Airsoft HOP-Up Rubbers

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you're building an AEG for maximum range, the Maple Leaf Monster HOP-up Bucking for AEG will be an asset to your objective. Designed with a diamond-shaped contact patch to increase surface contact with your BBs, the Monster is ideally used with heavy BBs (0.28g+) and provides increased HOP-up effect, especially when paired with an OMEGA or OHM HOP-up nub.

The Monster is available in a wide range of hardnesses, offering an option for any build objective, from CQB to DMR. Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and want to go from prey to predator, the Maple Leaf Monster HOP-up bucking belongs in your build!

If you need more range and accuracy from your Airsoft AEG, the 4UANTUM Friction Pro High-Performance AEG HOP-up Bucking belongs inside! This cutting-edge HOP-up upgrade set includes an HOP-up rubber/bucking with a uniquely shaped contact patch and an OMEGA-style flat nub, ready to be installed into any AEG-type HOP-up unit.

The Friction Pro bucking was developed over 2 years of rigorous testing and, since its launch, has taken the Airsoft world by storm. We've been extremely impressed by the performance of this bucking during testing, offering exceptional range and a remarkably tight grouping, a combination other buckings often compromise on.

With the ability to lift up to 0.48g BBs in its stride with 60-meter accuracy when set up correctly, the Friction Pro High-Performance AEG HOP-up Bucking from 4UANTUM is ideal for any long-range AEG setup but is especially potent in a DMR build!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you're looking for all-round improvements in your HOP-up performance, the Maple Leaf Macaron HOP-up Bucking is calling your name! Designed to fit Airsoft AEGs and enhance both accuracy and range, the Macaron boasts a flat diamond-shaped patch for greater contact area with your BBs, giving a "Flat HOP" style effect when paired with an OMEGA or OHM HOP-up nub.

When compared to the Monster HOP-up bucking, the Macaron's contact patch is slightly less prominent, designed to provide a balance between range and grouping size as opposed to the Monster's focus on pure range. Compatibility-wise, the Macaron should fit most Airsoft AEGs though some level of expertise is required for fitting and tuning. If you want tighter groups and more range, the Maple Leaf Macaron HOP-up Bucking for AEG will do the trick!

If you seek more accuracy and range from your AEG, a HOP-up upgrade is the first place to start! The PTS Syndicate MEC HOP-Up Bucking for AEGs; Twin Pack includes a black HOP-up rubber and a purple one, equipped with a bridge-style contact patch to minimise side-to-side deviation and maximise accuracy. 

The black HOP-up rubber is designed for 295-360 FPS builds, being made from 60-degree hardness rubber and the purple 70-degree rubber is intended for high FPS DMR builds hitting out at 360-460 FPS on a 0.2g BB. If you're the techy type with a build on the go at all times, the PTS MEC HOP-Up Bucking for AEGs; Twin Pack is a great set to have in the toolbox!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you're after more accuracy and range from your GBB pistol, VSR sniper rifle or GBBR, the 4UANTUM Friction Pro High-Performance VSR/GBB HOP-up Bucking is the key! This cutting-edge HOP-up upgrade set includes an HOP-up rubber/bucking with a uniquely shaped contact patch and an OMEGA-style flat nub, ready to be installed into any VSR sniper rifle, GBB pistol or VSR/GBB compatible GBBR HOP-up unit.

The Friction Pro bucking was developed over 2 years of rigorous testing and, since its launch, has taken the Airsoft world by storm. We've been extremely impressed by the performance of this bucking during testing, offering exceptional range and a remarkably tight grouping, a combination other buckings often compromise on.

Designed to perfectly centre your BB with each shot and lift up to 0.48g heavy-weight BBs, the Friction Pro provides positively epic long-range performance and is ideal for accuracy-focussed skirmishers who want impressive range without a wider grouping. Whether you're running low-capacity GBBR mags and need to make every shot count or you need your pistol to reach out and surprise the enemy team, the 4UANTUM Friction Pro High-Performance VSR/GBB HOP-up Bucking is what you need!

If you seek more accuracy or range from your AEG, the Prometheus HOP-up Tensioner for AEGs will help you achieve it! Supplied as a pack of two tensioners, you can choose between a "Bridge" style design with a central groove designed to reduce side-to-side deviation and thus, enhance accuracy, or a "Flat" style design intended to achieve maximum range. The contact surface provided by this HOP-up nub (another word for tensioner) is far larger than the standard, resulting in a stronger backspin effect and extended range with heavy-weight BBs.

The two tensioners included in the set are of different colours; one purple and one black. The purple tensioner is made from softer rubber, designed for sub-350 FPS builds and the black one is slightly harder, ideal for 350 FPS and above, making it the perfect tensioner for an AEG DMR. Compatibility-wise, these tensioners should fit almost any Airsoft AEG HOP-up unit but as always is the case with internal upgrades, we only recommend these for experienced techs and those who know their way around AEG internals. If accuracy and range is your objective, the Prometheus Bridge HOP-up Tensioner for AEGs belongs in your build!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy.

This is a replacement HOP-up rubber for the Novrtisch ''Full thrust'' SSG10 Sniper rifle and is only compatible with this platform due to the increased size of the HOP-up chamber and inner barrel. It is the perfect replacement piece to increase the lifespan of your Full Thrust SSG10 and have it shoot like a laser on the battlefield.

If you're noticing a dip in your SSG10 Full Thrust Sniper Rifle and you want a quick fix that is affordable, the Novritsch SSG10 Full Thrust Bucking is here for you!

Compared to the Autobot, this hop up rubber is far stronger and has a flatter shaped contact patch inside.

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

A high quality replacement Hop up rubber, made to 50 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

A high quality replacement Hop up rubber, made to 70 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy.

For the Airsofter who wants ultimate range and accuracy from their AEG. This high performance bucking by Prometheus is designed for Marui AEGs and is smooth inside, making it suitable for those with a Flat or R-Hop modification.

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!