All Airsoft Assault Rifles

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

If you're all about full metal ARs with an ultra-modern exterior, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is one to watch! A revamped version of the original Platinum CM.097F, this version keeps the ultra-speedy pre-upgraded gearbox internals of the original and adds advanced functionality into the mix via the pre-installed EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

A pre-upgraded AR AEG for cutting corners tight up close, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is a solid choice for CQB players or those who appreciate a compact build with superb handling. With a trigger response which is hard to beat, compatibility with 11.1V LiPo batteries and high-speed internals refined with the addition of the Kestrel Basic ETU, this latest CM.097F is CYMA's gift to the CQB specialist or fast moving woodland warrior!

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well.

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

If you're just starting your Airsoft journey and looking to get involved without spending too much, you're in safe hands with the CYMA CM.513 M4 SD RIS AEG! A proven platform made even better in its latest iteration, the CM.513 is part of CYMA's "Sport" line, rocking a lightweight and handy build with no performance compromises, ideal for those with less physical strength or those who like to conserve energy!

The alloy version 2 gearbox inside the CM.513 is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

Externally, the CM.513 is inspired by real-world integrally suppressed M4/AR-15 rifles designed for stealth in a close-quarters environment. The handguard is a 20mm Picatinny quad-railed example, ready for vertical or angled grips, lasers or tactical flashlights. The receiver is also railed and ready for a red dot sight or scope but comes with flip-up iron sights to get you started. If you've been searching for an affordable, reliable and well-equipped Airsoft primary for your first foray into the sport, the CYMA CM.513 M4 SD RIS AEG is one of the best options out there!

If you're just getting into Airsoft and don't want to break the bank, our CM.513 M4 SD Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.513 M4 SD, a 1KG Bag of 0.25g BLS BBs, a 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

If you plan to get into Airsoft but don't want to overspend on your first replica, our CM.520 AK-47 PMC Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.520 AK-47 PMC, a 1KG Bag of BLS 0.25g BBs, a 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

Airsoft 6mm BB Gun built by CYMA in China to replicate the American M14 Rifle. The weapon features full Alloy Internals, Receiver and Barrel, with a Polymer Stock and Heat Shield.

An Electric Airsoft rifle based on the world famous and seemingly timeless AK47, now updated with a more practical, and tactical configuration! Complete with a side folding stock, folding vertical foregrip and handguards sporting 20mm Picatinny rails, the CM.028U is perfect for PMC impressionists, and those who want something with rails which isn't an M4!

If you're just getting into Airsoft and don't want to break the bank, our CM.506 M4A1 CQB SD Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.506 M4A1 CQB SD, a 1KG Bag of 0.25g BBs, a 9.6v 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

A modernised AK-74 6mm Airsoft AEG Replica, with a ergonomic polymer Hand Guard, Moulded Grip and folding Solid Stock. The Rifle is constructed with an Alloy body, with Polymer Hand Guard, Grip and Stock.

If you're getting into Airsoft on a tight budget, our AR-15 Carbine Beginner Bundle is ideal! This set includes the CYMA Sport CM.515 AR-15 Carbine, a 1KG Bag of 0.25g BBs, a 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA MOSFET Edition line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a type 1 cylinder and a polymer piston with a full steel tooth rack. Tying this selection of high-end internals together is the CYMA Zeus MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!

An Airsoft 6mm BB Gun, designed and built to look and be a functional replica of an AK74 Assault Rifle, but also features more modern body parts. The rifle is constructed mostly from Alloy, with an Alloy Receiver, Top Cover, Barrel, and Stock with Polymer Hand Guard and Grip.

If you're just getting started on your Airsoft adventure, our CM.507 M4A1 Beginner Bundle was made for you! This set includes the CYMA Sport CM.507 M4A1 Carbine, a 1KG Bag of 0.25g BBs, a 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

If you're looking for a full metal AR with modern styling, the CYMA Platinum CM.097B M4/AR-15 AEG; Kestrel Basic ETU is a fine choice! Part of the newly revamped CYMA Platinum line, the CM.097B boasts the same reinforced high-speed internals as the original with the EShooter Kestrel Basic MOSFET added to the mix. 

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

Even better than the original when it comes to downrange effect while maintaining the superb external quality CYMA Platinum is known for, the CM.097B is a fantastic intermediate option with sleek modern styling and plenty of pre-upgraded parts. If you're ready to let rip with a cutting-edge full metal AR, the CYMA Platinum CM.097B M4/AR-15 AEG; Kestrel Basic ETU is calling your name!

If you want to get started in the sport and hobby of Airsoft, our CM.508 M4 S-System Beginner Bundle is one of the most affordable ways to do it! This set includes the CYMA Sport CM.508 M4 S-System, a 1KG Bag of 0.25g BBs, an 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of NUPROL Pro Mesh Goggles.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*

If you love your Russian platforms but are not stuck in the past, the CYMA CM.039C AK-47 Tactical AEG Rifle should definitely interest you. This beast is constructed using a lot of steel components to help provide an extremely realistic weight. It comes equipped with a foldable foregrip, so you can take down your opponents with precise handling whilst on the battlefield.

Inside, you'll find a 6.03mm tightbore inner barrel which provides some extra power and accuracy when sending BBs down range. The gearbox is a version 3 fitted with 18:1 steel gears running on 8mm ball bearing bushings, a tried and trusted formula guaranteeing consistency. If you're searching for an ultra-modern tactical AK replica to live out your tactical fantasies, the CYMA CM.039C AK-47 Tactical AEG Rifle is one to watch!

If you need a new primary for outdoor skirmishes,  the CYMA CM.098 SR-25 DMR AEG; Kestrel Basic ETU is a great shout. Boasting full metal construction, a pre-installed QD suppressor and CYMA's Platinum E-Edition internals, the CM.098 has the beastly 7.62x51mm styling a proper DMR platform deserves!

Inside, you'll find a version 2 long gearbox equipped with 8mm solid bushings, a CNC machined aluminium silent piston head and cylinder head set, a polycarbonate piston with a full rack of steel teeth, a ball bearing quick change spring guide and a high torque Neodymium magnet motor. The inner barrel is also a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the parts you need to do your dirty work at long range. 

The Kestrel Basic ETU is the perfect finishing touch, offering programmable fire mode options including 3-round burst and binary trigger along with 5 levels of adjustable pre-cocking; allowing you to tune the trigger response to perfection. If you're in search of a DMR base gun or a big-boshing rifle for woodland warfare, the CYMA CM.098 SR-25 DMR AEG; Kestrel Basic ETU is a great choice!

The CM.009C MOSFET Edition is an M16 platform Airsoft Electric Gun replica of the A1 variant, which saw heavy use in Vietnam. Much like the CYMA Platinum series, this AEG features a MOSFET and Electronic Unit that makes a serious improvement on trigger response, which is really the only thing you could complain about on the previous model. It also features a Quick Change Spring for quicker and easier Main Spring changes; very helpful if you play at multiple sites with different power limits. If you're looking for either a period accurate Airsoft Gun or you're looking for your first rifle, this is a seriously strong contender.

Stylish modern AKs are a gorgeous way to take your Russian loadout into the 20th century! The CYMA CM.113B AKS-74U Zco Custom AEG is a compact powerhouse designed to dominate the battlefield and look good whilst doing so. This beast boasts full metal construction with a hefty steel receiver along with flawlessly machined external enhancements inspired by real steel Zco parts. With a dynamic and individualistic style, the CM.113B is perfect for any contemporary AK-themed loadout!

Internally, we're treated to CYMAs high-speed E-Edition internals, including 13:1 high-speed CNC steel gears running on 8mm ball bearing bushings, a polymer piston with a full steel tooth rack, a CNC aluminium piston head and cylinder head, a high-speed Neodymium magnet motor, low-resistance wiring and a 6.03mm tightbore inner barrel. Also inside is the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

So, if you're keen on a modern Russian loadout or you like the one-of-a-kind Zco style, the CYMA CM.113B AKS-74U Zco Custom AEG; Kestrel Basic ETU should be just the platform for you, plus, its compact but highly adjustable design makes it great for pretty much any playstyle!

Looking for a lightweight yet functional M4 with a compact form for a run and gun play style? Fast movers on the skirmish field will love the CM.605 for its perfect balance of polymer and alloy parts, providing a robust and solid M4 platform with remarkably low weight and superb handling. The CM.605 is an M4 AEG in CQBR configuration, matching military M4s with shortened barrels for close-quarters work. 

A well built and well thought out Airsoft Electric replica of the AR-10 platform, which offers tough construction and a wealth of top-tier features such as a Quick Change Spring, Microswitch Trigger, MOSFET and other high-quality internals to make this perfect for beginners and experts alike.

A well built and well thought out Airsoft Electric replica of the AR-10 platform, which offers tough construction and a wealth of top-tier features such as a Quick Change Spring, Microswitch Trigger, MOSFET and other high-quality internals to make this perfect for beginners and experts alike.

If you ever wanted to light the enemy up with tracer BBs but don't like the looks of a suppressor, the CYMA Platinum SLR Airsoft Works AK-74 AEG is your dream come true! This pre-upgraded AK AEG is officially licenced by SLR Rifleworks and boasts a full metal build with plenty of steel, CYMA's impressive E-EDITION High Speed internals and a tracer unit integrated into the HOP-up unit, meaning you don't need to add length or weight with a tracer unit to get an instinct aiming advantage in CQB or low light skirmishes.

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-74 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

Whether you seek a modernised AK to add to your arsenal or you are smitten by the sound of a built-in tracer unit, the CYMA Platinum SLR Airsoft Works AK-74 AEG will make your day with its thunderous rate of fire, superb long range accuracy, flawless build quality and now, programmable fire controls!

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

If you're looking for a solid, modern M4/AR-15 AEG fitted with some of the best stock internals out there, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU is one to watch! The latest version of the original CM.097, this version is equipped with the EShooter Kestrel Basic ETU, the perfect compliment to its thoroughly upgraded Platinum E-Edition internals!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

On the outside, the CM.097A is very well equipped, ready to host M-LOK or 20mm Picatinny accessories and equipped with a 14mm CCW male threaded outer barrel, ready for your tracer unit or suppressor. If you like the sound of a solid, proven high-performance M4/AR-15 AEG made even better with advanced, programmable firemodes, the CYMA Platinum CM.097A M4/AR-15 AEG; Kestrel Basic ETU will suit you perfectly!