All Airsoft Assault Rifles

Attention all sneaky skirmishers! The Specna Arms SA-A07 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is exactly what you are looking for, with its integral suppressor, it really doesn't get more covert than this. This platform also boasts full metal construction, making it hardwearing and sure to last in even the roughest of skirmishing conditions.

Inside the Specna Arms SA-A07 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you're into the "Honey Badger" look, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU will definitely please you! Boasting full metal construction and an integral suppressor surrounded by a CNC aluminium M-LOK handguard, the CM.097D is rocking all the superb pre-upgraded components CYMA's Platinum series is known for with a more compact form and stealthy styling, ideal for CQB or fast moving, clandestine skirmishers!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

With top tier pre-upgraded internals and solid externals with a cutting edge aesthetic, the CM.097D is a beast in all aspects and its compact size lends itself well to fast moving, aggressive playstyles and close quarters environments. If you need a modern, full metal AR which will never need upgrading, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU is the one to go for!

Forget what you know about the AR36 platform, this 1990s space gun has been revamped for 21st century warfare thanks to Novritsch! The SSR63 A2 is Novritsch's reimagining of the AR36K platform, boasting the same advanced ergonomics as the original platform with a new CNC machined aluminium M-LOK/20mm Picatinny hybrid handguard and 20mm top rail, providing extra strength when compared to the original configuration and keeping things in line with other cutting edge platforms.

On the inside, the SSR63 A2 is equally impressive, boasting a high torque 24K RPM motor combined with a programmable ETU/MOSFET which offers binary trigger, burst mode, pre-cocking and several other less exciting but equally impressive and essential functions to ensure smooth running reliability in the long term. The HOP-up unit is CNC machined for extra precision and a flawless air seal and the HOP-up bucking is provided by Maple Leaf and has a flat contact surface to enhance accuracy and range. This combination of fantastic pre-upgraded internals and a forward-thinking external redesign make the SSR63 one to watch on the skirmish field!

If you're getting bored of the usual M4-shaped AEGs, who can blame you? The Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG makes a nice change, boasting full metal construction and licenced trademarks from FN Herstal. Like the real thing, this detailed SCAR replica features ambidextrous fire controls, a monolithic upper receiver made from a single block of aluminium and an advanced multi-adjustable stock offering length of pull adjustment, an adjustable cheek riser and side folding functionality. Make no mistake, this is one of the best SCAR replicas out there when it comes to external quality!

Internally, the SCAR-L is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If you're dreaming of a beast of a SCAR build and want the best externals around, start with the Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG!

If you've been holding your breath waiting for KRYTAC's MK3 line to drop, you can breathe a sigh of relief! The KRYTAC EMG BARRETT REC7 MK3 Carbine AEG is the latest REC7 platform release, maintaining the incredible external build quality which made them the base platform for Bolster Armouries incredible ONYX with newly refined internals to squeeze even more performance from KRYTAC's proven components!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you want a modern AK variant but you want it light for a fast moving playstyle, this one will do the trick! The SA-J72 from Specna Arms is designed to replicate the real steel AKS-74M, a modernisation of the AKS-74, the original side folding AK rifle. This AK uses the VFC style of external construction, meaning pins and rivets instead of screws, a skeleton side folding stock made from steel and as close as is possible to realistic disassembly with an AEG.

The SA-J72 weighs a mere 2.5kg approximately, and Specna gets away with this with a high density polymer receiver, gas tube and gas block which has the added benefit of increasing the rifle's resistance to scratches. We have been waiting for a modern AK in the featherweight category, and finally, it is here!

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

Specna Arms are at it again with an Airsoft replica of the AR36, a lightweight rifle featuring electric blowback no less, giving you a satisfying recoil with every shot and giving you that added realism.

The SA-G12 comes ready to rock straight out of the box, boasting 3 front handguard 20mm rails and a raised top rail for tactical accessories as well as a side folding stock for CQB use and fully ambidextrous controls. A rough and ready AEG for both new and veteran players alike!

If you're after an Airsoft AEG with an iconic military look, the Specna Arms SA-C03 CORE™ HAL¹ ETU M4A1 AEG is a great budget-friendly option! A detailed replica of the US Army's M4A1 rifle, the SA-C03 is made predominantly from high density polymer with an alloy outer barrel and CNC aluminium handguard, resulting in a lightweight build with strength and accessory compatibility where it counts!

This, the latest version of the SA-C03 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the already respectable original SA-C03. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

Whether you're after a low-cost, versatile base gun for a custom build or a US Army primary for an unbeatable price, the Specna Arms SA-C03 CORE™ HAL¹ ETU M4A1 AEG is ideal. Ready to be dressed up like the real thing with plenty of accessory options, including the M203 Grenade launcher, this M4A1 is adaptable and authentic in equal measure!

A Polymer and Alloy replica of an Austrian favourite! The Bullpup design allows for a very long inner barrel in a more compact package, offering you long-range performance in a medium-sized and ambidextrous bundle.

If you're in search of a close-quarters-optimised M4/AR-15 AEG on a budget, you've found one of the best options with the DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG from Delta Armory! A lightning-fast density polymer build with an alloy outer barrel and steel sling plate, the DA-C14-EGL is also rocking the EAGLE™ programmable MOSFET inside, giving it advanced functionality way beyond its price point!

Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the DA-C14-EGL far more long-range effect on target than one might expect for such a compact primary!

If you like to move fast and need a platform to match or you're a CQB specialist needing to cut tight corners, you're in great hands with the Delta Armory DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG at your side. Packed with pre-upgraded parts and based on Tokyo Marui's proven internal design, the DA-C14-EGL is affordable, reliable and ready when you are!

Based on the iconic Steyr AUG carbine, this compact 6mm BB Airsoft gun is a lightweight and compact electrically powered replica AUG. Realistically constructed from polymer with an alloy front end, the AUG is supplied with an aluminium foregrip.

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

The SA-C07 CORE™ Gen.2 M4/AR-15 AEG is the latest, most advanced entry-level AEG from Specna Arms, equipped with many parts from the top-end PRIME™ series for more bang for buck than ever before! It features an entry-level price point, with a veteran-level pre-installed ETU, enhanced gearbox and upgraded HOP-up unit, straight out of the box. The AEG is also compatible with most Tokyo Marui V2-spec aftermarket upgrade parts, so it really is future-proof!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-C07 CORE™ Gen.2 M4/AR-15 AEG is one to watch!

The SA-C07 CORE™ Gen.2 M4/AR-15 AEG is the latest, most advanced entry-level AEG from Specna Arms, equipped with many parts from the top-end PRIME™ series for more bang for buck than ever before! It features an entry-level price point, with a veteran-level pre-installed ETU, enhanced gearbox and upgraded HOP-up unit, straight out of the box. The AEG is also compatible with most Tokyo Marui V2-spec aftermarket upgrade parts, so it really is future-proof!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're looking for a beginner AEG which is a cut above the rest, the Specna Arms SA-C07 CORE™ Gen.2 M4/AR-15 AEG is one to watch!

If you need a compact AR for CQB or a sniper's backup, the DA-B16-EGL BRAVO™ TALOS 1 PDW M4/AR-15 AEG is ideal. This beastly little AR is lightweight and extremely compact, making it ideal for fast movers and those who need a backup platform with more firepower than a pistol. Inside, the TALOS 1 has some exciting features as a bonus, giving you far more bang for your buck than its rivals!

The Delta Armory EAGLE™ programmable MOSFET is the cherry on top of a superb external build, offering the option of burst mode, binary trigger, semi-auto only, sniper delay, progressive trigger (AUG mode), precocking and trigger sensitivity adjustment. A seriously advanced bit of kit, the EAGLE™ allows you to program all of these modes using the trigger and fire selector only, with no need for apps, programming cards or other hidden costs! Also inside is a 6.03mm tightbore inner barrel, rotary HOP-up unit and the usual Delta Armory compliment of SHS reinforced internals. 

Delta's gift to those struggling with longer platforms in CQB, the TALOS 1 gives you ultra-modern externals, well-equipped internals and the perfect balance between low weight and the satisfying realism of metal parts. If you need a primary that won't slow you down with plenty of programmable fire mode options by default, the DA-B16-EGL BRAVO™ TALOS 1 PDW M4/AR-15 AEG is the one!

The Italian brand Evolution Airsoft has made a name for itself by providing pre-upgraded AEGs with superb quality externals, giving Airsofters what we always wanted; a gun we don't have to mess with! Though some live for the "thrill" of installing upgrades and hoping they work, for the rest of us, Evolution Airsoft has come through once again! The Smart Airsoft Gun series features the same impressive internals and rock solid externals as previous Carbontech AEGs, but with the new and improved ETS II installed. This AEG is the XS version of the Ghost EMR with the Evolution Airsoft PDW stock installed, making this the most compact offering in the Ghost EMR range and would be a great choice for those looking for a small Airsoft gun that is easy to transport but doesn't compromise on performance.

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

If a lightweight, low-cost M4 AEG with a practical and tactical feature set is on your to buy list, the S&T M4/AR-15 URX4 9.5" Sports Line AEG; ETU Version fits the bill! Made from strong high density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, the URX4 9.5" AEG is extremely fast to point and easy to move with, rocking an M-LOK handguard and 20mm railed receiver, ready to be dressed up with accessories.

On the inside, the S&T URX4 9.5" features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. This updated version now also features an in-line MOSFET and low-resistance wiring, giving it improved electrical efficiency and a super snappy trigger response in semi-auto.

Ideal for mobile playstyles and new skirmishers with limited physical strength, the S&T M4/AR-15 URX4 9.5" Sports Line AEG; ETU Version really brings the heat to the low-cost AEG market. If you like to move fast and maintain high energy throughout the skirmish day, the S&T URX4 9.5" Sports Line is your ideal primary!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high-density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. This, the latest "Gen.2" variant, has been revamped internally with premium parts, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're after a proven platform with a lightweight exterior and pre-upgraded internals, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG fits the bill!

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high-density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. This, the latest "Gen.2" variant, has been revamped internally with premium parts, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you're after a proven platform with a lightweight exterior and pre-upgraded internals, the Specna Arms SA-C08 CORE™ Gen.2 M4/AR-15 AEG fits the bill!

If you're looking for a highly flexible M4/AR-15 platform, the Specna Arms SA-C20 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG should suit you perfectly! Kitted out with some glorious externals with a skeletonised M-LOK handguard, crane stock and railed receiver, this M4 is a great choice for any skirmisher! This, the latest version of the SA-C20, has been revamped to "Gen.2" internal standards, meaning more bang for your buck than ever before!

Specna's CORE™ Gen.2 pushes the featureset of affordable AEGs up a notch or two, equipped with the Aether™ enhanced gearbox shell and Magnus™ TDC Rotary HOP-up unit from the PRIME™ series. Also on board is the Aether™ CNC aluminium nozzle and Helium™ HOP-up bucking, boosting accuracy and range considerably. The HAL programmable ETU is the icing on the cake, offering a wide range of programmable fire modes, from 3-round burst to binary trigger, semi-auto only and much, much more!

Also present is Specna's usual 6.03mm tightbore inner barrel, polymer piston with full steel tooth rack and ESA quick-change spring system, making power tuning a breeze. If you need a mid-length platform with a high-quality yet lightweight build ready for any challenge on the field, the Specna Arms SA-C20 CORE™ Gen.2 M4/AR-15 AEG is the way to go!

This is not an AK, I repeat this is not an AK variant! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the Delta Armory DA-VZ58 CSA VZ.58 "Kosa" AEG features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.