Airsoft M4/AR-15 Magazines

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.

Either side of the magazine has ridged extrusions  to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

Looking for a real cap magazine for Milsim that can double as a mid-cap for regular Airsoft skirmishes? The DMAG from D-Day is a high-density polymer magazine, styled after the latest "416" style magazine, complete with reinforcement ribs on either side and a redesigned shell shape to prevent the magazine from being over-inserted during a fast reload and damaging your HOP-up unit. This magazine is constructed with a high-density polymer shell and polymer internals with a steel feed spring and can be loaded through the fill/feed port at the top of the magazine.

A Polymer constructed Mid-Cap Magazine for AR/M4/M16 platform Airsoft Electric Guns, which holds a total of 130rnds and is a semi-transparent design with dummy rounds inside.

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

Introducing a unique and efficient interlocking magazine system. Simply place the mags together at the small circular extrusions at 90 degree angles, twist and boom! Locked in place.

This means you can have multiple mags locked and ready to reload without the need of mag pouches, plus it doesn't have to be just two interlocking mags, it could be more depending on how adventurous you're feeling!

Constructed from high density polymer with a translucent design, this magazine holds 150 BB's and is a mid-cap magazine, meaning no battle rattle! The magazine can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

Looking to feed your AR-15/M4? Here is what you need. An essential for any modern styled AR-15. Made from strong high density polymer this mag should survive a drop or two, though we don't recommend it! This even includes a clip on dust cover, similar to the real world Plastic-mag, helping keep your magazine dust free and in good working order even when stored for some time!

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

This is the G&G metal Airsoft medium capacity magazine that is ideal for the Airsofter wanting to experience a little more realism into their Skirmishing style. The mag features full metal construction with a medium 125rnd capacity for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

They might look like a standard Airsoft M4 AEG magazine, but they've got a little secret, they launch themselves out of your gun when empty!  A spring powered latch projects the magazine out of your gun when the mag is empty to allow you to reload faster when the seconds really count.

Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

A 300rnd High Capacity Magazine from ICS, which is filled from the top via a Fill Window, and wound from the bottom clockwork wheel to feed BBs into your Airsoft gun.

A spare magazine designed specifically for the Tokyo Marui 5.56 platform recoil series.