Search results for 'rig'

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

A compact and seriously tough Hard Case that is designed for Mobile Phones, Passports and other small and important items that need to be kept safe from Water, Dust, Extreme Temperature and Crushing. Whether you're sailing the water, backpacking in the outback or working hard on site, this Hard Case is perfect for keeping your most sensitive items safe.

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

If bullpup AUGs weren't unique enough, get a load of this! This AUG carbine is jam packed with features, customisation options as well as having a compact design perfect for those tight CQB encounters. With full metal construction to complete the look, what's not to love?

Do you need the ultimate in travel protection for your Cameras, Passports, Mobile Phones and more? This Hard Case Series offers an IP65 Watertight design as well as Crush & Dustproof performance. Not only this but it is rated to withstand temperatures between -10°C and 200°C, allowing you to take your most delicate valuables to most places on Earth without worry. Whether you're hard at work, backpacking across Europe or sailing the open seas, you will find a use for the PARRA LITE Hard Cases.

Complete your sniper camouflage with the Novritsch Modular Suppressor V2 Camo Cover. The cover can be cut into sections to fit shorter suppressor lengths and tightly slips over your Novritsch Rectangular Modular Suppressor V2 to let it seamlessly blend into your surroundings, featuring irregular 3D leaf patterns, which are incredibly realistic so you can go unnoticed on the field.

Complete your sniper camouflage with the Novritsch Modular Suppressor V2 Camo Cover. The cover can be cut into sections to fit shorter suppressor lengths and tightly slips over your Novritsch Rectangular Modular Suppressor V2 to let it seamlessly blend into your surroundings, featuring irregular 3D leaf patterns, which are incredibly realistic so you can go unnoticed on the field.

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

If you need a rifle mag pouch which fits almost every assault rifle replica out there, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M4/AR-15 mags to AK and 7.62x51 DMR magazines. The only mags that won't quite fit in are HK417 mags, though AR36 mags fit in nicely with some adjustment. 

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring multiple rigs, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is the pouch you need!

If you need a rifle mag pouch which fits almost every assault rifle replica out there, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M4/AR-15 mags to AK and 7.62x51 DMR magazines. The only mags that won't quite fit in are HK417 mags, though AR36 mags fit in nicely with some adjustment. 

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring multiple rigs, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is the pouch you need!

If ye are the type to hornswaggle yer self some booty and make the bilge rats of the enemy team walk the plank, this patch is for you! The JTG No Fear Pirate 3D Rubber Patch depicts the Jolly Roger, aka the skull and crossed swords pirate flag in white on a black background with a grey border. This symbol is one of the most recognisable symbols of incoming terror worldwide, so if you give no quarter as you heave to the bilge-sucking scallywags on the other team, display this ensign on your slops!

The patch is hexagonal in shape (it's the best shape) and measures 3.2x3.7cm approximately, making it ideal for small areas of female velcro like those on some first aid pouches. The hexagonal shape also allows this patch to sit neatly alongside other hexagonal patches, allowing you to cram more morale-boosting patches onto your kit than ever before!

A solid and dependable Hard Case for the storage/transport of sensitive items such as Mobile Phones, Passports, PDAs, Cameras and more. Not only is this Case made to be super tough, but it has an IP65 Watertight, Crushproof and Dustproof design, along with Stainless Steel Hardware and a resistance to extreme temperature (-10°C to 200°C). If you need to keep your delicate electronics safe whether you're on the move or working on site, then the PARRA LITE series is the answer.

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!

The PARRA LITE Hard Case Series provides solid and reliable protection to your delicate electronics, protecting them from Water, Dust and Crushing, as well as Extreme Temperatures ranging from -10°C to 200°C. Whether you're out on the water or up to your neck in dust, if you need to keep your valuables safe and close by, then the PARRA LITE Hard Case is the perfect choice.

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

The PARRA LITE Hard Case is a compact Hard Case that is rated to withstand the ingress of Water and Dust, as well as having a Crushproof design and extreme temperature ratings. Whether you're sailing the seas or working in a saw mill; if you need protection for your most valuable assets whilst on the go, then the PARRA LITE Hard Case series are perfect for the job.

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you play to win, you will need this to keep up! The Well WE23-S Rotary Minigun AEG is a unique design from Well, part of its "PRO" line of high end AEGs. This Airsoft Minigun is constructed primarily from high density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 1200rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tightbores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a TDC design with grub screws to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible 36 rounds per second on an 11.1V LiPo battery and a monstrous 1200rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you are in the market for a new pistol grip and you are a CQB player, a PDW style grip with a refined angle is the best thing for the job! Introducing the PDW Pistol Grip for M4/AR15 AEG from CYMA, a high density polymer pistol grip with a more vertical angle than standard M4/AR15 grips, making it more suitable for use with modern shooting stances.

The No. 529 Boomslang Hard Case is named after the Sub-Saharan Snake and will protect the contents stored inside with the same effectiveness. Ok, maybe it doesn't have life-threatening Venom, but it is independently tested, assured and certified by Intertek to be Waterproof, safe from Impacts and Crushing, as well as protected from Extreme Temperatures ranging from -40°C to 90°C. With several layers of Eggbox, Protective and Pick n' Pluck foam inside, you can depend on the Boomslang to protect any sensitive or delicate equipment inside.

A Polymer and Alloy replica of an Austrian favourite! The Bullpup design allows for a very long inner barrel in a more compact package, offering you long-range performance in a medium-sized and ambidextrous bundle.