Airsoft Helmets & Helmet Accessories

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs! 

The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you have a FAST helmet but don't run comms, we are sure you have taken a few painful shots through those massive openings around the ears. It sucks, we agree, but the solution is here! The FMA Protective Side Covers are constructed from high-density rubber and attach to the ARC rails on FAST helmets, protecting your ears whilst remaining flexible enough not to inhibit your head movement. The covers come as a set of two, just like your ears, and are the key to surviving CQB without taking painful ear shots.

These covers are sized to fit FAST helmet ARC rails and are unlikely to fit other helmets without modification.

If you want to protect your lower face, but would rather look like a real life future soldier than an Airsoft Skirmisher, the Helmet Mandible Guard from FMA has your 6! Constructed from high density polymer, this Mandible guard set protects your lower face, and mounts to any FAST type helmet via its ARC accessory rails. The angular, modern design of the Mandible guard gives it a sleek look, especially when mounted to a well-setup FAST helmet. The Mandible guard also folds up, making it easy to stash in your kitbag at the end of the day's skirmishing!

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

A lightweight LED Light Set suitable for providing close range Illumination or light for Airsoft. Constructed out of robust polymer and metal, this LED set is more than capable of taking bumps and knock during combat. 

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches. 

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches. 

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

If you're running an EXF helmet from EmersonGear or FMA, this helmet cover is the key to styling up your lid. The cover is constructed from mesh fabric, available in Multicam, Dark Earth and Black, complete with velcro so you can customise it with I.D or Morale patches. 

If you went for a black helmet and you find it stands out in the woods, grab a Multicam cover to help you blend in! Likewise, if you're rocking a tan or foliage green helmet and you want a more tactical look for CQB, slap a Black cover on that bad boy to change things up! 

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

If you're looking for a stylish cover for your FAST Maritime replica, the FMA Multifunctional Cover is a great shout. This helmet cover includes a built-in counterweight pouch, ideally suited to a strobe light, power bank or other small accessories. As with other helmet covers, the Multifunctional Cover includes loops for foliage and cable routing, Velcro panels for Morale andI.D patches and a cutout for the NVG mount up front. 

This cover is designed specifically for the FAST Maritime helmet cut and won't fit other FAST helmets like the PJ, Bump or Ballistic. If you operate in many different environments and like to change your camo to suit, this helmet cover can help you stay concealed and look fantastic while doing it!