your mags secured tight while giving you a slim profile when attached to your rig.