Airsoft Attachment & Accessory Discounts

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

The WADSN DBAL Mini is a compact laser aiming module with two fully adjustable lasers combined into a single unit! The DBAL-Mini from WADSN provides both a red visible laser and an IR laser which is only visible under night vision, both of which are zeroed together with common tool-less adjustment dials. This DBAL-Mini is the much sought after aluminium version and boasts more realistic construction than its polymer counterparts. If you own night vision of any kind, this laser is a must!

If you've had a cut-off lever failure or you like to keep parts on hand just in case the worst happens, the G&G Armament Cut Off Lever For V2 Gearbox is perfect. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

The cut-off lever is a piece that sits between your trigger and sector gear and serves to interrupt or disconnect the trigger once your gearbox has made a complete cycle, very useful!

Next level of Airsoft sniper rifle hop-up rubber produced with similar materials and processes to Madbull's current line up of AEG hop-up components.

A replacement original KRYTAC part which fits version 2, 3, 6 and 7 gearboxes. This cylinder is a Type 1, meaning it has a port in the side intended to reduce the air volume for use on short barrelled platforms (<363mm inner barrel) and prevent the "suck back" phenomenon.

If you need a battery for a fixed stock or other large battery compartments this one should fit the bill! The 7.4V 1800mAh 20C Block LiPo Battery from Electro River is the perfect battery for full stocks found on M16, AK, SMG-5 and G3 Airsoft AEGs. The battery measures 10 x 1.2 x 3.5cm approximately with a wire length of around 9cm and is pre-wired to a mini-Tamiya battery connector.

The battery is a 7.4V 2-cell battery in block configuration with a continuous discharge rate of 20C and a maximum discharge rate of 40C, making it great for almost any Airsoft AEG, though make sure you measure before ordering!

This battery features a wider and flatter butterfly style configuration and while it won't fit in crane stocks it is perfect for larger areas such as AR36 handguards and full stock rifles. The battery has a voltage of 7.4v, a capacity of 1500mAh and a continuous discharge rate of 20C with a maximum discharge rate of 40C. The battery is connected to your AEG via the Mini-Tamiya connector, not to be confused with a Deans connector, however adaptors are available.

The battery consists of two cells working in tandem with each other, with each cell measuring 8.5x0.6x3.4cm with a cable length of roughly 9cm.

A spare or replacement 50rnd short magazine for the Krytac Kriss Vector, which is made to a high standard with excellent quality Polymers, and features the KRISS trademark as well as faux round count.

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

With the NUPROL 1200rnd Electric drum magazine, you will have all the firepower necessary to deal with the foes on the battlefield. A massive drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to push back any opponents who dare challenge you.

This drum magazine is constructed from high-density polymer and is the first of its kind for the NGRS system! If you miss the mega capacity of a high-capacity wheel-wound magazine, this is leagues above that. More BBs, more hits... right?

Please note, this drum magazine is ONLY compatible  with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

The Angry Gun QDC 3-Prong Flash Hider matches the design of real steel flash hiders such as the ones found on AUGs. It is constructed from steel making it extremely durable and sure to withstand any skirmish. This muzzle device is designed to work with other Angry Gun QDC attachments such as their suppressor and tracer unit. These products interlock seamlessly guaranteeing a reliable attachment every time.

This flash hider mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. It also has a grub screw so you can ensure it is securely attached to your replica with no worries about it coming off. The flash hider also comes with a stainless steel shim, to make sure that it is situated perfectly on your rifle's outer barrel.

If you want a super realistic flash hider that is compatible with Angry Gun QDC suppressors and tracers, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

An AEG cylinder head for version 2 gearboxes found in M4/AR15 AEGs and SMG-5 AEGs. This KRYTAC part features a dampening pad, intended to reduce the noise from the piston impacting the cylinder head and give you a smoother sounding gearbox. The cylinder head is constructed from high density polymer with a brass inner nozzle and a rubber dampening pad.

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

A replacement or upgrade air nozzle for Airsoft electric SMG-5Ks.

A 6mm BB Airsoft magazine, designed for use with Tokyo Marui's SMG-7 AEP electric Airsoft Submachine gun, featuring a medium capacity of 50 rounds. 

A green gas magazine designed for the ICS BLE-XFG range of pistols. Holds up to 19 rounds

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

A blister pack of 10 x 1.5v Lithium button batteries that are commonly used in Airsoft sights, scopes and other accessories.

This is an Aluminium constructed Muzzle Device that is designed for AK Platform replicas, but will fit and work with any Airsoft Gun that has a 14mm CCW Threaded [Male] Outer Barrel, which is 95% of replicas.

This is one for the AK lovers! The Russian Firearm Fanatics and the Weekend Gopnik Operators, here to complete the tactical aesthetic of your AK is the 5KU PT-3 Telescopic Stock, featuring a full alloy construction and a rubber butt pad, this replica PT-3 Classica stock is a fine addition to your Eastern Operator loadout.

An efficient and well-constructed Air Nozzle which is available for a wide range of replicas, and ensures improved durability and smooth operation.

A series of Selector Plates from Modify, which are available for a range of AEGs.

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

A precision quality CNC aluminium replacement/upgrade trigger for your airsoft version 3 gearbox. If you need to replace a broken trigger, or you simply want to bling up your gun, then this is the answer!

If you like to be at the cutting edge of battery technology when it comes to Airsoft, you're going to want to check this out! The Gens Ace 7.4V 25C 1000mAh Airsoft LiPo Battery - Mini-Tamiya is a slim LiPo battery intended for Airsoft buffer tube battery compartments, AK top covers and other cramped spaces requiring a single cell group. The discharge rate is 25C, giving you a snappy response without risking overspin in most setups, and the capacity is 1000mAh, meaning you might need two to get through a full game day.

Where this battery differs from the norm is its Smart Balance Connector which interfaces with the Gens Ace IMARS Mini Charger, communicating the battery type and current charge levels and immediately commencing optimal charging as soon as this "Smart Battery" is connected. Compared to legacy smart chargers, this saves loads of time but unfortunately means that this battery cannot be charged using a standard LiPo balance charger.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.