Airsoft Pistol Magazines

If you plan on taking your WE Pistole 38 GBB Pistol out on the skirmish field but you feel like one 14rnd magazine is nowhere near enough ammo for you, then you need the WE 14rnd Gas Magazine for P38 Pistol! This magazine is the same as the one that comes with the pistol, so there will be no concerns with compatibility.

It holds 14 BBs and is filled using a speedloader on the feed lips at the top of the magazine. This is a low-capacity but is still 6 ammunition more than the real steel pistol. Its alloy shell protects the polymer internals and gas chamber, which can be filled at the bottom of the magazine in the gas valve.

Pick up some spare magazines for your P38 pistol and take it with you to your next skirmish, or pick up a couple of mags for some test firing in the garden!

Shooting 350 BBs at a target without the added effort of swapping magazines sounds nice right, but usually that comes with the pain and price tag of setting up HPA build, well not anymore! This WE 350rnd Green Gas Drum Magazine allows you to do just that, let off 350rnds without being interrupted by having to swap magazines. It is designed for WE B92 pistols but may work with others, though compatibility cannot be guaranteed.

The magazine is constructed with a hefty alloy gas reservoir with a high-density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you want to run a pistol only this will provide you with more than enough firepower!

This is a spare or replacement Gas Magazine for the Action Army AAP-01 Assassin Pistol, that holds a total of 23rnds and is based on the EU Series design. It is filled with BBs and Gas just like any other Pistol Magazine, using a Speedloader to feed BBs in through the feed lips, or holding down the follower to fill the BBs from the bottom of the Magazine. The Inlet Valve on the base of the Magazine is where you should insert your Green Gas bottle to fill it.

If you own an AAP-01 Assassin and want to spend more time dumping magazines on Full Auto, and less time fumbling around with a Speedloader, then you will need a backlog of Spare Magazines.

ASG MK23 Socom magazines are currently readily available at an affordable price. Delivering great gas efficiency too; on a good day expect up to three if not more full magazines worth of shots from one charge of gas.

A 25 Round Green Gas Powered Magazine designed for the Airsoft GLOCK 17 Gen4 by UMAREX. This magazine works with the Umarex/VFC Glock 17 GBB and is also compatible with the KRYTAC Maxim 9 GBB but is not compatible with 4.5mm Air pistols. 

A spare Gas magazine for the Army Armament R501 Gas Blowback Airsoft Pistol, which holds a total of 30 BBs and is the perfect way to spend more time in the field playing, and less time in the safe zone reloading. The magazine features a custom Polymer Baseplate which is easily slid to the side to access the inlet valve. 

A 25 Round Green Gas Powered Magazine designed for the GLOCK 17 Gen5 by UMAREX.

An Alloy constructed 23rnd magazine for the Vorsk series of Hi-Capa Gas Blowback Pistols.

A gas blowback Airsoft magazine developed by VORSK for their G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine holds up to 23 rounds and is a direct replacement for the magazine which comes with the pistol, and is filled with BBs from the top or front, and is filled with gas from the bottom once the base plate has been slid to the front. 

If you're looking to bolster your VORSK G-Series pistol magazine with 100% compatible magazines then this is the way to go. 

A spare or replacement Gas Magazine for the WE branded EU17 series Pistols. It is designed for the GEN 5 iteration of the EU17 but will function with GEN 3 and GEN 4 Pistols as well. It holds a total of 25rnds and can be filled with a Speedloader from the top or bottom.

A green gas pistol magazine designed for use with the NUPROL RAVEN Range of MEU and 1911 GBB Pistols. This magazine is constructed from alloy with polymer feed lips, and has a 22 round capacity. 

A spare Magazine for the Tokyo Marui Airsoft Hi-Capa 5.1 6mm BB Pistol Range. The Magazine is constructed with an Alloy Body, and a Polymer Feed Lip, Magazine Follower and Base and features a Chrome Finishing. 

If you are a rootin' tootin' gun slinger who skirmishes with an HFC gas revolver a pocket full of these will cure what ails ya! These revolver shells hold one 6mm BB in each shell, and come packaged as a set of 6 so you can feel lucky all day. The BB is loaded into the front of each shell and is retained using an O-ring, preventing the BB from rolling out. The shells are constructed from alloy with a brass finish, with the "projectile" section of the cartridge being a slightly lighter shade for added realism. These shells are the perfect choice to fill your pouches if you run an HFC revolver in-game, but they would also be useful for photoshoots where realistic cartridges in the background will only enhance the scene!

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

An Alloy constructed 23rnd magazine for the RAVEN series of Hi-Capa Gas Blowback Pistols.

If you're lucky enough to own a Novritsch SSP1 or SSP5 GBB pistol, load up on these! The Novritsch 29rnd Green Gas Magazine for SSP1/SSP5 GBB is constructed from alloy with a polymer baseplate, brass valves and rubber O-rings. Compatible with most Hi-capa 5.1 GBB pistols but made especially for the SSP1 and SSP5 pistols from Novritsch. 

Filling the mag with gas is as simple as sliding the baseplate off and inverting the mag to fill, as you would with other green gas magazines. Loading the BBs can be done through the feed lips with a speed loader equipped with a GBB adapter but you can also pull the follower down and load through the widened section at the bottom. If you want to maximise your kill potential, load up on mags!

If you're looking for an easy way to carry a lot more ammo, the Delta Armory 50rnd Extended Magazine for P-Series GBB Pistols has you covered! This magazine is constructed from a heavyweight alloy with a steel feed spring and polymer feed lips. The base plate can easily be removed, making maintenance and repairs a breeze. On the rear of the magazine, we can find some markings that count up to 31, presumably a nod to real steel extended pistol magazines.

This double-stacked magazine holds a whopping 50 BBs, which can be loaded either at the top or front, using a speedloader. To fill the gas, there is a fill valve located on the bottom, recessed into the magazine. Due to the magazine being larger than a regular pistol mag, it takes longer to cool down when shooting so you'll get more shots at full power before noticing a dip.

Compatibility-wise, this magazine is designed for the Delta Armory P-series pistols but should fit most EU-style pistols, including the Tokyo Marui EU pistol, the Action Army AAP-01 and the Umarex Glock. If you're looking for extra BBs to dominate with your sidearm, the Delta Armory 50rnd Extended Green Gas Magazine for P-Series GBB Pistol is for you!

A spare or replacement magazine for Raven's R9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.

A gas blowback Airsoft magazine developed by VORSK for their G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and  holds an impressive 48 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and is filled with gas from the bottom once the base plate has been slid to the front. 

If you're looking to bolster your VORSK G-Series pistol magazine with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. 

If you want to keep your Desert Eagle running when the cold sets in a CO2 mag is the only way to do it. The 27rnd CO2 Magazine for WE/Armourer Works Desert Eagle GBB Pistol is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE/Armourer Works Desert Eagle GBB pistol and will not work in the KWC full auto version.

The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. The mag takes 12g unthreaded CO2 capsules and a single capsule can be inserted from the left side of the magazine and tightened via the Allen screw on the baseplate. As always, this magazine will require lubrication to maintain its health in the long term, and we recommend applying some Silicone Dropper Oil to the top of each CO2 bulb before inserting it. Keep your mighty Desert Eagle in the fight all winter with this CO2 magazine!

A CO2 powered 21rnd magazine for the KWC/Cyber Gun CO2 powered Desert Eagle.

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

Looking for spare mags for your Spicy Vorsk VX26 GBB? Here they are, with a whopping 30 round capacity and a nice polymer baseplate to protect the magazine from accidental drops. This magazine is for use with green gas and is loaded through the feed lips at the top or by pulling the follower down and loading though the widened section of the follower channel. You can use either a speed loader or do it by hand, though we advise the former if you're in a hurry!

If you plan to run your Hi-Capa GBB pistol with high pressure air, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is essential. This magazine adapter allows your Hi-Capa GBB to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you want to eliminate cooldown, improve rapid-fire performance and increase your mag capacity, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is what you need!

The Cybergun 35rnd Magazine For Desert Eagle .50AE AEP is exactly what you need to keep your CM.121 or CM.121S in the fight for longer. This unique magazine is designed exclusively for Desert Eagle AEPs and is not compatible with other pistols. It has a capacity of 35 BBs which is useful considering the full auto capabilities of the Cyma Desert Eagles. To load the BBs you can pull the spring downwards and insert BBs directly into the feed lips using a speedloader.

An Airsoft 6mm BB gas blowback magazine for the 5.1 Hi-Capa pistol series, with a double stacked design it has a capacity of up to 25 bb rounds. 

A replacement magazine for the CM.125 AEP Electric Pistol which is designed to fit into the pistol and be used to carry extra rounds into the game meaning you don't have to stop mid game to use a fiddly speed loader.

The Novritsch 32rnd Gen.3 Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gen.3 Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

A 22 round Green Gas / Inlet Valve Magazine for the UMAREX Glock 45 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades. 

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 49rnd Extended Gas Magazine for SSP18 GBB is constructed from alloy and an extended design with a 49rnd capacity. This green gas magazine can be filled through the fill valve on the baseplate by inverting it, as you would with any other GBB mag. 

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. While it may be heavier and bigger than a standard mag, this is really the only way to do that rapid full auto mode justice!