Airsoft Silencers, Suppressors & Tracer Units

Used by the UKSF, this replica suppressor doubles as a tracer unit and attached to your 14mm CCW outer barrel and provides an ultra-realistic muzzle device experience. Featuring a clean, well-weighted alloy design with an aggressive low profile front muzzle.

If you're looking for a way to transform your pistol and up its FPS in a stealthy fashion look no further than the WE Silencer Extended Barrel Kit. The inner barrel extension is a replacement for your current inner barrel and will need some technical disassembly, or alternatively, if you don't need any more FPS you can always just use the alloy suppressor itself.

The suppressor is attached via the 11mm CCW thread and fits over the inner barrel for a seamless upgrade.

Features

• 180mm Inner barrel extension
• 110mm suppressor
• 11mm CCW thread
• Alloy construction
• Increases FPS
• Increases accuracy

Package Includes

• Silencer Extended Barrel Kit
• Spring

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

For all you serious SMG5 lovers out there in need of a tracer, this is the one for you! Featuring robust full alloy construction with a smooth, brushed finish for a lightweight build and sleek design.

The tracer unit sports a fluted design, which in the real world equivalent would help displace heat, however even though this is an Airsoft replica the fluted design does have other practical benefits such as reducing weight to prevent your weapon from becoming too forward heavy.

Featuring a tri-lug muzzle attachment method, the tracer can be quickly attached and detached on the fly if you need to switch up your shooting style during gameplay and it can be used on other replicas with a tri-lug device (see special instructions).

If you have dreams of running your Maxim 9 GBB pistol with an integral tracer unit, your dreams can now become reality! The KRYTAC SilencerCo Maxim 9 GBB Tracer Unit/Extension Kit is designed to fit the KRYTAC Maxim 9 GBB pistol and extends the front end by approximately 3.1cm (not including the front piece) to accommodate the included Acetech muzzle flash tracer unit, though you can still mount the tracer without the extension kit.

The set includes an extension piece and wide front aperture constructed from aluminium, a pair of extended steel guide rods and the tracer unit itself. This is the perfect accessory to take full advantage of the KRYTAC Maxim 9's fantastic performance in a CQB environment!

A replica of the legendary PBS-4 Suppressor, lovingly recreated using Aluminium and with a 14mm CCW Thread, so that it can attach to more than just an AK! This Suppressor is designed for 5.45x39mm AKs (in the real world), but is an unusual design that can add a cool touch to any replica. If your Airsoft Gun has a 14mm CCW Thread, this Suppressor will fit and work, and is the ideal way to make your Gun stand out from the crowd.

If you have had your eye on one of the super cool new spitfire tracers on the market but would prefer it in a more AK-friendly design, we have just what you need! The Vityaz Spitfire Tracer unit from 5KU combines the awesome functionality of a spitfire tracer unit, with its realistic muzzle flash effect and tracing function when used with tracer BBs with the unique looks of a Russian designed suppressor. 

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

A highly realistic 24mm CW Suppressor/Tracer Unit made from Steel, with an internal rechargeable battery that lasts for thousands of shots. This Tracer Unit is made specifically for AKs that feature a 24mm CW Thread (please check before purchase), and can be charged using the Micro USB Cable just like your Mobile Phone.

If you want the stealthy aesthetic for your VMP-1, this is how you do it! The VORSK QD Suppressor V1 for VMP-1 GBB is compatible with the VORSK VMP-1, VMP-1X and the VMP-2 but will not fit the VMP-1C without a VORSK VMP multi-lug muzzle device. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed. 

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your VMP-1 slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

Made to be the most effective, well constructed and good looking suppressors for Airsoft or training.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

An Alloy constructed Suppressor for Airsoft replicas, featuring a 14mm CCW Thread at one end, and 14mm CW Thread at the other to make it compatible with any Airsoft Gun that has a 14mm Male Thread. 

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

A lightweight and slim profile suppressor which is made from Alloy, and has external grooves and texturing for improved grip and aesthetics.

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

This Airsoft Suppressor is a replica of the PBS-1 which is designed for AK Platform rifles in the real world, but will work with anything that has either a 14mm CCW or 24mm CW Thread. This means it will fit to any replica with a standard thread, but can also directly thread to the Outer Barrel of AK models that have the appropriate thread (such as LCT branded AKs).

This Muzzle Device is designed for Airsoft Guns with a 14mm CCW Male Thread (which is 95% of Airsoft Replicas), and is the perfect finishing touch to any custom build, and is especially useful for hiding an Inner Barrel Extension. If you have a Airsoft Gun with a 14mm CCW Thread, custom or not, then the CYMA Dummy Sound Suppressor will look great sat on the end.

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

An Airsoft suppressor designed to be fit onto Airsoft guns which have a 14mm Counter Clockwise, CCW, threaded outer barrel, and has a textured body for easy attachment and removal. The suppressor is filled with foam designed to reduce the amount of noise your gun makes by absorbing a small amount of the sound when your Airsoft Gun is fired.

This suppressor is perfect for any Airsoft Skirmisher who is looking to give their Airsoft rifle a new look, or for those who want to modify the sound of their Airsoft replica.

A Suppressor for Airsoft Guns with a 14mm Clockwise or Counter Clockwise Thread, which is made from Aluminium to be both tough and lightweight. 

The Suppressor is foam filled, which will slightly dampen your Muzzle Report, and it also has a Spring Core which keeps the foam in position and stops your BBs fouling on the foam as they try to leave the barrel. 

If you have a custom Airsoft Gun or want to hide an Inner Barrel Extension, then this Dummy Sound Suppressor is the perfect finishing touch.

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

If you are after a lightweight, simple suppressor to add to the look of your AEG, rather than dominating it, the Dummy sound suppressor from CYMA may be just what you need!

A 14mm counter clockwise threaded Airsoft suppressor, featuring US Government military markings, designed to mount onto your Airsoft gun's outer barrel and replace the original flash hider. 

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.