All Airsoft Submachine Guns

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

The CYMA CM.041G is a new model in the Platinum Series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC Steel Gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

Whether you are a sniper looking for a compact AEG backup or want something short and light to take advantage of your agility, the Cybergun P90 is perfect for the job. This AEG boasts full metal construction, realistic trademarks licenced by FN Herstal itself and ambidextrous controls, perfect for left-handed shooters or those who like to shoot from both shoulders to make the best use of cover.

The internals are based around the TM P90 design, meaning a version 6 gearbox, rotary HOP-up unit and full compatibility with aftermarket upgrades for the TM P90. Also fitted are a 6.03mm tightbore inner barrel for an improvement in accuracy potential and 8mm bushings for a smoother gearbox report and a slight increase in rate of fire. If you like to move fast and crawl in the woods, the P90 is your best friend!

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

If you're into historical platforms and seek the most realistic experience, check out the S&T PPSh-41 EBB Submachine AEG; Real Wood! This beast boasts full metal construction and a gorgeous real wood stock, making use of a high proportion of steel in the build for an authentically hefty feel in the hands and a truly realistic experience. The iconic PPSh-41 silhouette is completed with the included drum magazine which is constructed from steel and holds an incredible 2000 BBs. While this PPSh-41 is compatible with both stick and drum magazines from S&T, the included drum is probably enough!

To make matters all the sweeter, the S&T PPSh-41 has an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG. 

Inside the unique gearbox shell we have 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you're in search of a WW2-era Ruskie replica well suited to a highly mobile playstyle, the S&T PPSh-41 EBB Submachine AEG; Real Wood is a fine choice!

Amidst the endless droves of pistol calibre carbines and SMGs currently being released, G&G present the MXC-9 to reassert its dominance in the field of CQB Airsoft platforms. The MXC-9 is constructed from high density polymer with a CNC machined aluminium handguard, and makes use of G&G’s superb G2 gearbox, complete with programmable fire controls allowing for 3 round burst.

In the looks department, the MXC-9  is largely based on G&G’s PCC45, and is even compatible with PCC45 magazines, but blends the receiver style of the PCC45 with a shorter handguard, sound amplifying muzzle device and a newly designed multi-position folding stock. Consider this the lovechild of the MCX and PCC45, with the frightening performance of the ARP-9 and SSG-1’s G2 gearbox!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

The CYMA CM.051 is a replica of the classic 'Chicago Typewriter' Thompson Submachine Gun, AKA the "Tommy Gun". The CM.051 comes complete with all the correct furniture, in a beautiful and well-toned Faux Wood finish. 

This version of the Thompson has a few key differences from the M1A1 Military variant, mainly cooling fins on the barrel and the integrated Foregrip with/ finger grooves. Complete with a 550rnd Drum Magazine, this is the perfect Airsoft Electric Gun for someone who wants to stand out from the crowd, is interested in a historical or roleplay loadout, or just wants to suppress the enemy to bits using something that isn't an M4, the CYMA CM.051 is perfect for you.

An Electric Powered SMG-5 replica with a High Cycle Gearbox, which can output 6mm BBs at a muzzle velocity of 325FPS, at a Rate of Fire of over 1000RPM. Built to a very solid standard, this Full Metal replica weighs a surprising amount which makes it feel very realistic in the hands. If you love the SMG-5 shape, but have been put off by the poor performance of previous models, then the CYMA CM.041J High Speed will definitely appeal to you.

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. 

On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

The CYMA CM.041H is a new model in the Platinum series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC steel gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

A brilliant and affordable alloy construction 6mm BB Airsoft replica suppressed SMG-5, with solid polymer stock. The suppressor actually reduces the noise of the AEG when it fires!

This isn't just any P90, this is the Cyber Gun Licensed FN HERSTAL P90. Constructed from a mix of metal and polymer just like the real thing, stamped with official FN Herstal trades and fitted with the traditional red dot sight; this is a no-brainer for the P90 fanatic!

Issued to the US Secret Service, Belgian paratroopers, and special forces units from all around the world, you have to have been living under a rock to not notice this iconic PDW/submachine gun, especially for its role in Goldeneye 007 for the N64, The World is Not Enough and Stargate SG1. The Cyber Gun P90 is rocking the version 6 gearbox with a rotary adjustable HOP-up unit, and it may look funky but it has all it needs to keep the M4 and AK users on their toes! 

The CYMA CM.041SD6 High-Speed is an SMG-5 Platform Airsoft Electric Gun, which has been upgraded internally to provide an awesome Rate of Fire. A reinforced Version 2 Gearbox awaits inside, with goodies such as Steel Gears, Steel Rack Piston and other anodised CNC internals, to create an SMG-5 that performs like no other.

If you are looking for an SMG but you have experience with the M4/AR-15, an AR-9 platform would suit you perfectly. The Zion Arms PW9 MOD.1 follows the AR-9 design format but is constructed with a CNC 7075 T6 aluminium receiver and handguard making it lighter than a beachball while maintaining superb strength. Unlike many other Airsoft AR-9 SMGs, the PW9 is based on a real steel design, the R&D Precision PW9, and boasts licenced trademarks on its handguard as a homage to the real thing.

The story only gets sweeter when it comes to internals! Inside the PW9 we are treated to a polished 6.03mm tightbore inner barrel, rotary HOP-up unit, a quick change ball bearing spring guide, 19K RPM high-speed motor and the Zion Arms Nebula ETU to top it all off. The Nebula allows you to program the trigger for burst modes of different durations and also improves trigger response and rate of fire by reducing electrical resistance. If you have a mobile playstyle and appreciate a high speed SMG with phenomenal build quality you will definitely appreciate the Zion Arms PW9!

If you're looking for a cheap and easy way to start close-range skirmishing, this is it! The Evolution Reaper S EMR S Carbontech AR-9 SMG AEG; Starter Set includes an AEG, a magazine, a foregrip, 2000 BBs, a speedloader, a 7.4V Li-ion stick battery and a balance charger. Everything you need to start skirmishing right away!

This Evolution SMG is surprisingly advanced, given its price. It features an alloy handguard, a 6.01mm tightbore inner barrel, plenty of reinforced internals for durability and a quick-change spring for easy power tuning. If you're looking for a cheap Airsoft gun which comes skirmish-ready, the Evolution Reaper S EMR S Carbontech AR-9 SMG AEG; Starter Set is definitely for you!

If you're looking for a cheap and easy way to start close-range skirmishing, this is it! The Evolution Reaper XS EMR Carbontech AR-9 SMG AEG; Starter Set includes an AEG, a magazine, a foregrip, 2000 BBs, a speedloader, a 7.4V Li-ion stick battery and a balance charger. Everything you need to start skirmishing right away!

This Evolution SMG is surprisingly advanced, given its price. It features an alloy handguard, a 6.01mm tightbore inner barrel, plenty of reinforced internals for durability and a quick-change spring for easy power tuning. If you're looking for a cheap Airsoft gun which comes skirmish-ready, the Evolution Reaper XS EMR Carbontech AR-9 SMG AEG; Starter Set is definitely for you!

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

If you're in the mood for some spicy gas blowback action, but still enjoy a stealthy feel; this bundle is perfect for you! We've put the fantastic Umarex H&K MP7 A1 GBB SMG together with its own QD Suppressor two spare 40rnd Magazines, and a can of VORSK V6 Performance GBB Fuel

The CYMA Blue Limited Edition series are a premium line of Airsoft Electric Guns which featured upgraded internals over what you would normally expect from a tactical Airsoft SMG-5 replica.

If you have plans to build a slick P90 decked to the nines with cool mission essential kit, no need to, we have done it for you! The P90 Fully Decked Out Bundle includes the Cybergun FN P90 AEG, a red dot sight, suppressor, V300 flashlight, a 9.6V NiMH battery and charger, and a bottle of 0.25g BBs. Just remember when installing the suppressor, the P90's flash hider is held on by a grub screw, this must be removed before you attempt to unscrew the flash hider.

If you're ready to get busy with a super cool subgun, decked out is the way to do it!

If you are up-to-date on your Russian firearms, the PPK-20 must have caught your eye! The latest iteration of the PP-19 Vityaz platform, the PPK-20 further modernises the AK-style SMG with an adjustable side folding stock, the AK-12 pistol grip and a compact suppressor. This, the ARCTURUS AEG replica is a limited run of only 500 pieces worldwide, so if you want one don't hesitate!

Your lack of hesitation will be rewarded when you get the PPK-20 in your hands. This beast is constructed almost entirely from steel, with a flawlessly realistic finish applied to the externals and the hefty feel an AK-derived platform deserves. On the inside, things are equally special as the PPK-20 is rocking a Perun Optical MOSFET, high torque motor, a plethora of reinforced internal components backed up by a new rotary TDC style HOP-up unit and a 6.01mm stainless steel tightbore inner barrel. If you are an AK kinda guy and you appreciate a fully upgraded platform with perfect realism, the PPK-20 will definitely put a smile on your face!

If you are stuck between an upgraded pistol or a GBB SMG for CQB or sniper backup duty, why not get both in one? The APS Black Hornet Plus GBB SMG is a complete set including a unique upgraded EU18 style GBB pistol, an APS carbine kit and a proper laundry list of accessories so you can run it either as a fully decked-out SMG or a suppressed pistol at your leisure.

This kit represents great value when you consider the plethora of accessories and options included. The heart of this beast, whether you run it in the carbine kit or as a suppressed pistol is its extended 47rnd CO2 magazine and 165mm 6.03mm steel tightbore inner barrel giving it the power, gas efficiency, cold resistance and range to outdo practically anything its size. If you struggle to choose between a GBB pistol and SMG, now you don't have to!

The UMG models are great, but wouldn't it be great if we just had something a little more modern? Introducing the G&G PCC45, the 21st Century rendition of the very tired UMG style platform.

If you are familiar with modern Russian firearms, then you must have instantly recognised this PPK-20! It is the latest iteration of the PP-19 Vityaz platform and it further develops the AK-style SMG, featuring an adjustable slide folding stock, an AK-12 grip and a compact threaded suppressor. This mean-looking SMG will definitely lay waste to any skirmishers who are unfortunate enough to encounter you during a CQB!

This monster is constructed almost entirely from steel, with a flawlessly realistic finish applied to the externals and the hefty feel that an AK-derived platform deserves. On the inside, things are equally special as the PPK-20 is rocking an Optical MOSFET, high torque motor, a plethora of reinforced internal components, a rotary style HOP-up unit and a 6.01mm stainless steel tightbore inner barrel. If you are an AK kinda guy and you appreciate a fully upgraded platform with perfect realism, the PPK-20 will absolutely put a smile on your face!