All Airsoft Assault Rifles

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL¹ version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET or HAL MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

If a DMR is on the cards, the Delta Armory DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG is a fantastic choice on which to base your build! Boasting full metal construction and plenty of pre-upgraded internal parts, this M4/AR-15 AEG platform is rocking a lengthy 16-inch outer barrel, giving it the appropriate looks to suit a DMR build.

To make matters all the sweeter, the inner barrel is a 6.03mm tightbore measuring 420mm in length and the pre-installed EAGLE MOSFET allows you to program the trigger for semi-automatic only. Coupled with its quick-change spring system, the TEMPEST 2 is probably one of the easiest DMR conversions out there! Amongst the EAGLE's other tricks, we have the option to use burst modes of various durations, binary trigger, sniper delay, AUG mode, pre-cocking, trigger sensitivity and active braking.

For any long-range oriented build, the DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG would make a fantastic starting point but is already very well equipped to compete as it comes. If you're seeking a longer platform for outdoors work and want some advanced features thrown in for a remarkable price, the TEMPEST 2 is your best bet!

If a DMR is on the cards, the Delta Armory DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG is a fantastic choice on which to base your build! Boasting full metal construction and plenty of pre-upgraded internal parts, this M4/AR-15 AEG platform is rocking a lengthy 16-inch outer barrel, giving it the appropriate looks to suit a DMR build.

To make matters all the sweeter, the inner barrel is a 6.03mm tightbore measuring 420mm in length and the pre-installed EAGLE MOSFET allows you to program the trigger for semi-automatic only. Coupled with its quick-change spring system, the TEMPEST 2 is probably one of the easiest DMR conversions out there! Amongst the EAGLE's other tricks, we have the option to use burst modes of various durations, binary trigger, sniper delay, AUG mode, pre-cocking, trigger sensitivity and active braking.

For any long-range oriented build, the DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG would make a fantastic starting point but is already very well equipped to compete as it comes. If you're seeking a longer platform for outdoors work and want some advanced features thrown in for a remarkable price, the TEMPEST 2 is your best bet!

An electric-powered Airsoft Gun that offers a crazy high rate of fire - far better than most out of the box Guns. It achieves this with a high speed motor and a 13:1 ratio gearset. If you're looking for an incredible project gun or you're sick of being on the back foot at Airsoft skirmishes, then the High Speed Series CM.011 will seriously up your game.

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

Whether you are a Novritsch fan or simply appreciate a lightweight, performance-oriented AR platform you must be dying to get your hands on the SSR4! This M4/AR-15 platform Airsoft gun has been designed by Novritsch's team in Austria to provide the accuracy, range, and rate of fire to dominate an Airsoft skirmish if you have the skills to back it up!

This version of the SSR4 is the polymer version, constructed with a high density polymer handguard and receiver to keep the platform light and agile while boasting the same phenomenal pre-upgraded internal feature set of the full metal version.

Inside, you will find a 6.03mm tightbore inner barrel, rotary HOP-up unit, reinforced version 2 gearbox with CNC steel gears, a steel quick change spring guide and of course, the pre-installed MOSFET trigger system which allows for programmable fire modes, adjustable pre-cocking and also provides a boost in ROF and trigger response. If you are looking for an Airsoft AEG platform to help you reach your peak of Airsoft gameplay, this could be the one!

A new electric 6mm airsoft rifle made by NUPROL as a budget entry level RIF but without compromising on quality, and is constructed from polymer this weapon is light weight but tough enough to handle the rigors of an airsoft skirmish. The gun is available in a variety of colours allowing you to pick the perfect gun to match your kit.

The gun features plenty of rail space for attaching aftermarket external parts for customisation, with plenty of options for upgrades available this gun simply cannot be ignored.

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

This lightweight and incredibly effective Airsoft Electric Gun is powered by a Battery in the Stock, and features Double Eagle's Fire Control System, which allows for programmable Trigger Modes (including Binary Fire), as well as giving you excellent Trigger Response. The package is completed by a Quick Change Spring System, making it suitable for just about any field! If you want to be light on your feet and as effective as all the 'modded/custom guns' without having to break the bank, the Double Eagle M904 Falcon Fire Control Series are the perfect choice.

If you love the standard issue US Army M4A1 carbine, this should suit you! The Delta Armory DA-C03 CHARLIE™ M4A1 RAS AEG is styled after the M4A1 as it is issued to the US Army, featuring a RAS style quad 20mm railed handguard, M4A1 barrel profile with M203 cutout and the iconic AR-15 triangular front sight, along with some thoughtful modern ergonomic enhancements to improve handling.

On the outside, Delta has added a gunfighter mod.3 style ergonomic pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C03 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight and maintain peak agility in game.

On the inside, the DA-C03 is kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. Needless to say, this platform is superb value considering its features and is the perfect AEG for a new skirmisher who wants a cost-effective primary without any performance compromises!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

Custom external components come together to create one unique looking M4. Constructed from tough, but lightweight polymer, the M4 is a solid platform, supported by many systems and featuring a highly customisable top rail, which in total is 21'' in length, there are a huge array of options to customise this AEG.

With this rifle being on the longer side, it's a perfect entry level custom M4 for skirmishing outdoors and taking out longer range targets.

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you are working on your Special Forces loadout but you haven't had time to hit the gym, Delta Armory has the MK18 for you! The DA-B15-ETU BRAVO™ is styled to match the real MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but is far lighter and handier than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high density polymer receiver and buffer tube.

Inside, this MK18 MOD.1 is rather special, being fully upgraded internally with little room for more. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. If you want the looks of the MK18 without the weight, the DA-B15-ETU BRAVO™ brings the MK18 styling along with incredible performance!