Airsoft Receivers & Receiver Parts

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

A Steel manufactured Fire Selector for LCT branded AKM models; ideal as a spare part or replacement.

A replacement for lost or damaged ICS CES SMG-5 SD Series sling loops these parts are direct from the manufacturer replacements, which are exactly the same as the ones supplied with the weapon. Can be used to replace lost or damaged sling loops which may have been lost if too much force was applied to the sling.

Had a little mishap when taking your B9 GBB apart? KJW have just the thing. The B9 series GBB magazine catch is an original replacement part, and fits both the KJ Works B9 GBB series and the LS B9 GBB series. The set includes the magazine release and its spring.

Though it is designed by KJW for their B9 GBB series this mag catch may be compatible with other B9 GBBs but we aren't able to test this so please consider carefully before buying.

A precisely engineered and uprated loading handle for the terrifying ASW338LM Airsoft sniper rifle from Ashbury Precision Ordnance.

Looking for fast access to the selector switch on your AAP-01? So are we! Thankfully, TTi, being the innovators they are have invented the perfect solution! The Competition Charging Handle with selector switch combines an extended charging handle with an extended rotary selector switch which allows you to change fire modes in a flash without needing to lock the bolt open and break fingernails. This is the aftermarket part the AAP always needed!

A Steel constructed replacement Receiver & Folding Stock for the LCT M70AB2 Airsoft Electric Gun, which features a Stamped Steel receiver and Steel Underfolder Stock, complete with Sling Loop.

Introducing Neo.2, the ultimate base set for building your very own M4 airsoft replica. This custom-designed receiver and matching handguard set are CNC-cut to perfection and coated with a durable Cerakote finish that comes in a base colour with a contrasting splatter design, making it a true standout on the field.

Crafted with precision and the highest quality materials, Neo.2 is designed to provide an extra level of grip and protection to your airsoft gun. Its unique and eye-catching design is sure to impress even the most seasoned players.

The Neo.2 receiver and handguard set is put together quickly and is of course compatible with most M4 parts, providing maximum versatility and adaptability. This product is perfect for both beginners and advanced airsoft enthusiasts who want to elevate their gameplay to the next level.

Neo.2 is not just an upgrade in aesthetics, but in functionality as well. The Cerakote finish provides an extra layer of protection against wear and tear, while the CNC-milled cuts ensure maximum precision and stability during gameplay.

Don't settle for an ordinary airsoft build when you can have a standout one with Neo.2. Get yours today and dominate the field like never before.

Introducing OMG, the ultimate base set for building your very own Speedsoft M4 airsoft replica. This custom-designed receiver and matching handguard set are CNC-cut to perfection and coated with a durable Cerakote finish that comes in a base colour with a contrasting splatter design, making it a true standout on the field.

Crafted with precision and the highest quality materials, OMG is designed to provide an extra level of grip and protection to your airsoft gun. Its unique and eye-catching design is sure to impress even the most seasoned players.

The OMG receiver and handguard set are put together quickly and are of course compatible with most M4 parts, providing maximum versatility and adaptability. This product is perfect for both beginners and advanced airsoft enthusiasts who want to elevate their gameplay to the next level.

OMG is not just an upgrade in aesthetics, but in functionality as well. The Cerakote finish provides an extra layer of protection against wear and tear, while the CNC-milled cuts ensure maximum precision and stability during gameplay.

Don't settle for an ordinary airsoft build when you can have a standout one with the OMG body and handguard kit. Get yours today and dominate the field like never before.

An alloy, ambidextrous replacement mag release for M4/15/16 variant rifles that is ready to install right out of the packet.

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

If you run a GBBR M4/AR-15 and you want an easy way to improve your weapons handling, the Aluminium BAD lever for M4/AR-15 from Big Dragon is what you need! This device attaches to the bolt release catch on the left side of the receiver and allows you to drop the bolt after a reload without having to hit the ping pong paddle, instead you press this lever with your trigger finger. The BAD (Battery Assist Device) also allows you to lock the bolt to the rear without taking your hand off the pistol grip with a push upwards on the lever when the charging handle is pulled back.

AEG users need not feel left out; the BAD can still be mounted to your AEG, but more as an aesthetic touch to mimic real world customised ARs. Compatibility wise, this device may need modification or shimming for a tight fit on any specific platform, so we only recommend this part for experienced users.

If you want to style up your M4/AR15 with some interesting small parts, starting with the fire selector isn't a bad shout! Introducing the Custom Safety Selector from Big Dragon, a stylish modern selector moulded from polymer, with an enlarged design and grooves for additional grip which guarantees you won't slip off the selector at a critical moment! This selector could be the icing on the cake that is your latest high-speed M4 build, and provides a vast improvement over standard M4/AR15 selector levers. 

If you're putting together an M4/AR-15 AEG from scratch or you want to add a sliding stock to your fixed stock rifle, this buffer tube should help! The Buffer Tube for M4/AR-15 AEG from Delta Armory is constructed from alloy and compatible with most M4/AR-15 AEGs on the market. The tube provides 6 positions of adjustment for whichever M4/AR-15 AEG sliding stock you choose to mount, allowing you to collapse the stock for storage or close-range engagements. 

The set includes the buffer tube itself, the castle nut (non-functional) and the bolt required to mount the buffer tube. This is a standard TM clone buffer tube design and should fit most M4/AR-15 AEGs without issue, though as with any external mod, there may be slight fitting which needs to be carried out. 

Constructed from lightweight alloy, the cover is easily fit by swapping it out with the original folding dust cover. With a rail measuring over 7 inches, this cover gives your AK some much-needed customisation options to which you can attach the sight or scope of your choosing. A scope can now be mounted to the very rear of your dust cover, which gives you a long sight radius.

The cover is installed in place of your rear sight by removing the rear sights' pin. Give your AK some love!

An Aluminium constructed charging handle extension for AK style replicas.

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The CYMA Tactical Extended Fire Selector Lever for AK47/74 AEG is constructed from stamped steel and is a modernised design with a cutout for the AK bolt handle and a ledge that can be used to select fire modes from a firing grip.

With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger. This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. A perfect item for any Tactical AK or PMC style custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use!

If your AK47 selector lever is looking a bit battered or you've lost some bits, CYMA has your back! The Fire Selector Lever for CM.028 AK47 AEG is a replacement original part for the CM.028 series but should also fit other Tokyo Marui compatible AK AEGs. The lever itself is constructed from stamped steel and comes with the parts required to attach it, including the cap which is one of those bits which likes to go missing.

If you want to speed up your Vector manipulation Laylax has what you need in the form of the Custom Extended Magazine catch! This mag catch replaces the original and relocates the release button to the left side, just ahead of the trigger. This allows you to release the magazine with your trigger finger like with an M4/AR15 platform so you can use your support hand to reach for a new magazine, speeding up the reload process and getting you back online frighteningly fast with some practice.

This magazine release is constructed from aluminium and is styled to match the ultra-slick modern looks of the Vector platform, meaning your Vector won't lose its good looks when you upgrade the mag release. The release button itself is textured to allow it to be used in all weather conditions and can be extended or retracted to fit any hand size, allowing an easy, comfortable and fast reload process for all Vector users. Now KRISS Vector users can drop it like it's hot just like the M4/AR15 guys!

If you have lost a selector switch from your ARCTURUS GR16 AT-HT01 AEG, either to the woods or the carpet, you are in luck! The ARCTURUS Ambidextrous Selector Switch Set for GR16 AT-HT01 AEG is a set of original replacement parts including both selector switches, 2 screws to mount them and the detent spring and detent itself.

We all know how easy it is to lose these tiny bits if something goes wrong, whether at the workbench or at a skirmish site. If you own an ARCTURUS GR16 AT-HT01 AEG, even if it is fully intact, having spares on hand can be an absolute life saver!

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

This one's for all you AK lovers looking to treat your rifle to a new receiver and stock. Constructed entirely from durable steel, this will undoubtedly give you AK a nice sturdy feel with a good weight balance. The stock itself is skeletonised to keep the weight balance and to allow it to fold into the receiver and lock in place with a latch.

The receiver has all the hallmarks of a classic AK body, with its signature level style mag release and angular trigger guard and is even complete with the iconic AK dovetail side mount, to which you can attach the tactical accessories of your choice.

Whether your looking to spruce up your AK47 with a new receiver and folding stock, or fancy creating some Frankenstein's monster of a rifle by attaching this to a non Russian rifle (we won't judge), this solid piece of gear is a great buy at the price.