- Full metal construction
- Extended ambidextrous magazine release
- Silent piston and cylinder head
If you are in the market for something with stealthy looks that is also remarkably quiet to shoot, check out the CM.070 M4SD from CYMA. This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, alloy rotary HOP-up unit, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. Coupled with the included suppressor, this AEG is practically as quiet as they come out of the box!
- Sneaky Starter Bundle
- DA-B03-ETU BRAVO™ Silent Ops, Red Dot & 2 extra mags
- LiPo battery, charger, charging bag, BBs & speed loader
If you want to start your Airsoft journey with something that shoots a little better than the usual beginner platform, this bundle is ideal. The Silent OPS CQB Bundle is based around the pre-upgraded DA-B03-ETU with its integral suppressor, hybrid aluminium/high-density polymer build and programmable fire controls including burst mode, pre-cocking and binary trigger.
We paired the DA-B03-ETU with 2 spare mags, BBs and a speed loader so you can keep it topped up, a Red Dot Sight for fast target acquisition (lens protector recommended) and a LiPo battery, charger and charging bag to keep it fueled.
This setup would be ideal for a sneaky CQB specialist or an aggressive outdoors skirmisher who wants to start with the edge over other newcomers. The DA-B03-ETU is a cut above standard beginner AEGs thanks to its electronic trigger unit which gives it a frightening semi-auto trigger response and killer rate of fire!
- Full metal construction
- Dark Matter™ brushless motor
- Gate ASTER II™ or HAL¹ MOSFET
If you're looking for a modern AR platform packed with pre-upgraded parts, the Specna Arms SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG is exactly that. A high-quality full metal build on the outside with a sleek M-LOK handguard, 20mm Picatinny railed receiver and Specna Arms SAAS angled foregrip pre-installed, the SA-P22 is equally impressive on the inside, equipped with Specna's top-of-the-range internals, which are even better than the previous EDGE 2.0 lineup!
The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.
If you're not the type to delve into Airsoft internals but you still want top tier performance, Specna's PRIME™ range was made with you in mind. With a brushless motor, programmable MOSFET, upgraded HOP-up unit and stainless steel tightbore under the hood, you'll never need to upgrade SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG!
- Full metal construction
- 6.04mm Tightbore inner barrel
- TM ZET System clone - Ideal base for custom builds
If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.
Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!
- KRYTAC Barrett REC7 DI Carbine AEG
- 2 Extra mid-caps & HASTA XL Hard Case
- Guerilla Tactical 552 & Ghost 3x FTS magnifier
If you're looking for an Airsoft bundle based around one of the best M4 AEGs on the market, you just found one! The KRYTAC REC7 Premium Primary Pack; Carbine includes the KRYTAC Barrett REC7 Carbine AEG, 2 extra mid-cap magazines, a holographic style red dot sight from Guerilla Tactical with a Ghost 3x Flip to side magnifier. The set also includes the HASTA Extra Large Wheeled Rifle Case, giving you a nice home to store your new premium primary!
- High-density polymer/CNC alu handguard
- 6.03 Tightbore inner barrel
- HAL¹ ETU Pre-installed - Programmable fire modes
This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!
This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.
Based on the iconic Steyr AUG carbine, this compact 6mm BB Airsoft gun is a lightweight and compact electrically powered replica AUG. Realistically constructed from polymer with an alloy front end, the AUG is supplied with an aluminium foregrip.
- M4A1 CQBR style AEG
- 2 extra mags, BBs & speed loader
- Ni-MH battery, charger & charging bag
If you have a taste for the classic Military configurations but move fast or primarily play CQB, this bundle should suit you perfectly! The CHARLIE™ M4 CQBR Bundle pairs the DA-C02 CHARLIE™ CQBR with 2 extra spare magazines, BBs, a speed loader, a Ni-MH battery, charger and charging bag. All you need now is your choice of eye/face protection!
- Full metal construction
- Grand Power licensing!
- 6.03mm tightbore barrel
If you are keeping your eye out for a base for your dream DMR build and have a certain sneaky playstyle and you want some real steel licensing to add the cherry on the top for realism, then the Delta Armory DA-GP-A10 ALPHA™ Silent Ops DMR M4/AR-15 AEG is just what you need! This M4/AR-15 platform is part of Delta Armory's ALPHA™ line, top of the range when it comes to externals and boasting more than its fair share of pre-upgraded internal parts as a bonus!
Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The quick change spring makes for a relatively easy DMR upgrade, meaning if you want the DA-GP-A10 to live up to its name you'll have a much easier time of it!
Whether you're working on a suppressed DMR build or a fan of Airsoft platforms with real steel licensing, the DA-GP-A10 ALPHA™ Silent Ops DMR already has the aesthetic and the upgraded internals; all it needs is pointing in the right direction and paired with the correct outfit!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Pre-installed FE® programmable ETU
If you need a slick Airsoft assault rifle that's ready for any battle scenario, the ARCTURUS ARC FE™ AR-15 AEG is prepared for that duty! This full-metal AEG looks the business with its ultra-modern external look, as well as its pre-installed FE® ETU, which offers a range of programmable options using just the fire selector and trigger.
You can get this rifle in a carbine length, better suited for outdoors and longer ranges, or a CQB length, which is perfect for those tight corners in your local CQB site. Overall, this rifle is a great choice for any skirmisher who wants to pair a premium look with a premium performance!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Pre-installed FE® programmable ETU
If you need a slick Airsoft assault rifle that's ready for any battle scenario, the ARCTURUS ARC FE™ AR-15 AEG is prepared for that duty! This full-metal AEG looks the business with its ultra-modern external look, as well as its pre-installed FE® ETU, which offers a range of programmable options using just the fire selector and trigger.
You can get this rifle in a carbine length, better suited for outdoors and longer ranges, or a CQB length, which is perfect for those tight corners in your local CQB site. Overall, this rifle is a great choice for any skirmisher who wants to pair a premium look with a premium performance!
- High-density polymer construction
- 6.03mm Tightbore inner barrel
- Suppressor, vertical grip & rail covers included
Whether you are imitating a US Navy SEAL Sniper or you simply appreciate a supersized 7.62x51mm style AEG which is ready for both DMR duty and assault rifle capabilities straight out of the box, the A&K SR25/Mk11 MOD 0 AEG should suit you well. This AEG is styled after the real steel SR-25 (Stoner Rifle-25) that was first issued to Navy SEAL snipers who assisted operations in Somalia in 1993.
This AEG looks clean and surgical, and you best believe it shoots like it, too! The A&K Mk11 MOD 0 SR-25 AEG Sportsline is sporting a version 2 long gearbox (aka V2.5) complete with steel gears running on 8mm ball-bearing bushings. This, paired with the extremely long barrel that this rifle boasts, results in some sublime accuracy potential straight out of the box. If you're looking for a brilliant platform that is adaptable for both assault rifle and DMR builds, then look no further, the A&K SR25/Mk11 MOD 0 AEG might be just what you need!
- Solid Build Quality
- Real Wood Furniture
- Full Alloy Construction
An absolute pleasure to hold and shoot. Don't let the budget price tag put you off. This AK is rock solid and every shot is lovely and crisp. The wood is genuinely real and finished to a high quality with no fraying or splintering on any edges.
- Threaded Barrel
- Dovetail Side Rail
- Real Wood Furniture
This AKM Platform Airsoft Gun is powered by a battery in the stock and features realistic construction with Real Wood Furniture, as well as a Dovetail Side Rail for AK specific attachments.
An Electric Powered Airsoft AEG, designed to look like the MK12 Special Purpose Rifle which is currently in service and used by the US Navy SOCOM Units, and was built by CYMA with custom design elements added by P&J and is the perfect base for a DMR Rifle.
- DA-B15-ETU MK18 MOD.1 AEG & Red Dot sight
- 2 extra mags, BBs, speed loader, battery, charger & charging bag
- Ideal for indoors or outdoors skirmishing
If you're after an MK18 and a full complement of accessories, this is what you need! The Delta Armory MK18 BRAVO™ Binary Bundle pairs the Delta Armory DA-B15-ETU MK18 with 2 extra magazines, a red dot sight (lens protector recommended), BBs, a speed loader, LiPo battery, charger, and a battery charging bag, giving you everything you need to get going with a slick Military style setup!
This bundle is named for the Binary Trigger function of the pre-installed ETU system inside the MK18, though it can also provide burst mode and pre-cocking for a faster trigger response. If you do a mix of indoor and outdoor skirmishing, this setup will see you well-equipped!
- Full metal build - Loads of steel!
- 6.03mm Tightbore inner barrel
- Optical MOSFET - Programmable fire modes
If you're a fan of the AK platform but prefer a Western look, the ARCTURUS Advanced Tactical AK MOD1 Carbine AEG w/Optical MOSFET is the one to go for! A full metal AK-105-style mid-length platform with loads of steel parts in the mix, the Tactical AK MOD1 makes use of dynamic, modern furniture designed by ARCTURUS, drawing inspiration from the best of the best in the real steel Tactical AK world. The good stuff isn't exclusive to the outside, either!
Internally, the Tactical AK MOD1 is very well equipped, boasting a reinforced version 3 gearbox shell with a pre-installed Optical MOSFET to provide programmable fire modes, improve the trigger response and protect the internal circuitry from excess wear. Also inside is a 25K high torque motor, an 18:1 CNC Steel gear set, a 6.03mm stainless steel tightbore inner barrel and a plethora of reinforced gearbox internals. While it is compatible with most version 3 gearbox AEG upgrades, you probably don't need it with this kind of heat under the hood!
Equipped with 20mm Picatinny rails, M-LOK slots, QD sling sockets and the cutting-edge 1913/20mm Picatinny stock interface at the rear, this AK build is about as modern as they come and ready to be dressed up with whatever accessories you need to complete the mission at hand. If you're after a realistic, modern AK but don't want Russian vibes, the ARCTURUS Advanced Tactical AK MOD1 Carbine AEG w/Optical MOSFET should be your next primary!
- Full metal construction
- HAL¹ Programmable MOSFET inside
- Dark Matter™ Brushless motor & Magnus™ HOP-up
If you're after an ultra-modern full metal AR build packed with pre-upgraded goodies, the Specna Arms SA-P28 PRIME™ Daniel Defense® RIII™ 12.5'' M4/AR-15 AEG should be right up your street! This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.
The Prime™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!
If you're sick of upgrading AEGs and want something that shoots flawlessly straight out of the box, the Specna Arms SA-P28 PRIME™ Daniel Defense® RIII™ 12.5'' M4/AR-15 AEG is perfect for you! Why not save yourself the hassle of fiddling with internal parts and save that energy for game day?
- High density polymer construction
- 6.02mm Tightbore inner barrel
- Cold War era AK for mechanised/airborne infantry
If you like the Cold War AK aesthetic, you'll love the S&T AKS-74N Sports Line! Patterned after the real steel AKS-74N, the folding stock AK-74 issued to paratroopers and mechanised infantry with a Russian AK side optics rail, the S&T AKS-74N is constructed primarily from high-density polymer with alloy and steel parts, keeping weight low and agility high.
Inside, we are treated to a 6.02mm tightbore inner barrel, quick change spring system and 18:1 steel gears running on 8mm slide bearing bushings, giving you a head start over other cost-effective AEGs when it comes to internals and performance. Whether you are working on a Soviet-Afghan War loadout or you want a lightweight AK for your rebel/OPFOR kit, the S&T AKS-74N will keep you light on your feet and get the job done down range!
- Preinstalled MOSFET
- Full Diamondback Licensing
- M-LOK Handguard
This BO Dynamics DIAMONDBACK DB15 AP305 7" M4/AR-15 AEG is a lightweight and easy-to-use rifle, it is constructed from a high-density polymer that is scratch-resistant. It also features a preinstalled Helios muzzle attachment that can be removed. This package also includes an 11.1V crane battery, a balance charger, a grip and 2x 20mm Picatinny rail sections. This is a brilliant deal for new players as it includes everything they could possibly need in one package.
This AEG is also equipped with a MOSFET and ETU with programmable firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes and the preinstalled MOSFET will protect your rifle from short circuits and burnouts.
If you're a fan of staying light on your feet, sneaking up on the enemies and generally causing mayhem on the battlefield, then the BO Dynamics DIAMONDBACK DB15 AP305 7" M4/AR-15 AEG is perfect for you and your playstyle!
- Thumbhole Stock
- Removable Bipod
- AR36 Magazine Compatible
A 6mm BB Airsoft Electric Gun, based on a customised variant of the AR36K designed for use as a Marksmans rifle.
- Full metal construction
- 14.5" KeyMod handguard
- Silent piston and cylinder head
If you are looking for something to keep heads down at an outdoor skirmish, or something to upgrade to a DMR in the future, the CM.068D is perfectly suited to the task! This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. This rifle is a few choice upgrades away from DMR capability, but performs surprisingly well as it is!
- Army Armament KU901 AEG
- 2x Mid-cap mags, speed loader & BBs
- Battery, charger & Holo-551 red dot sight
If you want to stand out from the M4-wielding hoards, why not try an AUG? The Army Armament Ultimate AUG Bullpup Bundle includes everything you need to get stuck in with this legendary Austrian platform in its modernised form!
The set includes the Army Armament KU901 Steyr Aug AEG, 2 extra mid-cap magazines, a 100rnd Speed Loader, a 4000rnd bag of Kalashnikov 0.25g BBs and a 551 style Red Dot sight. Also included is a Ni-MH battery, charger, and safe charging bag. Take a walk on the wild side with an exciting and lesser seen platform!
- Electronic Trigger
- ARES EFCS Gearbox
- PEQ Battery Required
A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.
- Electronic Trigger
- ARES EFCS Gearbox
- PEQ Battery Required
A Rifle length 6mm Airsoft Gun, based on the widely used M4 with the suppressor on this airsoft weapon is sunk into the rail system to give it a unique look.
- Full metal construction
- Ares EFCS programmable gearbox
- Licensed FN Herstal trademarks
If you are a fan of the SCAR platform but you prefer to play CQB the Cyber Gun SCAR-SC has your name on it! The SCAR-SC is the Subcompact variant of the original FN SCAR MK16 rifle which was designed to replace the M4A1 in special forces service. The SCAR-SC boasts a shorter front end than the original SCAR, and a super compact sliding PDW stock, making it a fantastic tool for clearing tight corners when things get up close and personal.
The SCAR-SC has a CNC machined Aluminium upper receiver and a polymer lower receiver with ambidextrous controls, just like the real thing. Inside we are treated to an Ares EFCS gearbox and a slim type motor, resulting in a snappy trigger response and granting the ability to program burst modes with the Ares EFCS programmer. If you want a SCAR that can keep up with M4 PDWs in CQB, this is the only one!
- Full Starter Set - Everything you need to skirmish
- M4/AR-15 Silent Ops 8 AEG, Goggles, Face Mask & Plate Carrier
- Red Dot sight, 2 spare mags, BBs, Battery, Charger & Charging bag
If you want to get into Airsoft skirmishing but don't know where to start, start here! The Delta Armory CHARLIE™ Full Starter Pack includes the DA-B04, a lightweight, pre-upgraded M4/AR-15 AEG with a sneaky style, two additional mid-cap magazines and everything else you need to get busy in game!
The set includes the DA-B04, 2 extra 120rnd Mid-caps, a Tactical Vest, a pair of NUPROL Pro Mesh Goggles, a NUPROL Tactical Half Face Mask, a speed loader, Kalashnikov 0.25g BBs, a Ni-MH battery, charger & a Battery charging bag; giving you everything you need to get off to a flying start on your Airsoft adventure. We recommend a Gun Bag or Hard Case to transport your pride and joy and some good footwear, but other than that, you are good to go!
- Full metal construction
- 6.04mm Tightbore inner barrel
- Tokyo Marui ZET system based internals
If you like an aggressive military-style AR, the CYMA CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!
Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.04mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!
- Full metal construction
- Ares E.F.C.S inside (set to full auto)
- Includes suppressor, scope & mount!
Looking for the base gun for your Airsoft DMR build? The Ares AR-308 series is uniquely equipped for this role, being patterned after real steel AR-10 battle rifles, the M4/AR15's big brother. The AR-308 series are built to dominate, being kitted out with a high torque motor, quick change spring system, the Ares EFCS trigger unit, and a rotary HOP-up unit with the opportunity to lock the AEG to semi, either using an Ares programmer unit or mechanically by installing a replacement selector lever if you want to build the inside of the AR-308 to suit the DMR styling of the externals.
The AR-308M is the mid-length offering in the AR-308 line and makes use of a 12.5-inch outer barrel with a 12-inch M-LOK handguard, and the unique Ares Pro stock, offering 5 positions of adjustment. This AEG's external build quality is exceptional, with razor-sharp machining throughout and a beautiful matt metallic bronze finish applied. We aren't sure what is more impressive; the high-quality feel of this AEG or its exceptional trigger response and rate of fire, which our fingers cannot outrun on a 7.4V LiPo!
- Full metal construction
- Highly accurate platform
- Great for Vietnam re-enactment, or a DMR
If you have been on the lookout for an affordable starting point for a DMR build project, or you are working on your Vietnam war or Blackhawk Down loadout, the JG1401 will be of interest! This M14 AEG sports full metal construction, and is patterned after the superb Tokyo Marui M14 AEG with its excellent "V-HOP", extremely long barrel and marksman rifle style good looks.
Looking to up your Airsoft game? Our huge selection of Airsoft assault rifles mean you can find the perfect new primary without worry. From all-round favourites, such as our AK variants to our powerful SMGs. For history buffs and reenactors, you can shop our fantastic selection of classic era Airsoft guns.
With a variety of pieces to choose from, you can browse everything from beginner guns to those for advanced skirmishers. You can also shop our full metal assault rifles, as well as gas, electric and HPA rifles. Why not try out some of our favourite choices? Our G&G armament range offers rifles to suit all styles, or you can shop the CYMA rifle range which are great for beginner and regular players alike. Can’t find what you’re looking for? Shop our full selection of Airsoft guns.
At Patrol Base, we know what it’s like to want to get into the game as soon as possible, which is why we offer next day delivery. We also have interest free finance plans so you can buy your airsoft assault rifle today, receive it tomorrow and pay later. We even offer a price match guarantee so you know you’re getting the best value.
Shop our full collection online or visit us at our store in Huddersfield.