Airsoft Magazine Accessories

If you've dropped your SigAir 100rnd Mid-Cap Magazine and now the baseplate is damaged, then you're in luck! The VFC SigAir Polymer MPX AEG Replacement Magazine Baseplate fits only these magazines and comes with a steel screw so you can instantly replace your broken or marked baseplates. It is only compatible with these magazines and will not fit on other magazines.

The baseplate features SigAir trademarks on the bottom, we imagine nobody is really going to notice these, but when you reload your MPX John Wick style, your teammates and foes alike may catch a glimpse of the trademarks when you get your own cinematic slow-motion shot.

Has your R29 magazine become damaged in some way, and a new base is exactly what you need? Well, lucky for you, this is exactly that! The Army Armament Replacement Baseplate for R29 GBB is a replacement part designed for R29 magazines but it should be compatible with other 1911 magazines that are Tokyo Marui clones. However, modification may be required and you should only undertake this modification if you are absolutely confident in your abilities.

It comes with the magazine base and gasket, it does not include a gas inlet valve. It is also recommended that you use silicone oil whilst installing to minimise the risk of damaging the seals.

If you struggle to get your SRS magazines out of your mag pouches quickly, this should help! The Hades Airsoft Magazine Base for SRS Sniper Rifles mounts to the bottom of your Silverback SRS Sniper Rifle magazine and provides extra purchase for easier handling. Faster reloads mean more chances to bag that kill! 

If you're seeking a way to style up your PTS EPM-AR9 magazines, these will do the trick! The PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack are constructed from the same rock-solid Dupont Zytel Polymer as the originals but finished in red, adding a touch of contrast to your setup to make it really pop.

Like the original black baseplates, the red versions have a dot matrix on each, ideally suited to marking your magazines, either numerically or to identify which mag is yours. The set also includes 3 mounting screws which is great news for those who've lost one. If you're an aggressive skirmisher who values style over concealment, the PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack in spicy red will suit your needs perfectly!

If you need more firepower for your tri-shot shotgun, this mag adapter is the key! The Battleaxe M4/AR-15 AEG Magazine Adapter for M870 Shotguns allows your tri-shot M870 shotgun to be fed from common M4/AR-15 AEG magazines, offering a significant capacity boost so you can stay in the fight for longer!

Like shotgun drum magazines, the installation of this adapter requires the removal of the shell port door of your shotgun. This can be a permanent mod on some M870 shotguns, so please bear this in mind before purchasing. With this adapter on board, you can feed your shotty with M4 AEG high-cap mags or mid-cap mags in a range of styles, giving you insane firepower on the field without the bulk of a drum mag!

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

Want to make your VMP-2 magazines look great and far easier to handle? The Magazine Sleeves for VMP-2 GBB Magazines; 2 Pack is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and are designed to slip over the lower section of the VMP GBB magazine and make them easier to handle in wet and cold weather and fit perfectly with the VMP-2. 

Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place. Please note, with these sleeves on your magazines you will no longer be able to insert them into a VMP-1. 

A BB holding bottle, designed to allow you to store up to 1200 BB's and then dispense them using a foldable nozzle. 

If you plan to run your Hi-Capa GBB pistol with high pressure air, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is essential. This magazine adapter allows your Hi-Capa GBB to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you want to eliminate cooldown, improve rapid-fire performance and increase your mag capacity, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is what you need!

Instantly fill your revolver with a new set of BB carry shells! Suitable for both 4" and 8" Dan Wesson revolvers. This method is much quicker than replacing each shell individually, and makes reloading your Airsoft revolver a dream.

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

A set of improved G-Series pistol magazine base plates designed to fit Tokyo Marui Magazines, made from TPU rubber to absorb impacts!

A magazine adaptor designed to make the ARES VZ.58 Carbine and Comapct compatible with STANAG / M4 AEG 6mm BB Airsoft Magazines. 

The Novritsch HPA Connector - EU Type is designed to screw into a compatible gas magazine, replacing the gas inlet valve. This then allows you to attach an EU spec HPA line to your magazine. HPA is popular due to its consistency and performance in cold weather games, however, it does require a lot of modification which is not covered by the Patrol Base or Novritsch warranty.

You must ensure that your HPA system is EU spec and not US spec as they are not cross-compatible and the Novritsch HPA Connector - EU Type will not work with a US spec HPA line. Make your compatible gas magazines HPA-ready so you don't notice a dip in performance during those cold winter skirmishes, or you desire an incredibly consistent performance all year round.

If you have dropped a GBB pistol magazine before, you will know the pain of a small but costly mistake ruining your magazine. The Enhanced Pistol Shockplate from PTS Syndicate is designed to prevent this; with a combination of high-density polymer and impact-resistant hard rubber in its construction your magazine has never stood a better chance of surviving a drop than it will with one of these installed!