Airsoft Silencers, Suppressors & Tracer Units

If you're looking for a sneaky suppressor with a quick detach design, the Novritsch Fast Attach Suppressor System is for you! This package consists of a steel flash hider and an aluminium suppressor. They are designed to work with one another to create a fast attach system so you can quickly equip or unequip your suppressor depending on the situation you find yourself in whilst out on the battlefield.

The suppressor features internal foam and cavities designed to baffle and reduce the noise of excess air or gas from your Airsoft replica. Both products are constructed from durable materials, designed to survive the rigors of a tough skirmish. As well as being hard-wearing, they have also been crafted with exceptional aesthetics, the flash hider silhouettes real steel variants and the suppressor boasts a sporty fluted design that is sure to catch the eyes of your fellow skirmishers.

If you're ready to take your operations clandestine, there is no better way than with the Novritsch Fast Attach Suppressor System. Stealth and style are both important for the battlefield, and with this suppressor system, you get both in one!

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!

If you want a more aggressive look for your PTS Sandman suppressor, the PTS Syndicate Dead Air R-Series Flash Hider Front Cap for Sandman Suppressors will give you what you need. This front cap replaces the original cap on any of PTS's Dead Air Sandman suppressors with a fantastic replica of the real steel Dead Air Flash Hider Front Cap. In real steel terms, this reduces muzzle flash signature but in Airsoft terms, it's only for the look!

If you're going for the sneaky look on a tight budget, the FMA Navy Silencer belongs on your build! An aluminium mock suppressor designed to mount to common 14mm CCW male barrel threading found on most AEGs and GBBRs, the Navy Silencer sports white laser-engraved Navy SEAL markings on the outside and a convenient knurled section which makes the suppressor easy to mount and remove.

Measuring 19.7 x 3.2 cm approximately, the Navy Silencer looks nice and proportional on M4 CQBR builds, with the appropriate thickness to simulate a rifle-calibre suppressor. If a stealthy loadout is your next project, the FMA Navy Silencer will give you what you need!

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!

If you're looking for a uniquely menacing suppressor with an ultra-modern real steel lineage, the Airsoft Artisan SRD762 Dummy Suppressor belongs on your gat! Well suited to Sig MCX and Rattler builds but compatible with any Airsoft platform with a 14mm CCW male threaded barrel, the SRD762 makes a fantastic finishing touch to any modern build, particularly a .300 Blackout!

Externally, the SRD762 takes a walk on the wild side, equipped with a menacing spiked front end designed for breaching doors in real steel form. The exterior profile is ribbed to match the real thing, intended to help dissipate built-up heat but serving in Airsoft terms to keep the SRD762 looking faithful to its real steel counterpart. 

Inside the SRD762 you'll find a spacer designed to accommodate a 34mm diameter tracer module and in the box, you'll get an aluminium tube in case you want to run an extended inner barrel through it or prevent your BBs from hitting the inside. If a modern suppressor is on your shopping list, the Airsoft Artisan SRD762 Dummy Suppressor is as well-made and good-looking as they come! 

Looking for a tiny suppressor that will fit inside your rail system (if the inner diameter is over 32mm)? The FMA NAVY SEALs Dummy Silencer provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other, perfect for those who are unsure of their rifle's threading!

This suppressor is constructed from lightweight aluminium and has US NAVY SEALs markings on it, making it the perfect attachment for those who want a military finish for their Airsoft platform. Get the FMA NAVY SEALs Dummy Silencer, an affordable, stylish rifle attachment!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

This stupendously massive and imposing Suppressor is designed for AK replicas with a 24mm CW Thread, and is crafted from Aluminium 6061 and Steel to the usual high standard that LCT pride themselves on. Also featuring a spring-loaded Inner Barrel Extension, this is the Suppressor for you if you want to stand out anywhere.

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

If you want that "I just triple tapped Bin Laden in the face" look, you probably already have an MP7, but you will be needing the suppressor to match. Introducing the H&K licensed suppressor for the MP7 by Umarex, a Quick detach suppressor with a foam filling for added suppression effect.

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Bacon" version, marked with "Put Bacon Here" on the outside. Naturally, we don't recommend doing this for food hygiene reasons but Americans have been known to cook bacon using real steel suppressors, taking advantage of the heat build-up to kill two birds with one stone. How very American!

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Bacon" version, marked with "Put Bacon Here" on the outside. Naturally, we don't recommend doing this for food hygiene reasons but Americans have been known to cook bacon using real steel suppressors, taking advantage of the heat build-up to kill two birds with one stone. How very American!

If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.

The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.

On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

If you're looking for a suppressor which departs from the norm with a futuristic profile, the Novritsch Rectangular Modular Suppressor V2 is the one. This CNC aluminium suppressor boasts an acoustic foam filling for effective sound dampening and can be reconfigured into 3 different lengths to suit any build objective. 

This version of the Modular Suppressor V2 mounts to either 14mm CCW male threaded outer barrels or 16mm CW threaded outer barrels depending on the variant you choose, meaning an easy fit on most AEG assault rifles and SMGs and a specific variant for MK23 and SSX23 NBBs. Its lightweight nature makes it ideal for GBB pistols with tilting barrels, and we recommend using the shortest configuration for the best possible gas efficiency. Included in the set are a pair of additional bolts, allowing you to use the suppressor at full-length (170mm), mid-length (110mm) and ultra-short (80mm) configurations. If you need a suppressor with a modern look to suit your cutting-edge build, the Novritsch Modular Suppressor V2 is ideal!

The Swiss Arms QD Suppressor will comfortably sit on any M4 Type Bird Cage Flash Hider. It features 4 steel ball bearings which friction lock onto your flash hider to keep the suppressor securely fastened. If you're looking for that sneaky aesthetic, with the option to quickly detach it if you need to, then this is the suppressor for you.

To attach the suppressor to your flash hider loosen the threads and sit it over your flash hider. Then tighten the suppressor until it is firmly attached to your flash hider. To quickly detach the suppressor, simply loosen the threading and it can be pulled off with ease.

The suppressor is constructed from alloy and is compatible with the M4 Type Bird Cage Flash Hider, which can be mounted on any Airsoft platform. Whether you are taking your DMR build in a sneaky direction or creating an assault rifle for stealthy style, the Swiss Arms QD Suppressor is the perfect finishing touch!

Whether you're looking for a suppressor which can change its length to suit your mood or your MK23 needs a new can, the Novritsch Modular Suppressor V1; Standard is a fine choice! This aluminium suppressor unscrews at different lengths, allowing you to set it up as a lengthy 22.5cm or stumpy 10.5cm length, with a 14.5cm option for those in between! 

By default, the Modular Suppressor V1 mounts to 16mm CW male threads, making it perfect for MK23s, but also includes a 14mm CCW adapter which allows it to mount to most Airsoft AEGs, including the SSR9 DSG, SSR4 and other Novritsch AEGs. Inside, you'll find acoustic foam "baffles", intended to absorb the sound emitted from the muzzle and make your firing position harder to locate. 

On an AEG, this does make a slight difference, but on a MK23 the difference is staggering, turning the "crack" from the muzzle into a barely discernable dull "thud", ideal for sneaky snipers and others who appreciate the in-built discretion of the MK23/SSX23 platform. If you need a suppressor as sneaky as you are with plenty of options mounting options and a customisable, modular design, the Novritsch Modular Suppressor V1; Standard is the one to go for!

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.